The Use of Polyurethane Composites with Sensing Polymers as New Coating Materials for Surface Acoustic Wave-Based Chemical Sensors—Part I: Analysis of the Coating Results, Sensing Responses and Adhesion of the Coating Layers of Polyurethane–Polybutylmethacrylate Composites

The sensing layers for surface acoustic wave-based (SAW) sensors are the main factor in defining the selectivity and reproducibility of the responses of the sensor systems. Among the materials used as sensing layers for SAW sensors, polymers present a wide range of advantages, from availability to a large choice of chemical-sensing environments. However, depending on the physical–chemical properties of the polymer, issues about the chemical and mechanical stability of the sensing layer have been reported that can compromise the application of sensor systems in the long-term. The sensor properties are defined basically by the properties of the coating material and the quality of the coating process. The strategy used to improve the properties of polymeric coating layers for SAW technology involved the use of polyurethane (PU) in combination with a second polymer that is responsible for the sensing properties of the resulting layer; this is obtained by a reproducible and robust coating procedure. In this first part of our research, we used polymer composites of different compositions of polybutylmetacrylate (PBMA) as the sensing polymer with polyurethane. ... mehrThe analysis of the coating (ultrasonic parameters), the relative sensor responses and the adhesion results for the PU–PBMA composites were determined. The ultrasonic analysis and the relative sensor responses showed very reproducible and precise results, indicating the reproducibility and robustness of the coating process. Accurate correlations between the results of the ultrasonic parameters due to the coating and the relative sensor responses for the organic analytes analyzed were obtained, showing a precise quantitative relationship between the results and the constitution of the composite coating materials. The composites show practically no significant sensor responses to water. The PU–PBMA composites substantially enhanced adhesion to the surface of the piezoelectric sensor element in comparison to the coating with pure PBMA, without loss of its sensing properties. Other PU–polymer composites will be presented in the future, as well as an analysis of the selectivity for the organic analytes for these types of coating materials.