On the dependence of orientation averaging mean field homogenization on planar fourth-order fiber orientation tensors

A comprehensive study on the influence of planar fourth-order fiber orientation tensors on effective linear elastic stiffnesses predicted by orientation averaging mean field homogenization is given. Fiber orientation states of sheet molding compound (SMC) are identified to be in most cases approximately planar. In the planar case, all possible fourth-order fiber orientation tensors are given by a minimal invariant set of structurally differing planar fourth-order fiber orientation tensors. This set defines a three-dimensional body and forms the basis for a comprehensive study on the influence of a fiber orientation distribution in terms of a fourth-order tensor on homogenized stiffnesses. The methodology of this study is the main contribution of this work and can be adopted to analyze the orientation dependence of any quantity which is a function of a planar fourth-order fiber orientation tensor. At specific points inside the set of planar fiber orientation tensors, effective stiffnesses are calculated with selected mean field homogenization schemes. These schemes are based on orientation averaging of transversely isotropic elasticity tensors following Advani and Tucker (1987), which is explicitly recast as linear invariant composition in the fiber orientation tensors of second and fourth order of Kanatani third kind. ... mehrA maximum entropy reconstruction of a fiber orientation distribution function based on leading fiber orientation tensors, enables a new numerical formulation of the Advani and Tucker average for the special planar case. Polar plots of Young’s modulus and generalized bulk modulus obtained by selected homogenization schemes are arranged on two-dimensional slices within the body of admissible fiber orientation tensors, visualizing the influence of the orientation tensor on the stiffness tensor. The orientation-dependence of the generalized bulk modulus differs significantly between selected homogenizations. Restrictions on the effective anisotropic material response caused by orthotropy of closure approximations are discussed.