Development and analysis of a turbulence model for buoyant flows Carteciano, L. N.; Weinberg, D.; Müller, U. 1997. Giot, M. [Hrsg.] Proc.of the 4th World Conf.on Experimental Heat Transfer, Fluid Mechanics and Thermodynamics, Bruxelles, B, June 2-6, 1997 Vol. 3 Pisa : Edizioni ETS, 1997, 1339–46
Operating experience with a coaxial gyrotron with a dual rf-beam output Piosczyk, B.; Braz, O.; Dammertz, G.; Kuntze, M.; Michel, G.; Möbius, A.; Thumm, M. 1997. Thumm, M. [Hrsg.] Proc.of the 9th Joint Russian-German Meeting on ECRH and Gyrotrons, Karlsruhe/Stuttgart/Garching, June 25 - July 1, 1997, 11–22
High power tests on a 170 GHz diamond window Thumm, M.; Braz, O.; Imai, T.; Henry, S.; Kasugai, A.; Sakamoto, K.; Takahashi, K.; Tsuneoka, M. 1997. Thumm, M. [Hrsg.] Proc.of the 9th Joint Russian-German Meeting on ECRH and Gyrotrons, Karlsruhe/Stuttgart/Garching, June 25 - July 1, 1997, 175–80
Activities on millimeterwave sintering of ceramics at Forschungszentrum Karlsruhe Link, G.; Thumm, M.; Bauer, W.; Ritzhaupt-Kleissl, H. J.; Weddigen, A.; Böhme, R.; Weisenburger, A. 1997. Thumm, M. [Hrsg.] Proc.of the 9th Joint Russian-German Meeting on ECRH and Gyrotrons, Karlsruhe/Stuttgart/Garching, June 25 - July 1, 1997, 283–94
Nanocrystalline oxide ceramics sintered under gyrotron radiation Link, G.; Weisenburger, A.; Böhme, R.; Thumm, M. 1997. Breccia, A. [Hrsg.] Microwave and High Frequency Heating 1997 : Proc.of the Conf., Fermo, I, September 9-13, 1997 Bologna : Universita di Bologna, 1997, 439–42
Modelling turbulent dissipation rate for Rayleigh-Benard convection Ye, Q. Y.; Wörner, M.; Grötzbach, G.; Jovanovic, J. 1997. Turbulence, Heat and Mass Transfer : 2 ; Proceedings of the 2nd international symposium on turbulence, heat and mass transfer., Delft, NL, June 9-12, 1997. Ed.: K. Hanjalic, 331–40, Delft University of Technology (TU Delft)
Results of the IAEA benchmark on lifetime predictions of first wall components Diegele, E.; Beghini, M.; Bertini, L.; Horie, T.; Jakeman, R.; Klischenko, A.; Matera, R.; Merola, M.; Munz, D.; Seki, M.; Suzuki, S.; Vieider, G. 1997. 7th Internat.Conf.on Fusion Reactor Materials (ICFRM-7), Obninsk, GUS, September 25-29, 1995 Journal of Nuclear Materials, 233-237(1996), 62–71
Der Druckzwiesel im Wald und in der Stadt Mattheck, C.; Bethge, K. 1997. 3.VTA-Spezialseminar ’Messen und Beurteilen am Baum’, Karlsruhe, April 23-24, 1997 Tagungsband
Schubrisse und Wachstumsspannungen Mattheck, C.; Bethge, K. 1997. 3.VTA-Spezialseminar ’Messen und Beurteilen am Baum’, Karlsruhe, April 23-24, 1997 Tagungsband
Der Schneebruch - ein Kind des Phototropismus Mattheck, C.; Bethge, K.; Götz, K. 1997. 3.VTA-Spezialseminar ’Messen und Beurteilen am Baum’, Karlsruhe, April 23-24, 1997 Tagungsband
Status of the 118 GHz - 0.5 MW quasi CW gyrotron for Tore Supra and TCV tokamaks Giguet, E.; Thouvenin, P.; Tran, C.; Garin, P.; Pain, M.; Alberti, S.; Tran, M. Q.; Thumm, M. 1997. Freund, H.P. [Hrsg.] 22nd Internat.Conf.on Infrared and Millimeter Waves, Wintergreen, Va., July 20-25, 1997 Conference Digest Washington, D.C. : IEEE, 1997, 104–05
Scattering Matrix description of complete gyrotron oscillators Wagner, D.; Gantenbein, G.; Kasparek, W.; Thumm, M.; Idehara, T. 1997. Freund, H.P. [Hrsg.] 22nd Internat.Conf.on Infrared and Millimeter Waves, Wintergreen, Va., July 20-25, 1997 Conference Digest Washington, D.C. : IEEE, 1997, 156–57
Positioning system for catheter tips based on an active microvalve system Ruzzu, A.; Bade, K.; Fahrenberg, J.; Maas, D. 1997. MME ’97 - Micromechanics Europe : 8th Workshop on Micromachining, Micromechanics and Microsystems, Southampton, GB, August 31 - September 2, 1997 Technical Digest University of Southampton, 1997, 211–14
Chancen und Risiken der Chlorchemie am Beispiel PVC Jeske, U.; Möller, R. 1997. Weingarten, J. [Hrsg.] Die Zukunft der Chemie mit Chlor. Ausstieg oder zukunftsorientierte Anwendung? ; Dokumentation der ZIRP-Fachtagung, Ludwigshafen, 28.November 1996 Idar-Oberstein : Dr.Gebhard u. Hilden GmbH, 1997, 49–73
Skull melting of semiconducting materials Barleon, L.; Burr, U.; Mack, K. J. 1997. Electromagnetic Processing of Materials : Internat.Congress, Paris, F, May 27-29, 1997 Conf. Proc. Paris : Centre Francais de l’Electricite, 1997, 315–20
Very high energy cosmic ray interactions Rebel, H.; Schatz, G.; Knapp, J. 1997. Proc.of the 9th Internat.Symp., Karlsruhe, August 19-23, 1996 Nuclear Physics B, Proc.Suppl., 52B(1997)
Mechanistic aspects of the de-novo-synthesis of PCDD/PCDF on model fly ash Hell, K.; Stieglitz, L.; Zwick, G.; Will, R. 1997. Hites, R. [Hrsg.] DIOXIN ’97 : 17th Internat.Symp.on Chlorinated Dioxins, PCB and Related Compounds, Indianapolis, Ind., August 25-29, 1997 Submitted Papers (Organohalogen Compounds ; 31), 492–96
Experimental investigations of the dipole moment of La(at)C₈₂ Fuchs, D.; Rietschel, H. 1997. Kuzmany, H. [Hrsg.] Fullerenes and Fullerene Nanostructures : Proc.of the Internat.Winterschool on Electronic Properties of Novel Materials, Kirchberg, A, March 2-9, 1996 Singapore [u.a.] : World Scientific Publ.Co., 1996, 186–90
The formation of PCB on fly ash and conversion to PCDD/PCDF Scholz, M.; Stieglitz, L.; Will, R.; Zwick, G. 1997. Hites, R. [Hrsg.] DIOXIN ’97 : 17th Internat.Symp.on Chlorinated Dioxins, PCB and Related Compounds, Indianapolis, Ind., August 25-29, 1997 Submitted Papers (Organohalogen Compounds ; 31), 538–41
Operation of a coaxial gyrotron with a dual rf-beam output Piosczyk, B.; Braz, O.; Dammertz, G.; Iatrou, C. T.; Kern, S.; Kuntze, M.; Michel, G.; Möbius, A.; Thumm, M.; Flyagin, V. A.; Khishnyak, V. I.; Pavelyev, A. B.; Zapevalov, V. E. 1997. Freund, H.P. [Hrsg.] 22nd Internat.Conf.on Infrared and Millimeter Waves, Wintergreen, Va., July 20-25, 1997 Conference Digest Washington, D.C. : IEEE, 1997, 114–15
Fatigue behaviour of polymers and composites at cryogenic temperatures Hartwig, G.; Hübner, R.; Knaak, S. 1997. Summers, L.T. [Hrsg.] Proc.of the 11th Internat.Cryogenic Materials Conf.(ICMC), Columbus, Ohio, July 17-21, 1995 New York [u.a.] : Plenum Press, 1997 (Advances in Cryogenic Enerineering ; 42A), 155–59
Fracture behavior of polymers at cryogenic temperatures Christoph, G.; Hartwig, G. 1997. Summers, L.T. [Hrsg.] Proc.of the 11th Internat.Cryogenic Materials Conf.(ICMC), Columbus, Ohio, July 17-21, 1995 New York [u.a.] : Plenum Press, 1997 (Advances in Cryogenic Enerineering ; 42A), 7–12
Fatigue of crossply carbon fiber composites at cryogenic temperatures Hübner, R.; Hartwig, G. 1997. Summers, L.T. [Hrsg.] Proc.of the 11th Internat.Cryogenic Materials Conf.(ICMC), Columbus, Ohio, July 17-21, 1995 New York [u.a.] : Plenum Press, 1997 (Advances in Cryogenic Enerineering ; 42A), 233–40
A novel vibration-isolation system for MIPAS-STR Breitbach, H.; Fehren, H.; Holst, M.; Sartorius, C.; Piesch, C. 1997. Proc.of the 3rd Internat.Airborne Remote Sensing Conf.and Exhibition, Kopenhagen, DK, July 7-10, 1997 Vol.II Ann Arbor, Mich. : ERIM Internat.Inc., 1997, 724–31
Waste combustion and the dioxin issue Vehlow, J. 1997. KIST Europe Environmental Technology Workshop, Saarbrücken, February 13-14, 1997 Tagungsbd., 21–30
Micromechanical testing of microstructured actuator components Hagena, O. F. 1997. Proc.of the Internat.Conf.on Advanced Technology in Experimental Mechanics (ATEM ’97), Wakayama, J, July 25-26, 1997 Tokyo : The Japan Society of Mechanical Engineers, 1997, 5–10
μEDM technique for the fabrication of miniaturized neurosurgical instruments Guber, A. E.; Baldinus, O.; Giordano, N.; Loser, M.; Moryson, R.; Wieneke, P. 1997. Kunzmann, H. [Hrsg.] Progress in Precision Engineering and Nanotechnology : Proc.of the 9th Internat.Precision Engineering Seminar and of the 4th Internat.Conf.on Ultraprecision in Manufacturing Engineering, Braunschweig, May 26-30, 1997 Braunschweig : Physikalisch-Technische Bundesanstalt, 1997 Vol.2, 665–68
Fabrication of PMMA based microlenses using the LIGA-process Ossmann, C.; Göttert, J.; Ilie, M.; Mohr, J.; Ruther, P. 1997. Microlens Arrays : Proc.of a Conf., Teddington, GB, May 15-16, 1997 European Optical Society, 1997 (EOS Topical Meetings Digest Series ; 13), 54–58
Stresses and fracture in ceramic-metal joints Brückner-Foit, A.; Munz, D.; Tilscher, M.; Yang, Y. Y. 1997. Fracture Mechanics of Ceramics New York [u.a.] : Plenum Pr. Vol. 12. Fatigue, Composites, and High-Temperature Behavior : 2nd Part of the Proc.of the 6th Internat.Symp.on the Fracture Mechanics of Ceramics, Karlsruhe, July 18-20, 1995 1996, 463–74
Structural materials for advanced reactor systems Dietz, W.; Ehrlich, K.; Picker, C.; Tavassoli, A. A. 1997. EUROMAT ’96 : Conf.on Materials and Nuclear Power, Bournemouth, GB, October 21-23, 1996 London : The Institute of Materials, 1996, 243–55
1.2 MW coaxial cavity gyrotrons in the frequency range 115-170 GHZ Thumm, M.; Braz, O.; Dammertz, G.; Iatrou, C. T.; Kern, S.; Kuntze, M.; Michel, G.; Möbius, A.; Piosczyk, B. 1997. Mikrowellen und Optronik : 9. Kongressmesse fuer Hochfrequenztechnik, Funkkommunikation und elektromagnetische Verträglichkeit, Sindelfingen, 22.-24.April 1997 Proc. Hagenburg : NETWORK GmbH, 1997, 96–100
MHD turbulence generation in bends perpendicular to the magnetic field Reimann, J.; Dementjev, S.; Flerov, A.; Platnieks, I. 1997. Varandas, C. [Hrsg.] Fusion Technology 1996 : Proc.of the 19th Symp., Lisboa, P, September 16-20, 1996 Amsterdam [u.a.] : Elsevier, 1997 Vol.2, 1531–34
Numerical simulation of packed bed combustion Peters, B. 1997. 4th European Conf.on Industrial Furnaces and Boilers, Porto, P, April 1-4, 1997 Preprints Vol. II: Alternative Fuels and Waste Heat Recovery Modelling of Furnaces and Combustion Systems Pollution Systems
Corrosion of zirconia ceramics in acidic solutions at high pressures and temperatures Schacht, M.; Boukis, N.; Dinjus, E.; Ebert, K.; Janssen, R.; Meschke, F.; Claussen, N. 1997. Abelard, P. [Hrsg.] Euro Ceramics : 5 ; Extended Abstracts of the 5th Conf.and Exhibition of the European Ceramic Society, Versailles, F, June 22-26, 1997 Zürich-Ütikon [u.a.] : Trans Tech Publ., 1997 (Key Engineering Materials ; 132-136), 1677–82