KIT | KIT-Bibliothek | Impressum | Datenschutz

Fused Filament Fabrication of Small Ceramic Components

Nötzel, Dorit 1; Eickhoff, Ralf 1; Hanemann, Thomas 1
1 Karlsruher Institut für Technologie (KIT)

Abstract:

With respect to rapid prototyping of ceramic components, there are known only a few processes (stereo lithography, binder jetting). In this work, a new process chain is described in detail, showing that ceramics can be printed in a very cost-efficient way. We developed a ceramic–polymer composite as filament material that can be printed on a low-cost fused filament fabrication (FFF) desktop printer, even with very small nozzle sizes enabling very small geometric feature sizes. The thermal post-processing, with debinding and sintering, is very close to the ceramic injection molding (CIM) process chain.


Verlagsausgabe §
DOI: 10.5445/IR/1000085541
Veröffentlicht am 28.08.2018
Originalveröffentlichung
DOI: 10.3390/ma11081463
Scopus
Zitationen: 81
Web of Science
Zitationen: 63
Dimensions
Zitationen: 82
Cover der Publikation
Zugehörige Institution(en) am KIT Institut für Angewandte Materialien – Werkstoffkunde (IAM-WK)
Publikationstyp Zeitschriftenaufsatz
Publikationsjahr 2018
Sprache Englisch
Identifikator ISSN: 1996-1944
urn:nbn:de:swb:90-855418
KITopen-ID: 1000085541
HGF-Programm 43.22.03 (POF III, LK 01) Printed Materials and Systems
Erschienen in Materials
Verlag MDPI
Band 11
Heft 8
Seiten 1463-1473
Bemerkung zur Veröffentlichung Gefördert durch den KIT-Publikationsfonds
Vorab online veröffentlicht am 17.08.2018
Schlagwörter 3D printing; FFF; FDM; polymer-ceramic composite; ceramic printing; rapid prototyping
Nachgewiesen in Dimensions
Scopus
Web of Science
KIT – Die Forschungsuniversität in der Helmholtz-Gemeinschaft
KITopen Landing Page