KIT | KIT-Bibliothek | Impressum | Datenschutz

Optimization-based procedure for the determination of the constitutive model coefficients used in machining simulations

Cheng, W.; Outeiro, J.; Costes, J.-P.; M’Saoubi, R.; Karaouni, H.; Dietrich, S.; Marcon, B.; Rosa, P.

Abstract:
This paper deals with the determination of the constitutive model coefficients used in machining simulations. An optimization-based procedure is developed and applied to constitutive model coefficients determination of Ti6Al4V titanium alloy. The procedure is implemented in LS-Dyna/LS-Opt software, coupled with Abaqus/Explicit to calculate the force-displacement curve at each iteration, which is required for the optimization-based procedure. The robustness of the procedure to determine the constitutive model coefficients is evaluated by comparing the predicted and measured plastic strain distributions in the samples.

Open Access Logo


Verlagsausgabe §
DOI: 10.5445/IR/1000098075
Veröffentlicht am 06.09.2019
Originalveröffentlichung
DOI: 10.1016/j.procir.2019.04.057
Coverbild
Zugehörige Institution(en) am KIT Institut für Angewandte Materialien - Werkstoffkunde (IAM-WK)
Publikationstyp Zeitschriftenaufsatz
Jahr 2019
Sprache Englisch
Identifikator ISSN: 2212-8271
KITopen-ID: 1000098075
Erschienen in Procedia CIRP
Band 82
Seiten 374-378
Bemerkung zur Veröffentlichung 17th CIRP Conference on Modelling of Machining Operations (CIRP CMMO)
Schlagworte Modelling; Machining; Constitutive model
Nachgewiesen in Scopus
KIT – Die Forschungsuniversität in der Helmholtz-Gemeinschaft
KITopen Landing Page