Influence of Thermal Cycling on the Mechanical Properties of Al/Diamond Composites
Weidenmann, K. A.; Tavangar, R.; Weber, L.
2011. Tagungsband zum 18. Symposium Verbundwerkstoffe und Werkstoffverbunde - Chemnitz, 30.03. bis 01.04.2011. Hrsg.: B. Wielage, 40–45, TU Chemnitz 

Charakterisierung des Verformungs- und Schädigungsverhaltens unidirektional drahtverstärkter Aluminium- und Magnesiummatrixverbunde unter Zug- und Druckbeanspruchung
Merzkirch, M.; Reeb, A.; Weidenmann, K. A.; Schulze, V.
2011. Tagungsband zum 18. Symposium Verbundwerkstoffe und Werkstoffverbunde, Chemnitz, 30.03. bis 01.04.2011. Hrsg.: B. Wielage, 103–108, TU Chemnitz 

Open source procedure for assessment of loss using global earthquake modelling software (OPAL)
Daniell, J. E.
2011. Natural hazards and earth system sciences, 11 (7), 1885–1899. doi:10.5194/nhess-11-1885-2011  

Urbane Seismologie am Beispiel der aktuellen seismischen Ereignisse unter Landau, Südpfalz
Ritter, J. R. R.
2011. 12. D-A-CH Tagung ’Erdbeben und Baudynamik’, Hannover, 15.-16. September 2011. Hrsg.: C. Könke, 113–119, Deutsche Gesellschaft für Erdbeben-Ingenieurwesen und Baudynamik 

Konzeptionelle Ansätze zur Überwachung induzierter Seismizität im Oberrheingraben, Rheinland-Pfalz
Ritter, J. R. R.
2011. Mainzer geowissenschaftliche Mitteilungen, 39, 157–176. doi:10.23689/fidgeo-5741 

Geological and geophysical model of the Quaternary layers based on in situ measurements in Bucharest
Bala, A.; Hannich, D.; Ritter, J. R. R.; Ciugudean-Toma, V.
2011. Romanian Reports in Physics, 63 (1), 250–274 

Teleseismic wave front field anomalies at a continental rift: no mantle anomaly below the Central Upper Rhine Graben
Kirschner, S.; Ritter, J. R. R.; Wawerzinek, B.
2011. Geophysical Journal International, 186 (2), 447–461. doi:10.1111/j.1365-246X.2011.05071.x 

Resilliency Indicators for Mainstreaming Disaster Risk Reduction in the City of Mumbai
Khazai, B.; Bendimerad, F.; Wenzel, F.
2011. European Geosciences Union General Assembly, Vienna, Austria, April 3-8, 2011 

Emergency Shelter Provision in the aftermath of Earthquakes: Integrating Social Vulnerability in Systemic Seismic Vulnerability Analysis
Khazai, B.; Vangelsten, B.; Duzgun, S.; Braun, J.; Daniell, J.
2011. Geophysical research abstracts, 13, 7374 

Imaging in complex structures by post-stack time migration and CRS stack
Soleimani Monfared, M.; Adibi, E.; Mann, J.
2011. 12th International Congress of the Brazilian Geophysical Society, Rio de Janeiro, Brazil, August 15-18, 2011, 1 CD-Rom, Sociedade Brasileira de Geofisica 

A model-based approach to the Common-Diffraction-Surface Stack - a synthetic case study
Shahsavani, H.; Mann, J.; Piruz, I.; Hubral, P.
2011. 12th International Congress of the Brazilian Geophysical Society, Rio de Janeiro, Brazil, August 15-18, 2011, 1 CD-Rom, Sociedade Brasileira de Geofisica 

2D acoustic Full Waveform Tomography of marine streamer data: data preparation and choice of inversion strategies
Przebindowska, A.; Kurzmann, A.; Köhn, D.; Bohlen, T.
2011. 12th International Congress of the Brazilian Geophysical Society, Rio de Janeiro, Brazil, August 15-18, 2011, 1 CD-Rom, Sociedade Brasileira de Geofisica 

A model-based approach to the Common-Diffraction-Surface Stack
Shahsavani, H.; Mann, J.; Piruz, I.; P. Hubral
2011. 73rd European Association of Geoscientists and Engineers conference and exhibition 2011, Vienna, Austria, May 23 - 26, 2011; Vol. 6, 4204–4208, Curran 

2D acoustic full waveform tomography of marine streamer data - Problems and data preprocessing
Przebindowska, A.; Kurzmann, A.; Köhn, D.; Bohlen, T.
2011. 73rd European Association of Geoscientists and Engineers conference and exhibition 2011, Vienna, Austria, May 23 - 26, 2011; Vol. 5, 3996–4000, Curran. doi:10.3997/2214-4609.20149385 

A model-based approach to the Common-Diffraction-Surface stack - theory and synthetic case study
Shahsavani, H.; Mann, J.; Piruz, I.; Hubral, P.
2011. Journal of Seismic Exploration, 20 (3), 289–308 

Complete determination of elastic moduli of interpenetrating metal/ceramic composites using ultrasonic techniques and micromechanical modelling
Roy, S.; Gebert, J.-M.; Stasiuk, G.; Piat, R.; Weidenmann, K. A.; Wanner, A.
2011. Materials Science and Engineering: A, 528 (28), 8226–8235. doi:10.1016/j.msea.2011.07.029 

Minimal compliance design for metal-ceramic composites based structures
Piat, R.; Sinchuk, Y.; Vasoya, M.; Sigmund, O.
2011. Acta Materialia, 59 (12), 4835–4846. doi:10.1016/j.actamat.2011.04.026 

Micromechanical Modeling of Metal Forming Operations
Phan Van, T.; Jöchen, K.; Böhlke, T.
2011. ESAFORM 2011: Proceedings of the 14th International Conference on Material Forming, Belfast, April 27 - 29, 2011. Ed.: G. Menary, 1215–1219, American Institute of Physics (AIP). doi:10.1063/1.3589682 

Preprocessing of Texture Data for an Efficient Use in Homogenization Schemes
Jöchen, K.; Böhlke, T.
2011. Proceedings of the 10th International Conference on Technology of Plasticity (ICTP 2011), Aachen, Germany, September 25 - 30, 2011. Ed.: G. Hirt, 848–853, Verl. Stahleisen GmbH 

Qualitative study on texture evolution in rolled sheet metals using homogenization methods
Jöchen, K.; Böhlke, T.
2011. ESAFORM 2011: Proceedings of the 14th International Conference on Material Forming, Belfast, April 27 - 29, 2011. Ed.: G. Menary, 139–144, American Institute of Physics (AIP). doi:10.1063/1.3589505 

Periodic three-dimensional mesh generation for particle reinforced composites with application to metal matrix composites
Fritzen, F.; Böhlke, T.
2011. International Journal of Solids and Structures, 48 (5), 706–718. doi:10.1016/j.ijsolstr.2010.11.010 

Nonuniform transformation field analysis of materials with morphological anisotropy
Fritzen, F.; Böhlke, T.
2011. Composites Science and Technology, 71 (4), 433–442. doi:10.1016/j.compscitech.2010.12.013 

Numerical modeling of carbon/carbon composites with nanotextured matrix and 3D pores of irregular shapes
Drach, B.; Tsukrov, I.; Gross, T.; Dietrich, S.; Weidenmann, K.; Piat, R.; Böhlke, T.
2011. International Journal of Solids and Structures, 48 (18), 2447–2457. doi:10.1016/j.ijsolstr.2011.04.021 

Dislocation Transport in Single Crystals and Dislocation-based Micromechanical Hardening
Wulfinghoff, S.; Glavas, V.; Böhlke, T.
2011. Proceedings in applied mathematics and mechanics, 11 (1), 449–450. doi:10.1002/pamm.201110216 

Delamination of Grain-Interfaces in Silicon Nitride
Wippler, J.; Böhlke, T.
2011. Proceedings in applied mathematics and mechanics, 11 (1), 183–184. doi:10.1002/pamm.201110083 

Inelastic behavior of the single domain of metal-ceramic composites with lamellar microstructure
Sinchuk, Y.; Piat, R.; Roy, S.; Gibmeier, J.; Wanner, A.
2011. Proceedings in applied mathematics and mechanics, 11 (1), 285–286. doi:10.1002/pamm.201110134 

Nonlinear homogenization of metal-ceramic composites with lamellar microstructure
Piat, R.; Sinchuk, Y.
2011. Proceedings in applied mathematics and mechanics, 11 (1), 545–546. doi:10.1002/pamm.201110262 

Validation of Material Models in Grain Scale Simulation based on EBSD Experimental Data
Van, T. P.; Jöchen, K.; Böhlke, T.
2011. Proceedings in applied mathematics and mechanics, 11 (1), 543–544. doi:10.1002/pamm.201110261 

Estimate of the Domain Orientation Distribution Function and the Thermoelastic Properties of Pyrolytic Carbon Based on an Image Processing Technique
Lin, S.; Böhlke, T.; Langhoff, T.-A.
2011. Proceedings in applied mathematics and mechanics, 11 (1), 537–538. doi:10.1002/pamm.201110258 

Nonlinear homogenization using the nonuniform transformation field analysis
Fritzen, F.; Böhlke, T.
2011. Proceedings in applied mathematics and mechanics, 11 (1), 519–522. doi:10.1002/pamm.201110250 

Material properties of anisotropic materials with pores
Drach, B.; Tsukrov, I.; Piat, R.; Dietrich, S.
2011. Proceedings in applied mathematics and mechanics, 11 (1), 507–508. doi:10.1002/pamm.201110245 

Influence of micro-structure on fibre push-out tests
Brylka, B.; Fritzen, F.; Bölhke, T.; Weidenmann, K. A.
2011. Proceedings in applied mathematics and mechanics, 11 (1), 141–142. doi:10.1002/pamm.201110062 

A Two Stage Approach for Balancing a Periodic Long-Haul Transportation Network
Meyer, A.; Cardeneo, A.; Furmans, K.
2011. Operations Research Proceedings 2010: Selected Papers of the Annual International Conference of the German Operations Research Society. Ed.: B. Hu, 257–262, Springer-Verlag. doi:10.1007/978-3-642-20009-0_41 

Wie sich kleine Transportmengen wirtschaftlich versenden lassen
Furmans, K.; Breier, H.; Weiblen, J.
2011. Logistik für Unternehmen, 25 (5), 32–33 

Können Läger schlank sein? Vom Lean Production über Lean Management zum Lean Warehousing
Dehdari, P.; Schwab, M.; Furmans, K.; Wlcek, H.
2011. Flexibel sicher nachhaltig: 28. Deutscher Logistik-Kongress, Berlin, 19. - 21. Oktober 2011. Hrsg.: T. Wimmer, 349–370, DVV Media Group 

Dezentrale, deadlockfreie Steuerung eines Stetigförderers
Schönung, F.; Mayer, S.; Berbig, D.
2011. at - Automatisierungstechnik, 59 (4), 226–233. doi:10.1524/auto.2011.0914 

Automatisierung in der Logistik - dezentral und geregelt
Furmans, K.; Overmeyer, L.
2011. Automatisierungstechnik, 59 (4), 207–209. doi:10.1524/auto.2011.9088 

Anticrack model for skier triggering of slab avalanches
Heierli, J.; Birkeland, K. W.; Simenhois, R.; Gumbsch, P.
2011. Cold Regions Science and Technology, 65 (3), 372–381. doi:10.1016/j.coldregions.2010.10.008 

Influence of surface condition on wear behavior of μPIM mould inserts made of tool steel and cemented carbide
Schneider, J.; Kienzler, A.; Schulze, V.
2011. Microsystem technologies, 17 (2), 273–280. doi:10.1007/s00542-011-1238-6 

Tribologische Charakterisierung von Sialon-SiC-Mischkeramiken im Hinblick auf den Einsatz in Kraftstoff geschmierten Gleitsystemen
Schneider, J.; Riva, M.; Hoffmann, M. J.
2011. Zeitschrift T+S: Tribologie und Schmierungstechnik, 58 (1), 22–26 

Aspect ratio and stochastic effects in the plasticity of uniformly loaded micrometer sized specimens
Senger, J.; Weygand, D.; Motz, C.; Gumbsch, P.; Kraft, O.
2011. Acta materialia, 59 (8), 2937–2947. doi:10.1016/j.actamat.2011.01.034 

Continuum modeling of dislocation plasticity: Theory, numerical implementation and validation by discrete dislocation simulations
Sandfeld, S.; Hochrainer, T.; Zaiser, M.; Gumbsch, P.
2011. Journal of Materials Research, 26 (5), 623–632. doi:10.1557/jmr.2010.92 

Influence of orientation on the size effect in bcc pillars with different critical temperatures
Schneider, A. S.; Clark, B. G.; Frick, C. P.; Gruber, P. A.; Arzt, E.
2011. Materials science and engineering / A, 528 (3), 1540–1547. doi:10.1016/j.msea.2010.10.073 

Impact of gamma’ particles coarsening on the critical resolved shear stress of nickel-base superalloys with low aluminium and/or titanium content
Ispanovity, P.; Bako, B.; Weygand, D.; Hoffelner, W.; Samaras, M.
2011. Journal of Nuclear Materials, 416 (1-2), 55–59. doi:10.1016/j.jnucmat.2010.11.051 

Wear and corrosion of silicon nitride rolling tools in copper rolling
Khader, I.; Hashibon, A.; Albina, J.-M.; Kailer, A.
2011. Wear, 271 (9-10), 2531–2541. doi:10.1016/j.wear.2010.12.071 

Continuum modeling of dislocation plasticity: Theory, numerical implementation and comparison to discrete dislocation simulations
Gumbsch, P.; Sandfeld, S.; Senger, J.; Weygand, D.; Hochrainer, T.
2011. Advances in Heterogeneous Material Mechanics 2011: Proceedings of the Third International Conference on Heterogeneous Material Mechanics, Shanghai, China, May 22-26, 2011. Ed.: J. Fan, 7–15, DEStech Publications 

Dislocation microstructure evolution in cyclically twisted microsamples : a discrete dislocation dynamics simulation
Senger, J.; Weygand, D.; Kraft, O.; Gumbsch, P.
2011. Modelling and simulation in materials science and engineering, 19 (7), Art.Nr. 074004. doi:10.1088/0965-0393/19/7/074004 

Towards Frank-Read Sources in the Continuum Dislocation Dynamics Theory
Sandfeld, S.; Hochrainer, T.
2011. Numerical analysis and applied mathematics: International Conference on Numerical Analysis and Applied Mathematics (ICNAAM 2011), Halkidiki, Greece, September 19-25, 2011. Ed.: T. E. Simos, 1531–1534, American Institute of Physics (AIP) 

Dislocation-vacancy interactions in tungsten
Chen, Z.; Mrovec, M.; Gumbsch, P.
2011. Modelling and Simulation in Materials Science and Engineering, 19 (7), 074002/1–14. doi:10.1088/0965-0393/19/7/074002 

Formation and Oxidation of Linear Carbon Chains and Their Role in the Wear of Carbon Materials
Moras, G.; Pastewka, L.; Gumbsch, P.; Moseler, M.
2011. Tribology Letters, 44 (3), 355–365. doi:10.1007/s11249-011-9864-9 

In situ observation of wear particle formation on lubricated sliding surfaces
Korres, S.; Feser, T.; Dienwiebel, M.
2011. Acta Materialia, 60 (1), 420–429. doi:10.1016/j.actamat.2011.09.046 

Progressive Shortening of sp-Hybridized Carbon Chains through Oxygen-Induced Cleavage
Moras, G.; Pastewka, L.; Walter, M.; Schnagl, J.; Gumbsch, P.; Moseler, M.
2011. Journal of Physical Chemistry C, 115, 24653–24661. doi:10.1021/jp209198g 

Enhanced tribological performance of silicon nitride-based materials by adding carbon nanotubes
Gonzalez-Julian, J.; Schneider, J.; Miranzo, P.; Osendi, M. I.; Belmonte, M.
2011. Journal of the American Ceramic Society, 94 (8), 2542–2548. doi:10.1111/j.1551-2916.2011.04391.x 

The effect of a homogenizing optic on residual stresses and shear strength of laser brazed ceramic/steel-joints
Südmeyer, I.; Besser, H.; Grein, M.; Liesching, B.; Rohde, M.; Schneider, J.
2011. Laser-based micro- and nanopackaging and assembly V, San Francisco, California, United States, 25 - 27 January 2011. Ed.: W. Pfleging, 792108/1–8, Society of Photo-optical Instrumentation Engineers (SPIE) 

Geometrische und mikrostrukturelle Skaleneffekte im ungeschmierten, einsinnigen Gleitkontakt von keramischen Werkstoffpaarungen
Polzer, T.; Zum Gahr, K.-H.; Schneider, J.
2011. Reibung, Schmierung und Verschleiß: Forschung und praktische Anwendungen. 52. Tribologie-Fachtagung, Göttingen, 26. bis 28. September 2011, 8/1–11, Gesellschaft für Tribologie e.V. (GfT) 

Mechanisms of toughening in silicon nitrides: The roles of crack bridging and microstructure
Fünfschilling, S.; Fett, T.; Hoffmann, M. J.; Oberacker, R.; Schwind, T.; Wippler, J.; Böhlke, T.; Özcoban, H.; Schneider, G. A.; Becher, P. F.; Kruzic, J. J.
2011. Acta Materialia, 59 (10), 3978–3989. doi:10.1016/j.actamat.2011.03.023 

Crack-Tip Toughness from Vickers Crack-Tip Opening Displacements for Materials with Strongly Rising R-Curves
Fünfschilling, S.; Fett, T.; Oberacker, R.; Hoffmann, M. J.; Schneider, G. A.; Becher, P.; Krusic, J. J.
2011. Journal of the American Ceramic Society, 94 (6), 1884–1892. doi:10.1111/j.1551-2916.2010.04329.x 

Investigation of structure formation during freeze-casting from very slow to very fast solidification velocities
Waschkies, T.; Oberacker, R.; Hoffmann, M. J.
2011. Acta Materialia, 59 (13), 5135–5145. doi:10.1016/j.actamat.2011.04.046 

Effect of Water Penetration on the Strength and Toughness of Silica Glass
Wiederhorn, S. M.; Fett, T.; Rizzi, G.; Funfschilling, S.; Hoffmann, M. J.; Guin, J.-P.
2011. Journal of the American Ceramic Society, 94 (S1), s196-s203. doi:10.1111/j.1551-2916.2011.04530.x 

Effects of poling over the orthorhombic-tetragonal phase transition temperature in compositionally homogeneous (K,Na)NbO3-based ceramics
Morozov, M. I.; Kungl, H.; Hoffmann, M. J.
2011. Applied Physics Letters, 98 (13), 132908/1–3. doi:10.1063/1.3573790 

In situ neutron diffraction study of electric field induced structural transitions in lanthanum doped lead zirconate titanate
Hinterstein, M.; Hoelzel, M.; Kungl, H.; Hoffmann, M. J.; Ehrenberg, H.; Fuess, H.
2011. Zeitschrift für Kristallographie - Crystalline Materials, 226 (2), 155–162. doi:10.1524/zkri.2011.1338 

Electric Field-Assisted Sintering in Comparison with the Hot Pressing of Yttria-Stabilized Zirconia
Langer, J.; Hoffmann, M. J.; Guillon, O.
2011. Journal of the American Ceramic Society, 94 (1), 24–31. doi:10.1111/j.1551-2916.2010.04016.x 

CuO-doped NaNbO3 antiferroelectrics: Impact of aliovalent doping and nonstoichiometry on the defect structure and formation of secondary phases
Erunal, E.; Jakes, P.; Korbel, S.; Acker, J.; Kungl, H.; Elsasser, C.; Hoffmann, M. J.; Eichel, R. A.
2011. Physical Review B, 84 (18), 184113/1–11. doi:10.1103/PhysRevB.84.184113 

Preparation of Optically Transparent Open-Celled Foams and its Morphological Characterization Employing Volume Image Analysis
Bucharsky, E. C.; Schell, K. G.; Habisreuther, P.; Oberacker, R.; Zarzalis, N.; Hoffmann, M. J.
2011. Advanced Engineering Materials, 13 (11), 1060–1065. doi:10.1002/adem.201100024 

Interaction of Modified (K,Na)NbO3 Ceramics with Ag-Containing Electrodes
Morozov, M. I.; Bäurer, M.; Hoffmann, M. J.
2011. Journal of the American Ceramic Society, 94 (10), 3591–3595. doi:10.1111/j.1551-2916.2011.04607.x 

Homogenization of the thermoelastic properties of silicon nitride
Wippler, J.; Fünfschilling, S.; Fritzen, F.; Bohlke, T.; Hoffmann, M. J.
2011. Acta Materialia, 59 (15), 6029–6038. doi:10.1016/j.actamat.2011.06.011 

Sinter-HIP of polymer-derived Al2O3-SiC composites with high SiC contents
Sedlacek, J.; Galusek, D.; Riedel, R.; Hoffmann, M. J.
2011. Materials Letters, 65 (15-16), 2462–2465. doi:10.1016/j.matlet.2011.04.094 

An Overview of the Structure and Properties of Silicon-Based Oxynitride Glasses
Becher, P. F.; Hampshire, S.; Pomeroy, M. J.; Hoffmann, M. J.; Lance, M. J.; Satet, R. L.
2011. International Journal of Applied Glass Science, 2 (1), 63–83. doi:10.1111/j.2041-1294.2011.00042.x 

Aeroakustische Messungen an Axialventilatoren zur Motorkühlung
Zayani, M.; Caglar, S.; Gabi, M.
2011. Fortschritte der Akustik: 37. Jahrestagung für Akustik (DAGA 2011), Düsseldorf, 21. - 24. März 2011. Ed.: J. Becker-Schweitzer, 1 CD-Rom, Deutsche Gesellschaft für Akustik (DEGA) 

Investigations on the Flow Field in an Unshrounded Pump Impeller Geometry
Sieber, S.; Fröhlig, F.; Caglar, S.; Gabi, M.
2011. Proceedings of the 10th International Symposium on Experimental Computational Aerothermodynamics of Internal Flows, 4-7 July 2011, Brussels, Belgium, 1 CD-Rom, ISAIF 

Modeling and Transient Analysis of a Novel Adsorption Cycle Concept for Solar Cooling
Schwamberger, V.; Glück, C.; Schmidt, F. P.
2011. Rapid transition to a renewable energy world: Proceedings of the ISES Solar World Congress 2011, Kassel, Germany, August 28 - Sepember 2, 2011, 1 DVD, International Solar Energy Society 

Photogrammetrische Rekonstruktion von Partikelpositionen mittels Rückprojektion für 3D-PIV
Kallweit, S.; Korculanin, O.; Fröhlig, F.; Gabi, M.; Mattern, P.
2011. Lasermethoden in der Strömungsmesstechnik: 19. Fachtagung, Ilmenau, 6.-8. September 2011. Hrsg.: A. Thess, 28, GALA 

Modeling Results of a Novel Adsorption Cycle with Advanced Heat Recovery for High-Efficiency Air-Cooled Adsorption Chillers
Schwamberger, V.; Schnabel, L.; Glück, C.; Schmidt, F. P.
2011. Solar air-conditioning: 4th international conference, Larnaka, Cyprus, October 12-14, 2011, 220–225, Ostbayerisches Technologie-Transfer-Institut 

Neuartiges Zyklenkonzept mit verbesserter interner Wärmerückgewinnung für Adsorptionskältemaschinen
Schwamberger, V.; Glück, C.; Schmidt, F. P.
2011. Deutsche Kälte-Klima-Tagung 2011: Kurzfassungen, Aachen, 16.-18. November 2011, 27, Dt. Kälte- und Klimatechnischer e.V 

Nachweisliche Förderung von Sozialkompetenz
Gidion, G.
2011. Kompetenzdiagnostik in der beruflichen Bildung - Probleme und Perspektiven. Hrsg.: M. Fischer, 129–141, Peter Lang International Academic Publishers 

Aus der Facharbeit in die Führungsposition. Evaluation der handlungsorientierten Fortbildung im industriellen Metallbereich - der "neue" Industriemeister in seiner betrieblichen Praxis; zusammenfassender Abschlussbericht
Gidion, G.; Sandal, C.
2011. Bundesinstitut für Berufsbildung 

Monocular Visual Odometry using a Planar Road Model to Solve Scale Ambiguity
Kitt, B.; Rehder, J.; Chambers, A.; Schönbein, M.; Lategahn, H.; Singh, S.
2011. Proceedings of the 5th European Conference on Mobile Robots (ECMR 2011), Örebro, Sweden, September 7-9, 2011. Ed.: A. J. Lilienthal, 43–48, Örebro University 

Optimal Elastic Design of CFCs
Stasiuk, G.; Piat, R.; Sinchuk, Y.
2011. Key Engineering Materials (KEM), 488-489, 295–298. doi:10.4028/www.scientific.net/KEM.488-489.295 

Formation of Frequency Pass and Gap Bands in an Elastic Waveguide with a System of Obstacles
Glushkov, E. V.; Glushkova, N. V.; Wauer, J.
2011. Acoustical Physics, 57 (3), 281–291. doi:10.1134/S1063771011010052 

Wave propagation in an elastically supported string with point-wise defects: gap-band and pass-band effects
Glushkov, E.; Glushkova, N.; Wauer, J.
2011. ZAMM - Zeitschrift für Angewandte Mathematik und Mechanik, 91 (1), 4–22. doi:10.1002/zamm.201000039 

Simulation of friction phenomena between randomly rough elastic surfaces
Gaus, N.; Proppe, C.
2011. Proceedings in applied mathematics and mechanics, 11 (1), 313–314. doi:10.1002/pamm.201110148 

Analytical investigations on vertical dynamics and tire forces of road vehicles with nonlinear suspensions
Vogt, H.; Hetzler, H.; Seemann, W.
2011. Proceedings of the 7th European Nonlinear Dynamics Conference (ENOC 2011), Rome, Italy, July 24-29, 2011. Ed.: D. Bernardini, 2 S., Sapienza Università di Roma 

On the influence of design parameters and nonlinearities in vehicle suspensions on road deformation
Vogt, H.; Hetzler, H.; Seemann, W.
2011. Proceedings in applied mathematics and mechanics, 11 (1), 343–344. doi:10.1002/pamm.201110163 

Jumping and hopping motion on sports surfaces - Energetic aspects vs. risk of injury
Körner, C.; Seemann, W.
2011. Proceedings in applied mathematics and mechanics, 11 (1), 325–326. doi:10.1002/pamm.201110154 

Nonlinear vibrational behaviour of an elasto-pneumatic training tool
Körner, C.; Hetzler, H.; Seemann, W.
2011. Vibration Problems ICOVP 2011: The 10th International Conference on Vibration Problems. Ed.: J. Naprstek, 673–680, Springer Netherlands. doi:10.1007/978-94-007-2069-5_90 

Simulation of friction between random elastic surfaces
Gaus, N.; Proppe, C.
2011. Proceedings of the 7th European Nonlinear Dynamics Conference (ENOC 2011), Rome, Italy, July 24-29, 2011. Ed.: D. Bernardini, 6 S., Sapienza Università di Roma 

On stability and self-excited vibrations in fluid-structure-interaction
Bach, K.; Hetzler, H.; Seemann, W.
2011. Proceedings in applied mathematics and mechanics, 11 (1), 309–310. doi:10.1002/pamm.201110146 

Analysis of a Compliant Mechanism for Positioning in the cm-Range
Kern, D.; Seemann, W.
2011. Proceedings in applied mathematics and mechanics, 11 (1), 235–236. doi:10.1002/pamm.201110109 

Dynamic stability of a steady flow in a planar channel
Bach, K.; Hetzler, H.; Seemann, W.
2011. Vibration Problems ICOVP 2011: The 10th International Conference on Vibration Problems. Ed.: J. Naprstek, 773–778, Springer Netherlands. doi:10.1007/978-94-007-2069-5_104 

SimPaGe - a powerful tool to simulate clutch and gearbox dynamics in manual and dual clutch transmissions
Fidlin, A.; Burkovski, L.; Stamm, W.
2011. Getriebe in Fahrzeugen 2011: Effizienzsteigerung im Antrieb, Friedrichshafen, June 7-8, 2011 = Transmissions in vehicles 2011, 143–159, VDI Verlag 

On the wobbling of friction discs
Drozdetskaya, O.; Fidlin, A.; Waltersberger, B.
2011. Proceedings of the 7th European Nonlinear Dynamics Conference (ENOC 2011), Rome, Italy, July 24-29, 2011. Ed.: D. Bernardini, 6 S., Sapienza Università di Roma 

Instabilität der gleitenden Fahrzeugkupplungen: Vom analytischen Grundmodell zur Simulation des Gesamtgetriebes
Fidlin, A.; Drozdetskaya, O.
2011. Schwingungen in Antrieben 2011: 7. Fachtagung, Leonberg, 19. und 20. Oktober 2011, 183–194, VDI Verlag 

Dynamik der Fahrzeugkupplungen
Tikhomolov, A.; Klünder, D.; Fidlin, A.
2011. Schwingungen in Antrieben 2011: 7. Fachtagung, Leonberg, 19. und 20. Oktober 2011, 171–181, VDI Verlag 

On the minimal model for the low frequency wobbling instability of friction discs
Fidlin, A.; Drozdetskaya, O.; Waltersberger, B.
2011. European journal of mechanics / A, 30 (5), 665–672. doi:10.1016/j.euromechsol.2011.03.009 

7. Workshop Fahrerassistenzsysteme, Walting im Altmühltal, 30. März - 1. April 2011
Maurer, M.; Dietmayer, K.; Färber, B.; Stiller, C.
2011. (H. Winner, Ed.), Uni-DAS 

Die Autobahn als Fließband
Lauer, M.
2011. Spektrum der Wissenschaft, 2011 (9), 68–88 

3D-objecttracking with a mixed omnidirectional stereo camera system
Lauer, M.; Schönbein, M.; Lange, S.; Welker, S.
2011. Mechatronics, 21 (2), 390–398 

Probabilistic Rail Vehicle Localization With Eddy Current Sensors in Topological Maps
Hensel, S.; Hasberg, C.; Stiller, C.
2011. IEEE Transactions on Intelligent Transportation Systems, 12 (4), 1525–1536. doi:10.1109/TITS.2011.2161291 

Modellbasierte Erkennung von Regentropfen in Einzelbildern zur Berbesserung von videobasierten Fahrerassistenzsystemen
Roser, M.; Stiller, C.
2011. 7. Workshop Fahrerassistenzsysteme (FAS 2011), Walting im Altmühltal, 30. März - 1. April 2011. Hrsg.: M. Maurer, 14–23, Uni-DAS 

Novel two-stage algorithm for non-parametric cast shadow recognition
Roser, M.; Lenz, P.
2011. 2011 IEEE Intelligent Vehicles Symposium (IV 2011), Baden-Baden, June 5-9, 2011, 1116–1121, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/IVS.2011.5940560