Abstract:
Die Entwicklung heller und biokompatibler Nanopartikel auf Basis seltener Erden hat in den letzten Jahren zunehmendes Interesse geweckt, insbesondere im Hinblick auf die Verbesserung ihrer Photolumineszenz-Effizienz. Unter den verschiedenen untersuchten Strategien haben sich Core–Shell-Architekturen als besonders vielversprechend erwiesen. Trotz erheblicher Fortschritte bei der Effizienzsteigerung wurde jedoch der räumlichen Verteilung der optisch aktiven Ionen in diesen Nanostrukturen, insbesondere nach dem Wachstum der Schale, bislang wenig Aufmerksamkeit geschenkt. Eine weit verbreitete Annahme in diesem Forschungsfeld besagt, dass der Kern während des Schalenwachstums strukturell und chemisch unverändert bleibt. ... mehrDiese Vorstellung wurde jedoch weitgehend ohne direkte experimentelle Bestätigung akzeptiert und könnte subtile, aber entscheidende strukturelle Phänomene an der Kern-Schale-Grenzfläche übersehen. Diese Arbeit hinterfragt diese Annahme und zeigt, dass es möglich ist, eine klar segregierte Kern- und Schalenregion zu erzeugen – jedoch nur unter sehr spezifischen Bedingungen. Untersucht wurde dies durch die Analyse der räumlichen Verteilung der optisch aktiven Ionen, die ursprünglich ausschließlich im Kern verbleiben sollten, und wie sich diese Verteilung nach dem Schalenwachstum verändert. Durch die Untersuchung der Ionenverteilung lässt sich ein Zusammenhang zwischen bestimmten Synthesebedingungen und dem Kationen-Migrationsverhalten herstellen, was eine gezieltere Gestaltung von Nanostrukturen für spezifische Anwendungen ermöglicht.
Eine besonders vielversprechende Anwendung ist die Fluoreszenzbildgebung im kurzwelligen Infrarotbereich (SWIR). Diese bietet im Vergleich zu herkömmlichen optischen Verfahren entscheidende Vorteile, darunter geringere Gewebestreuung, minimale Autofluoreszenz und größere Eindringtiefe. Ihre breite Anwendung wird jedoch durch die geringe Quantenausbeute (PLQY) derzeit verfügbarer Nanopartikel eingeschränkt. Zur Lösung dieses Problems untersucht diese Arbeit systematisch die strukturellen, chemischen und synthetischen Einflussfaktoren auf die Kationenintermischung und die optische Leistungsfähigkeit seltenerdhaltiger Core–Shell-Nanokristalle.
Im ersten Teil dieser Arbeit wird gezeigt, dass die Verwendung einer konventionellen NaYF4-Schale auf einem -NaYF4:Yb,Er(Ce)-Kern zu starker Kationenintermischung führt, wobei optisch aktive Ionen aus dem Kern in die Schale migrieren. Im Gegensatz dazu konnte durch den Einsatz von CaF2 als Schalenmaterial auf demselben Kern eine klare Phasensegregation erzielt werden. Dies führte zur Bildung einer wohlstrukturierten -NaYF4:Yb,Er(Ce)/CaF2-Heterostruktur, in der die Kationenintermischung effektiv unterdrückt wurde. Die resultierende chemisch reine und strukturell definierte Schale reduzierte Oberflächenabschreckungseffekte und führte zu einer PLQY von 50 % – einem der höchsten bisher berichteten Werte für Nanokristalle unter 15 nm mit Emission im SWIR-Bereich. Diese Nanokristalle wurden anschließend erfolgreich für in vivo Bildgebung über 1450 nm eingesetzt, was ihr praktisches Potenzial für biomedizinische Anwendungen unterstreicht.
Aufbauend auf diesen Ergebnissen untersucht der zweite Teil der Arbeit verschiedene Materialkombinationen basierend auf -NaTmF4- und LiTmF4-Kernen, kombiniert mit NaYF4-, CaF2- und LiYF4-Schalen. Die strukturelle Analyse ergab, dass nur bestimmte Kombinationen zu gut definierten Core–Shell-Architekturen führten. Eine Phasensegregation konnte nicht nur in der heterogenen Kombination NaYF4:Yb,Er(Ce)/CaF2, sondern auch in der homogenen Kombination LiTmF4/LiYF4 beobachtet werden – trotz moderater Intermischung. Im Gegensatz zu -NaYF4 konnten jedoch keine der heterogenen Kombinationen mit LiTmF4-Kernen die optisch aktiven Ionen vollständig im Kernbereich halten. Es zeigte sich jedoch, dass bereits eine reine Schale mit einer Dicke von mindestens 3 nm ausreicht, um eine hohe PLQY zu erzielen, wie am Beispiel des LiTmF4/LiYF4-Systems mit einer PLQY von 39 % oberhalb von 1600 nm demonstriert wurde. Diese Ergebnisse deuten darauf hin, dass zwar scharfe Grenzflächen vorteilhaft sind, jedoch die Fähigkeit der Schale, die optisch aktiven Ionen räumlich zu begrenzen, eine entscheidendere Rolle für eine effiziente Energieumwandlung spielt.
Im dritten und letzten Teil dieser Arbeit wird der Einfluss intrinsischer (Kristallstruktur, Materialzusammensetzung) und extrinsischer (Schalendicke, Synthesetemperatur, Wachstumsmethodik) Parameter auf das Ausmaß der Intermischung und die Emissionseffizienz systematisch untersucht. Eine anhaltende Intermischung wurde bei homogenen Core–Shell-Systemen aus -NaTmF4 und -NaGdTmF4 beobachtet, während die heterogene Kombination -NaTmF4/CaF2 sowie die homogene Kombination LiTmF4/LiYF4 – durch gezielte Kontrolle extrinsischer Parameter – eine starke räumliche Trennung der Aktivatorenionen und hohe PLQYs aufwiesen. Diese Ergebnisse zeigen einen klaren Zusammenhang zwischen intrinsischen und extrinsischen Eigenschaften sowie deren Einfluss auf Grenzflächenorganisation, Ionenverteilung und Energieumwandlungseffizienz.
Insgesamt bietet diese Arbeit einen umfassenden Rahmen zum Verständnis und zur gezielten Kontrolle der Grenzflächenorganisation in Core–Shell-Nanokristallen auf Fluoridbasis mit Seltenen Erden. Die gewonnenen Erkenntnisse liefern praxisnahe Gestaltungsprinzipien für die Entwicklung hocheffizienter SWIR-Nanopartikel mit Relevanz für eine Vielzahl biomedizinischer Anwendungen.
Abstract (englisch):
The development of bright and biocompatible rare-earth (RE3+)-based nanoprobes has attracted growing interest in recent years, particularly in efforts to enhance their photoluminescence efficiency. Among the various strategies explored, the formation of core–shell architectures has consistently yielded the most promising results. However, despite significant progress in improving emission efficiency, little attention has been paid to understanding the spatial distribution of the optically active ions in these nanostructures, especially after shell growth. A prevailing assumption in the field has been that the core remains structurally and compositionally intact during shell formation; yet, this notion has been accepted without direct experimental validation and may overlook subtle but critical interfacial structural patterns. ... mehrThis thesis challenges that assumption and demonstrates that it is possible to obtain a segregated core and shell area, but only under very specific conditions. This was investigated by tracking the spatial distribution of optically active ions originally intended to remain confined to the core, and by characterizing how that distribution changes after shell growth. By analyzing the ion organization after the shell growth, it becomes possible to correlate specific synthetic conditions with cation migration, enabling more rational design of nanostructures for specific applications. Among these, short-wave infrared (SWIR) fluorescence imaging stands out as a particularly compelling area. SWIR imaging offers key advantages over traditional optical modalities, including reduced tissue scattering, minimal autofluorescence, and increased penetration depth. Nonetheless, its broader implementation is limited by the low photoluminescence quantum yield (PLQY) of current nanoprobes. To address this challenge, this thesis systematically investigates the structural, chemical, and synthetic factors that govern cation intermixing and optical performance in RE-based core–shell nanocrystals (NCs).
The first part of this work demonstrates that using the conventional -NaYF4 shell on NaYF4:Yb,Er(Ce) core NCs led to significant cation intermixing, where the optically active ions migrate from the core into the shell region. In contrast, when CaF2 was employed as the shell material on the same -NaYF4:Yb,Er(Ce) core, clear phase segregation was achieved. This resulted in the formation of a well-defined NaYF4:Yb,Er(Ce)/CaF2 heterostructure, in which cation intermixing was effectively suppressed. The formation of a chemically pure and structurally distinct shell mitigated surface quenching effects and led to a PLQY of 50%, one of the highest values reported for sub-15 nm NCs emitting in the SWIR region. These NCs were further used for SWIR in vivo imaging above 1450 nm, highlighting their practical potential for biomedical applications.
Building upon the data, the second part of the thesis explores different material combinations based on -NaTmF4 and LiTmF4 cores paired with -NaYF4, CaF2, and LiYF4 shells. Structural analysis revealed that only select combinations led to well-defined core–shell architectures, and the phase segregation is not only achieved with the heterogeneous combination of -NaYF4:Yb,Er(Ce)/CaF2, but also with the homogeneous combination of LiTmF4/LiYF4 (despite a moderate intermixing). In contrast to the -NaYF4 studied previously, none of the heterogeneous materials combinations using LiTmF4 as seeds managed to confine the optically active ions in the core region. Nevertheless, the results showed that having at least 3 nm of pure shell gives high PLQY results, as LiTmF4/LiYF4 system achieved a PLQY of 39% above 1600 nm. This indicates that while abrupt interfaces are beneficial, the presence of a shell capable of spatially confining the optically active ions is of greater importance for maximizing the energy conversion.
The third and final part of this thesis systematically examines the influence of intrinsic (crystal structure, material composition) and extrinsic (shell thickness, synthesis temperature, and growth methodology) parameters on the degree of intermixing and emission efficiency. Persistent intermixing was observed in homogeneous core–shell systems of -NaTmF4 and -NaGdTmF4; whereas the heterogeneous material combination of -NaTmF4/CaF2 and the homogeneous combination of LiTmF4/LiYF4 consistently exhibited strong spatial confinement of activator ions and high PLQYs, through the modifications of extrinsic properties. These findings establish a direct correlation between intrinsic-extrinsic properties and interfacial organization, ion distribution, and energy conversion efficiency.
Altogether, this work provides a comprehensive framework for understanding and controlling the interfacial organization of RE-based fluoride core–shell NCs. The insights presented here offer practical design principles for the development of high-efficiency SWIR nanoprobes, with implications for a range of biomedical applications.