Reaeration
Jirka, G. H.; Herlina
2008. Encyclopedia of Ecology, 2975–2981, Elsevier. doi:10.1016/b978-008045405-4.00289-5 

Parametrisierung der subskaligen Konvektion für Spurenstoffe mittels des Tiedtke-Schemas in COSMO-ART. diploma thesis
Tröndle, T.
2008. Karlsruher Institut für Technologie (KIT) 

Berücksichtigung des Einflusses von anthropogenem Aerosol auf warme Wolken in COSMO-ART. diploma thesis
Bangert, M. J.
2008. Karlsruher Institut für Technologie (KIT) 

Preparation and Conformation of Organo-Bridged Bis[tris(arylchalcogenolato)tin] Compounds - An Experimental and Quantum Chemical Study
Nayek, H. P.; Niedermeyer, H.; Dehnen, S.
2008. Zeitschrift für anorganische und allgemeine Chemie, 634 (15), 2805–2810. doi:10.1002/zaac.200800263 

Synthesis and Characterization of the First Salts of the ortho -Selenidoindate Anion [InSe${}_4$]${}^{5-}$
Heine, J.; Dehnen, S.
2008. Zeitschrift für anorganische und allgemeine Chemie, 634 (12-13), 2303–2308. doi:10.1002/zaac.200800233 

A Heterometallic, Heterovalent Cu${}^I$/Sn${}^{II/IV}$/S Cluster with an Unprecedented Cu${}_4$Sn Core and Stannacyclopentane Units
Nayek, H. P.; Massa, W.; Dehnen, S.
2008. Inorganic Chemistry, 47 (20), 9146–9148. doi:10.1021/ic8013877 

One-Size Adjustable-Gap Cluster Anions: Systematic Approach to Multinary, Water-Soluble Chalcogenidometalate Compounds
Lips, F.; Dehnen, S.
2008. Inorganic Chemistry, 47 (13), 5561–5563. doi:10.1021/ic8008199 

Syntheses and Structures of Organotin(IV) Thioesters of $N$-Phthaloylamino Acids
Fard, Z. H.; Müller, C.; Dehnen, S.
2008. Zeitschrift für anorganische und allgemeine Chemie, 634 (11), 1851–1856. doi:10.1002/zaac.200800195 

Syntheses, Structures and Reactivity of Novel Hydrates of ortho-Sulfidostannte Salts
Ruzin, E.; Jakobi, S.; Dehnen, S.
2008. Zeitschrift für anorganische und allgemeine Chemie, 634 (6-7), 995–1001. doi:10.1002/zaac.200800004 

Upper limit on the diffuse flux of UHE tau neutrinos from the Pierre Auger Observatory
Bergmann, T.; Blümer, H.; Caballero-Mora, K. S.; De Souza, V.; Gonzalez, D.; Góra, D.; Keilhauer, B.; Maris, I. C.; Ostapchenko, S.; Schmidt, T.; Tamburro, A.; et al.
2008 

In-plane and out-of-plane couplers for optical printed circuit boards and optical backplanes
Schneider, M.; Kuhner, T.; Mohr, J.; Kohler, U.
2008. 2008 IEEE Nuclear Science Symposium Conference Record, 3536–3541, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/NSSMIC.2008.4775099 

Coupling elements for optical printed circuit boards with precision molded alignment structures
Schneider, M.; Kuhner, T.
2008. 2008 58th Electronic Components and Technology Conference, 27-30 May 2008, Lake Buena Vista, FL, USA, 276–282, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/ECTC.2008.4549982 

Is Exercise a Determinant of Health? Or Vice Versa?
Jekauc, D.; Woll, A.; Tittlbach, S.; Bös, K.
2008. Informations- und Kommunikationstechnologien in der Sportmotorik. Abstractband zur 11. Tagung der dvs-Sektion Sportmotorik. Hrsg.: S. Baumgärtner, 37 

Sozialistische Autokultur
Möser, K.
2008, July 31 

Entwicklung einer geschlossenen Auslegungsmethodik zur Modellierung und Optimierung des mechanischen Gesamtsystemverhaltens von Parallelkinematiken
Fleischer, J.; Albers, A.; Minx, J.; Broos, A.; Tröndle, M.
2008. Fertigungsmaschinen mit Parallelkinematiken. Hrsg.: Uwe Heisel, 97–118, Shaker 

Fertigungsbedingte Produkteigenschaften - Fepro
Fleischer, J.; Kotschenreuther, J.; Pabst, R.
2008. Fertigungsbedingte Produkteigenschaften - FePro: Förderkennzeichen 02 PU 1010 ; Status und Perspektiven ; [Voruntersuchung]. Hrsg.: F. Klocke ..., Apprimus-Verl 

Potenziale zur Genauigkeitssteigerung durch die direkte Wegmessung bei Parallelkinematiken
Fleischer, J.; Munzinger, C.; Kipfmüller, M.
2008. Fertigungsmaschinen mit Parallelkinematik - Forschung in Deutschland: Hrsg.: Uwe Heisel, 261–278, Shaker 

Sustainable Design of Machine Tools through Load-Dependent Interventions and Adapted Services
Fleischer, J.; Schopp, M.; Broos, A.; Wieser, J.
2008. Manufacturing Systems and Technologies for the New Frontier : The 41st CIRP Conference on Manufacturing Systems May 26–28, 2008, Tokyo, Japan. Edited by Mamoru Mitsuishi, Kanji Ueda, Fumihiko Kimura, Springer 

Efficient Maintenance of Machine Tools - Adapted Maintenance Activities and Assembly-Specific Maintenance Intervals
Fleischer, J.; Wieser, J.; Schopp, M.; Broos, A.
2008. Manufacturing Systems and Technologies for the New Frontier: the 41st CIRP Conference on Manufacturing Systems, May 26-28, 2008, Tokyo, Japan. Ed.: Mamoru Mitsuishi ..., Springer 

Dämpfend fixierte Wendeschneidplatte verbessert die Standzeit beim Fräsen
Fleischer, J.; Pabst, R.; Becke, C.
2008. Maschinenmarkt, 64–67 

Mikroverzahnungsprüfkörper µ-DBA für evolventische Profillinienabweichungen
Fleischer, J.; Buchholz, I.; Härtig, F.; Dai, G.
2008. Technisches Messen, 75 (3), 168–177. doi:10.1524/teme.2008.0797 

Integration von Einkauf und Produktion
Fleischer, J.; Weiler, S.
2008. VDI-Z Integrierte Produktion, 74–77 

Schneidendämpfung optimiert Standzeit beim Drehen im unterbrochenem Schnitt
Fleischer, J.; Pabst, R.; Becke, C.
2008. Maschinenmarkt, (5), 38–42 

Optimierung und Bewertung kinematischer Konzepte
Munzinger, C.; Broos, A.; Ochs, A.; Schmidt-Ewig, J.-P.
2008. 5th Optimization and Stochastic Days 2008 : November 20-21, 2008, Dorint Hotel, Weimar, Germany : proceedings, 1–17, Dynardo GmbH 

Hybrid machine tool based on the combination of laser ablation and electrical discharge machining (EDM)
Schulze, V.; Weber, P.; Haupt, S.
2008. 2nd International Symposium on Laser-Micromachining (ISL 2008), 2. und 13. November 2008, Chemnitz 

Steigerung der Verfügbarkeit von Werkzeugmaschinen durch prozessparallele Last- und Verschleißüberwachung
Wagner, M.; Bayha, T.; Schopp, M.
2008. Life-cycle-Performance im Maschinen- und Anlagenbau: [wbk, Institut für Produktionstechnik, Universität Karlsruhe (TH)]. Ed.: Gisela Lanza, 114–132, Shaker 

Geometry Optimization of Micro Milling Tools
Fleischer, J.; Deuchert, M.; Kühlewein, C.; Ruhs, C.
2008. S. Dimov & W. Menz (Eds.), 4M 2008 : Fourth International Conference on Multi-Material Micro Manufacture ; 9th - 11th September 2008, Cardiff, UK. Ed. by Stefan Dimov and Wolfgang Menz, 275–278, Whittles 

Modeling the Heat Flux as an Input Parameter to Simulate Cutting Processes
Schulze, V.; Pabst, R.; Michna, J.
2008. R. W. I. Jarred C. Heigel Schawn P. Moylan (Ed.), Proceedings of the 11th CIRP International Conference on Modeling of Machining Operations Eds.: Jarred C. Heigel, Robert W. Ivester, Schawn P. Moylan, 155–162 

Zustandsabhängiger Einsatz von Remote Services - Berücksichtigung der tatsächlichen Belastungen für einen lebenszyklusoptimierten Betrieb
Schopp, M.
2008. 2. Jahrestagung "Globaler Remote Service im Maschinen- und Anlagenbau", 1.-5.6, Köln 

Design and manufacturing of micro milling tools
Fleischer, J.; Deuchert, M.; Ruhs, C.; Kühlewein, C.; Halvadjiysky, G.; Schmidt, C.
2008. (Springer, Ed.) Microsystem technologies, 1771–1775 

Influence of process parameters on the specific reaction forces and surface characteristics in orthogonal micro-cutting
Fleischer, J.; Schulze, V.; Deuchert, M.; Autenrieth, H.; Löhe, D.; Weber, A.
2008. Conference Proceedings 3rd International Conference on CIRP High Performance Cutting, 675–685, University College Dublin 

Simulation of Parallel Kinematics Based on Feedback Control Systems
Munzinger, C.; Kipfmüller, M.; Schmidt-Ewig, J. P.
2008. Conference Proceedings: CIRP ICME 08 - 6th CIRP International Conference on INTELLIGENT COMPUTATION IN MANUFACTURING ENGINEERING Innovative and Cognitive Production Technology and Systems. Ed.: Roberto Teti, University of Naples, Dept. of Materials and Production Engineering; CIRP, the International Academy for Production Engineering 

The automatic feeding of micro parts with flexible oscillating conveyors
Fleischer, J.; Munzinger, C.; Dieckmann, A.-M.; Prause, P.-J.; Bühner, K.; Tröndle, M.
2008. Proceedings of the 10th Anniversary International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2008, Volume 2, 10th Anniversary International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN, Zurich18 - 22 May 2008, 81–85, Euspen 

Automated Feeding of Micro Parts into a Measuring Machine
Fleischer, J.; Tröndle, M.; Ruprecht, E.; Dieckmann, A.-M.
2008. Proceedings of the 10th international conference of the European Society for Precision Engineering and Nanotechnology : May 31st - June 4th 2010, Delft, Netherlands. Ed.: H. Spaan ..., 98–101, Yokohama National University 

Cost Estimation for Service Contracts through the Monte-Carlo Simulation
Fleischer, J.; Rühl, J.
2008. LCE 2008: 15th CIRP International Conference on Life Cycle Engineering: Conference Proceedings, 547–552, University of New South Wales 

Optimization of Maintenance Activities through Maintenance-Relevant Design
Fleischer, J.; Wieser, J.; Hennrich, H.; Schopp, M.; Broos, A.
2008. CIRP Design Conference 2008 ; April 7 - 9, 2008, Enschede. Ed.: Fred J. A. M. van Houten, University of Twente 

Availability Increase of Machine Tools through Adapted Maintenance Activities and Assembly-Specific Maintenance Intervals
Fleischer, J.; Wieser, J.; Schopp, M.; Broos, A.
2008. LCE 2008: 15th CIRP International Conference on Life Cycle Engineering: Conference Proceedings, 388–393, University of New South Wales 

Adapting Machining Performance to Load and Wear Levels
Fleischer, J.; Schopp, M.; Broos, A.; Wieser, J.
2008. CIRP (Ed.), LCE 2008: 15th CIRP International Conference on Life Cycle Engineering: Conference Proceedings, 372–377, University of New South Wales 

Hybrid machining of microstructures using a combination of EDM-milling and laser ablation
Schulze, V.; Haupt, S.; Weber, P.
2008. The 1st International Conference on Nanomanufacturing (nanoMan2008), Singapore, 14th - 17th July 2007 

Modellierung des Wärmeeintrages bei der Trockenbearbeitung von Fahrzeugkomponenten aus Grauguss
Fleischer, J.; Pabst, R.; Zanger, F.
2008. Spanende Fertigung: Prozesse, Innovationen, Werkstoffe. Hrsg.: Klaus Weinert, 530–541, Vulkan-Verlag 

Lebenszyklusoptimierte Maschinen durch grenzlastnahen Einsatz von Maschinenelementen
Fleischer, J.; Munzinger, C.; Schopp, M.; Hennrich, H.; Broos, A.; Wieser, J.
2008. VDI (Ed.), Automation 2008 : Lösungen für die Zukunft ; Tagung Baden-Baden, 3. und 4. Juni 2008 ; [mit CD-ROM] / Der Automatisierungskongress in Deutschland. VDI/VDE-Gesellschaft Meß- und Automatisierungstechnik. [Tagungsleiter Kurt D. Bettenhausen ...], 101–104, VDI Verlag 

Landtransport
Popplow, M.
2008. Enzyklopädie der Neuzeit. Bd.: 7, 574–579, J.B. Metzler 

Mechanik, praktische
Popplow, M.
2008. Enzyklopädie der Neuzeit. Bd. 8. Hrsg.: F. Jaeger, 195–200, J.B. Metzler 

Maschine, Allgemein / Begriffsgeschichte / Metaphorische Verwendung
Popplow, M.
2008. Enzyklopädie der Neuzeit. Bd.: 8. Hrsg.: F. Jaeger, 71–80, J.B. Metzler 

E-learning system including test engine for the national test of foreign languages in Syria. bachelor’s thesis
Mazkatli, M.
2008 

An Empirical Investigation of the Effort of Creating Reusable, Component-Based Models for Performance Prediction
Martens, A.; Becker, S.; Koziolek, H.; Reussner, R.
2008. Component based software engineering : 11th international symposium, CBSE 2008, Karlsruhe, Germany, October 14 - 17, 2008 ; proceedings. Ed.: M. R. V. Chaudron, 16–31, Springer Verlag. doi:10.1007/978-3-540-87891-9_2 

An Empirical Investigation of the Applicability of a Component-Based Performance Prediction Method
Martens, A.; Becker, S.; Koziolek, H.; Reussner, R.
2008. Computer performance engineering : 5th European Performance Engineering Workshop, EPEW 2008, Palma de Mallorca, Spain, September 24-25, 2008 ; proceedings. Ed.: N. Thomas, 17–31, Springer Verlag. doi:10.1007/978-3-540-87412-6_3 

Leistungsüberprüfungen: Tendenzen bei Klausuren, Facharbeiten, Fachprüfungen und Abiturprüfungen
Schulz, N.; Wagner, I.
2008. Erprobungsvorhaben „Sport als 4. Fach der Abiturprüfung“ (2. Phase: 2006-2008), Abschlussbericht. Hrsg.: D. Kurz, 10–23 

Wie wird das pädagogische Potential des Faches genutzt? – Analysen auf der Basis von Unterrichts- und Prüfungsdokumentationen
Böhmer, F.; Schnitzler, D.; Schulz, N.; Wagner, I.
2008. Erprobungsvorhaben „Sport als 4. Fach der Abiturprüfung“ (2. Phase: 2006-2008). Abschlussbericht. Hrsg.: D. Kurz, 28–57, Universität Bielefeld 

Projektkurse als Bestandteil der neuen gymnasialen Oberstufe in NRW – Grundsätzliche Überlegungen und sportbezogene Besonderheiten
Wagner, I.
2008. Deutsche Sporthochschule Köln (dshs) 

Wie haben sich die Leistungsüberprüfungen entwickelt? – Tendenzen bei Klausuren, Facharbeiten, Fachprüfungen und Abiturprüfungen
Schulz, N.; Wagner, I.
2008. Erprobungsvorhaben „Sport als 4. Fach der Abiturprüfurng“ (2. Phase: 2006-2008), Abschlussbericht. Hrsg.: D. Kurz, 10–27 

Statistical process and measurement control for micro production
Lanza, G.; Fleischer, J.; Schlipf, M.
2008. Microsystem Technologies, 14 (9-11), 1227–1232. doi:10.1007/s00542-007-0508-9 

Genaues Positionieren gekrümmter Profile‐Ein Ansatz zur Genauigkeitssteigerung bei der flexiblen Bearbeitung gekrümmter Rohrprofile
Lanza, G.; Fleischer, J.; Ruch, D.
2008. wt Werkstattstechnik online, 98 (5), 357–362 

High performance cutting - micromachining : proceedings of the 3rd International CIRP High Performance Cutting Conference ; 3rd CIRP HPC 2008 ; 12th and 13th of June, 2008, Dublin, Ireland
Byrne, G.; OʾDonnell, G. (Eds.)
2008. University College Dublin 

Convection-allowing simulations of cold pools in the northwestern
Trentmann, J.; Knippertz, P.; Seifert, A.
2008. COSMO User Seminar (2008), Langen, Germany, March 3–4, 2008 

An objective climatology of Tropical Plumes
Hohberger, E.; Fröhlich, L.; Knippertz, P.
2008. 5th vEGU21: European Geosciences Union General Assembly (EGU 2008), Vienna, Austria, April 13–18, 2008 

Tropical-extratropical interactions related to upper-level troughs at low latitudes
Fröhlich, L.; Knippertz, P.
2008. 5th vEGU21: European Geosciences Union General Assembly (EGU 2008), Vienna, Austria, April 13–18, 2008 

Dynamics and predictability of heavy precipitation events over West Africa – sensitivity experiments with the global model GME
Meier, F.; Knippertz, P.
2008. 5th vEGU21: European Geosciences Union General Assembly (EGU 2008), Vienna, Austria, April 13–18, 2008 

Dust mobilization and transport in the northern Sahara during SAMUM 2006
Knippertz, P.; Ansmann, A.; Althausen, D.; Müller, D.; Tesche, M.; Bierwirth, E.; Dinter, T.; Müller, T.; Hoyningen-Huene, W. von; Schepanski, K.; Wendisch, M.; Heinold, B.; Kandler, K.; Petzold, A.; Schütz, L.; Tegen, I.
2008. 5th vEGU21: European Geosciences Union General Assembly (EGU 2008), Vienna, Austria, April 13–18, 2008 

The development of potential vorticity intrusions over the tropical North Atlantic
Knippertz, P.; Fröhlich, L.; Meier, F.
2008. 5th vEGU21: European Geosciences Union General Assembly (EGU 2008), Vienna, Austria, April 13–18, 2008 

A Lagrangian climatology of Moisture Conveyor Belts that link tropical moisture sources and precipitation in the extratropical Northern Hemisphere
Knippertz, P.; Wernli, H.
2008. 5th vEGU21: European Geosciences Union General Assembly (EGU 2008), Vienna, Austria, April 13–18, 2008 

Forecast quality of West African dry-season rainfall events in ECMWF operational and reanalysis data
Knippertz, P.; Fink, A. H.
2008. 5th vEGU21: European Geosciences Union General Assembly (EGU 2008), Vienna, Austria, April 13–18, 2008 

A newly identified mechanism for dust emissions over the Sahel associated with the West African Monsoon intertropical discontinuity region
Bou Karam, D.; Flamant, C.; Knippertz, P.; Reitebuch, O.; Pelon, J.; Chong, M.; Dabas, A.
2008. 5th vEGU21: European Geosciences Union General Assembly (EGU 2008), Vienna, Austria, April 13–18, 2008 

Rainfall and dust event over the Ahaggar massif, Algeria, caused by a northward burst of the West African Monsoon: a case study from the African Monsoon Multidisciplinary Analysis Special Operation Period
Cuesta, J.; Lavaysse, C.; Flamant, C.; Mimouni, M.; Knippertz, P.
2008. 5th vEGU21: European Geosciences Union General Assembly (EGU 2008), Vienna, Austria, April 13–18, 2008 

Rainfall events during the West African dry-season: Forcing from the extratropics and predictability
Knippertz, P.; Fink, A. H.
2008. 28th Conference on Hurricanes and Tropical Meteorology (2008), Orlando, FL, USA, April 27–May 2, 2008 

A newly identified mechanism for dust emissions over the Sahel associated with the West African Monsoon inter-tropical discontinuity
Bou Karam, D.; Flamant, C.; Knippertz, P.; Reitebuch, O.; Pelon, J.; Chong, M.; Dabas, A.
2008. International Laser Radar Conference (ILRC 2008), Boulder, CO, USA, July 23–27, 2008 

Density currents in the Sahara – Sensitivity to evaporation
Trentmann, J.; Knippertz, P.; Seifert, A.
2008. 15th International Conference on Clouds and Precipitation (2008), Cancún, Mexico, July 7–11, 2008 

The climate perspective of tropical and northern Africa
Paeth, H.; Fink, A.; Christoph, M.; Born, K.; Krüger, A.; Diederich, M.; Brücher, T.; Heuer, K. O.; Piecha, C.; Ermert, V.; Knippertz, P.; Schulz, O.; Speth, P.; Kerschgens, M.; Simmer, C.
2008. Global Change and Water Resources in West Africa – The German-African GLOWA Projects (2008), Ouagadougou, Burkina Faso, August 25–28, 2008 

Mixed mineral, biomass burning and marine aerosols of the Cape Verde Islands region - Size distributions and mass concentrations during SAMUM-II
Schütz, L.; Kandler, K.; Deutscher, C.; Knippertz, P.; Ebert, M.; Lieke, K.; Müller-Ebert, D.; Weinbruch, S.; Nowak, A.; Schladitz, A.
2008. European Aerosol Conference (EAC 2008), Thessaloniki, Greece, August 24–29, 2008 

Upper-level disturbances over the low-latitude North Atlantic in operational ECMWF-EPS: Forecast quality, predictability and dynamics
Wiegand, L.; Knippertz, P.
2008. 7th International NCCR Climate Summer School (2008), Monte Verità, Ticino, Switzerland, August 31–September 5, 2008 

Boundary layer aerosol size distributions during SAMUM I-II
Schütz, L.; Kandler, K.; Deutscher, C.; Lieke, K.; Maßling, A.; Nowak, A.; Schladitz, A.; Ebert, M.; Lieke, K.; Weinbruch, S.; Knippertz, P.; Jaenicke, R.
2008. 3rd International Workshop on Mineral Dust (2008), Leipzig, Germany, September 15–17, 2008 

Single particle chemical and mineralogical composition and derived optical parameters of the aerosol at and over Tinfou, Morocco, during SAMUM 2006
Kandler, K.; Schütz, L.; Deutscher, C.; Knippertz, P.; Lieke, K.; Weinzierl, B.; Zorn, S.; Ebert, M.; Jaenicke, R.; Petzold, A.; Weinbruch, S.
2008. 3rd International Workshop on Mineral Dust (2008), Leipzig, Germany, September 15–17, 2008 

Vertical profiling of convective dust plumes in southern Morocco during SAMUM
Ansmann, A.; Tesche, M.; Althausen, D.; Müller, D.; Knippertz, P.; Bierwirth, E.
2008. 3rd International Workshop on Mineral Dust (2008), Leipzig, Germany, September 15–17, 2008 

A climatology of evaporation-driven density currents in the southern foothills of the High Atlas in southern Morocco
Deutscher, C.; Knippertz, P.; Schulz, O.
2008. 3rd International Workshop on Mineral Dust (2008), Leipzig, Germany, September 15–17, 2008 

Dust mobilization and transport in the northern Sahara during SAMUM 2006
Knippertz, P.; Ansmann, A.; Althausen, D.; Müller, D.; Tesche, M.; Bierwirth, E.; Dinter, T.; Müller, T.; Hoyningen-Huene, W. von; Schepanski, K.; Wendisch, M.; Heinold, B.; Kandler, K.; Petzold, A.; Schütz, L.; Tegen, I.
2008. 3rd International Workshop on Mineral Dust (2008), Leipzig, Germany, September 15–17, 2008 

Dust and hurricanes linkages
Knippertz, P.
2008. 3rd International Workshop on Mineral Dust (2008), Leipzig, Germany, September 15–17, 2008 

The development of potential vorticity intrusions over the tropical North Atlantic
Knippertz, P.; Fröhlich, L.; Meier, F.
2008. Cyclone Workshop (2008), Val-Morin, Canada, September 21–26, 2008 

Climatologie de courant de densité produit par évaporation dans les pré-montagnes du Haut Atlas dans le sud du Maroc
Deutscher, C.; Knippertz, P.; Schulz, O.
2008. Conférence du projet IMPETUS (2008), Ouarzazate, Morocco, October 28–30, 2008 

Quantitative analysis and optimization of the effectiveness of lean methods in small batch production
Lanza, G.; Peter, K.; Broos, A.
2008. 5th Optimization and Stochastic Days 2008, 20th - 21st November, Weimar, 1–9, Dynardo GmbH 

Manufacturing systems and technologies for the new frontier : the 41st CIRP Conference on Manufacturing Systems, May 26 - 28, 2008, Tokyo, Japan
Mitsuishi, M.; Ueda, K.; Kimura, F. (Eds.)
2008. Springer 

Effektive Auswahl und Qualifizierung eines chinesischen Lieferanten
Lanza, G.; Weiler, S.
2008. VDMA-Nachrichten, 1–34 

Conception of a Methodology for a Comprehensive Procurement Market Selection for Low-Cost Country Sourcing
Lanza, G.; Weiler, S.
2008. Y. Shi, J. Srai & M. Gregory (Eds.), Global value chains - capturing value in international manufacturing and supply networks : the 13th Annual International Manufacturing Symposium , 25th - 26th September 2008, Cambridge ; symposium proceedings (2008). Hrsg.: Shi, Yongjiang; Srai, Jag; Gregory, Mike, 1–23, University of Cambridge, Institute for Manufacturing 

Challenges and user support in micro coordinate metrology
Lanza, G.; Peters, J.
2008. 1st International F25 User Meeting 

Quality assurance for micro manufacturing processes and primary-shaped micro components
Lanza, G.; Schlipf, M.; Fleischer, J.
2008. Microsystem Technologies, 14 (12), 1823–1830. doi:10.1007/s00542-008-0608-1 

Discriminative Word Alignment via Alignment Matrix Modeling
Niehues, J.; Vogel, S.
2008. Proceedings of the Third Workshop on Statistical Machine Translation. Ed. C. Callison-Burch, 18–25, Association for Computational Linguistics (ACL) 

Simultaneous German-English lecture translation
Kolss, M.; Wölfel, M.; Kraft, F.; Niehues, J.; Paulik, M.; Waibel, A.
2008. Proceedings of the Fifth International Workshop on Spoken Language Translation (IWSLT 2008), 174–181 

Simultaneous Machine Translation of German lectures into English: Investigating research challenges for the future
Wölfel, M.; Kolss, M.; Kraft, F.; Niehues, J.; Paulik, M.; Waibel, A.
2008. IEEE Spoken Language Technology Workshop, 2008 : SLT 2008 ; 15 - 19 Dec. 2008, Holiday Inn Goa, Goa, India, 233–236, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/SLT.2008.4777883 

Prediction of Functionality and Long-term Performance of Microgears
Albers, A.; Lanza, G.; Fleischer, J.; Deigendesch, T.; Enkler, H. G.; Leslabay, P.; Oerding, J.; Viering, B.; Schlipf, M.
2008. Proceedings of the 10th anniversary international conference of the European Society for Precision Engineering and Nanotechnology : May 18th - May 22nd 2008, Zürich, Switzerland. Ed.: H. Van Brussel, 270–274, European Society for Precision Engineering and Nanotechnology (euspen) 

Model based Control of Surface Quality with regard to Micro Cutting Processes
Fleischer, J.; Lanza, G.; Kotschenreuther, J.; Deuchert, M.; Schlipf, M.; Smiljkovic, S.
2008. G. Byrne & G. OʾDonnell (Eds.), 3rd International Conference High Performance Cutting (HPC) : Dublin, Ireland, June 12 - 13th, 2008. Chairmen: Gerry Byrne, 775–784, University College Dublin 

Statistical quality control in micro-manufacturing through multivariate μ-EWMA chart
Fleischer, J.; Lanza, G.; Schlipf, M.
2008. CIRP Annals-Manufacturing Technology, 57 (1), 521–524. doi:10.1016/j.cirp.2008.03.113 

Application of statistical resampling techniques on CMM point clouds
Fleischer, J.; Lanza, G.; Peters, J.; Viering, B.
2008. H. Brussel (Ed.), 10th Anniversary International Conference of the European Society for Precision Engineering and Nanotechnology (EUSPEN) 2008. Hrsg.: Hendrik Brussel, 280–284, European Society for Precision Engineering and Nanotechnology (euspen) 

Quantified interdependencies between lean methods and production figures in the small series production
Fleischer, J.; Lanza, G.; Peter, K.
2008. M. Mitsuishi, K. Ueda & F. Kimura (Eds.), Manufacturing Systems and Technologies for the New Frontier. Ed.: Mitsuishi, Mamoru; Ueda, Kanji; Kimura, Fumihiko, 89–92, Springer. doi:10.1007/978-1-84800-267-8_17 

Global grid user support—building a worldwide distributed user support infrastructure
Antoni, T.; Bühler, W.; Dres, H.; Grein, G.; Roth, M.
2008. Journal of Physics: Conference Series, 119 (5), Artk.Nr.: 052002. doi:10.1088/1742-6596/119/5/052002 

Measurements with the KATRIN pre-spectrometer
Habermehl, F.; Collaboration, the K. A. T. R. I. N.
2008. Journal of Physics: Conference Series, 120 (5), Artk.Nr.: 052031. doi:10.1088/1742-6596/120/5/052031 

A Journey from the Needle in the Haystack to solving Global Water Needs: Issues in Urban and Rural Water Management
Schäfer, A. I.
2008. ETH Symposium (2008), Zurich, Switzerland, July 3, 2008 

Fluid inclusions in speleothems as a new archive for the noble gas palaeothermometer. PhD dissertation
Kluge, T.
2008. Universität Heidelberg. doi:10.11588/heidok.00008797 

Paleotemperature reconstruction using noble gas concentrations in speleothem fluid inclusions
Scheidegger, Y.; Kluge, T.; Kipfer, R.; Aeschbach-Hertig, W.; Wieler, R.
2008. Past global changes magazine, 16 (3), 10–12. doi:10.22498/pages.16.3.10  

A new tool for palaeoclimate reconstruction: Noble gas temperatures from fluid inclusions in speleothems
Kluge, T.; Marx, T.; Scholz, D.; Niggemann, S.; Mangini, A.; Aeschbach-Hertig, W.
2008. Earth and planetary science letters, 269 (3-4), 408–415. doi:10.1016/j.epsl.2008.02.030 

Focussing an X-ray energy range using a compound of refractive elements
Umbach, M.; Nazmov, V.; Reznikova, E.; Simon, M.; Last, A.; Saile, V.
2008. SPIE Europe Optical Systems Design 2008: 

Three-dimensional chiral photonic crystals by direct laser writing
Thiel, M.; Wegener, M.; Freymann, G. von
2008. T. J. Suleski, W. V. Schoenfeld & J. J. Wang (Eds.), Advanced Fabrication Technologies for Micro/Nano Optics and Photonics: MOEMS-MEMS 2008 Micro and Nanofabrication, 19-24 January 2008, San Jose, California, United States. Ed.: T. J. Suleski, SPIE. doi:10.1117/12.762575