F³ process design for fine chemical and pharmaceutical transformations Müller, F.; Sanchez, R. R.; Wrate, T.; Davison, S.; Manipura, A.; Martin, E. B.; Montague, G. A.; Kraut, M.; Haas-Santo, K.; Forsberg, K.; Rasmuson, A. C.; Singh, R.; Gernaey, K. V.; Gani, R.; Woodley, J. M. 2010. 19th Internat.Congress of Chemical and Process Engineering (CHISA 2010) and the 7th European Congress of Chemical Engineering (ECCE-7), Praha, CZ, August 28 - September 1, 2010
Comparison of cryogenic temperature sensor installation inside or outside the piping Müller, R.; Süßer, M. 2010. Weisend, J.G. [Hrsg.] Advances in Cryogenic Engineering : Transactions of the Internat.Cryogenic Engineering Conf., Tucson, Ariz., June 28 - July 2, 2009 Melville, N.Y. : AIP, 2010 (AIP Conference Proceedings ; 1218) (Advances in Cryogenic Engineering ; 55B), 1641–46
Commissioning of the cryogenic transfer line for the KATRIN experiment Grohmann, S.; Gil, W.; Neumann, H.; Weiss, C. 2010. Weisend, J.G. [Hrsg.] Advances in Cryogenic Engineering : Transactions of the Internat.Cryogenic Engineering Conf., Tucson, Ariz., June 28 - July 2, 2009 Melville, N.Y. : AIP, 2010 (AIP Conference Proceedings ; 1218) (Advances in Cryogenic Engineering ; 55B), 1095–1102
CFD-analysis of the moderator water flow in the HPLWR Kunik, C.; Miotto, A.; Schulenberg, T. 2010. 2010 Internat.Congress on Advances in Nuclear Power Plants (ICAPP ’10), San Diego, Calif., June 13-17, 2010 Proc.on CD-ROM Paper 10055 La Grange Park, Ill. : American Nuclear Society, 2010, 79–86
Analysis of QUENCH-ACM experiments using SCDAP/RELAP5 Birchley, J.; Stuckert, J. 2010. 2010 Internat.Congress on Advances in Nuclear Power Plants (ICAPP ’10), San Diego, Calif., June 13-17, 2010 Proc.on CD-ROM Paper 10289 La Grange Park, Ill. : American Nuclear Society, 2010, 941–50
Morse indexes for piecewise linear functions Pallaschke, D.; Urbanski, R. 2010. Nonlinear analysis and optimization. Vol 2: Optimization. Ed.: A. Leizarowitz, 213–223, Am. Math. Soc
Introduction of tensile forces with mechanical fasteners in sandwich panels Käpplein, S.; Misiek, T.; Dacheva, A.; Ummenhofer, T. 2010. Proceedings of the 4th International Conference on Steel & Composite Structures, ICSCS ’10, 21-23 July 2010, Sydney, Australia. Ed.: B. Uy, 389–390, Res. Publ. Services
Over-voltage trigger device for Marx generators Sack, M.; Stängle, R.; Müller, G. 2010. 3rd Euro-Asian Pulsed Power Conf. (EAPPC 2010) and 18th Internat.Conf.on High-Power Beams (BEAMS 2010), Jeju Island, Korea, October 11-15, 2010 Book of Abstracts Proc.on USB-Stick
Improved electrolytes for lithium ion batteries Li, B.; Hanemann, T.; Schulz, M.; Chen, D.; Mönig, R.; Schubert, T.; Taige, M. 2010. 1st Internat.Conf.on Materials for Energy, Karlsruhe, July 4-8, 2010
Fuel rod cladding material behavior under severe accident conditions Grosse, M.; Stuckert, J.; Steinbrück, M. 2010. Materials Research Society Fall Meeting, Boston, Mass., November 30 - December 4, 2009 Materials Research Society Spring Meeting, San Francisco, Calif., April 5-9, 2010
The stability of solvent-free Mg[B₁₂H₁₂] Roth, A.; Röhm, E.; Setten, M. van; Fichtner, M. 2010. 1st Internat.Conf.on Materials for Energy, Karlsruhe, July 4-8, 2010
Over-voltage trigger device for Marx generators Sack, M.; Stängle, R.; Müller, G. 2010. 3rd Euro-Asian Pulsed Power Conf. (EAPPC 2010) and 18th Internat.Conf.on High-Power Beams (BEAMS 2010), Jeju Island, Korea, October 11-15, 2010 Book of Abstracts Proc.on USB-Stick, 246
Progress and test of the spherical matched load designed for 2 MW-CW Bruschi, A.; Bin, W.; Cirant, S.; Dell’Era, F.; Gantenbein, G.; Leonhardt, W.; Muzzini, V.; Samartsev, A.; Schmid, M. 2010. Workshop on RF Heating Technology of Fusion Plasmas, Como, I, September 13-15, 2010 Folien auf CD-ROM
In-mould labelling of micro-structured ceramic parts Vorster, E.; Kucera, A.; Richter, H. J.; Piotter, V. 2010. Pfefferkorn, F.E. [Hrsg.] ICOMM/4M 2010 : The 5th Internat.Conf.on MicroManufacturing, Madison, Wis., April 5-8, 2010 Proc.on CD-ROM Paper No.69 Madison, Wis. : University of Wisconsin, 2010
A modular Bi-directional flow control microsystem Megnin, C.; Kohl, M. 2010. Borgmann, H. [Hrsg.] Actuator 2010 : 12th Internat.Conf.on New Actuators, Bremen, June 14-16, 2010 Bremen : WFB Wirtschaftsförderung Bremen GmbH, Div.Messe Bremen, 2010
Microreactors for gas/liquid reactions Hecht, K. J.; Pfeifer, P.; Kraushaar-Czarnetzki, B.; Dittmeyer, R. 2010. BASF Internat.Summer Course for Scientists and Engineers, Ludwigshafen, August 17-27, 2010
In-mould labelling of micro-structured ceramic parts Vorster, E.; Kucera, A.; Richter, H. J.; Piotter, V. 2010. Pfefferkorn, F.E. [Hrsg.] ICOMM/4M 2010 : The 5th Internat.Conf.on MicroManufacturing, Madison, Wis., April 5-8, 2010 Proc.on CD-ROM Paper No.69 Madison, Wis. : University of Wisconsin, 2010, 413–15
A modular Bi-directional flow control microsystem Megnin, C.; Kohl, M. 2010. Borgmann, H. [Hrsg.] Actuator 2010 : 12th Internat.Conf.on New Actuators, Bremen, June 14-16, 2010 Bremen : WFB Wirtschaftsförderung Bremen GmbH, Div.Messe Bremen, 2010, 250–253
Easing cracks with the method of tensile triangles Mattheck, C.; Wissner, C.; Tesari, I.; Bethge, K. 2010. Brebbia, C.A. [Hrsg.] 5th Internat.Conf.on Comparing Design in Nature with Science and Engineering, Pisa, I, June 28-30, 2010 Southampton [u.a.] : WIT Press, 2010 (Design and Nature ; 5) (WIT Transactions on Ecology and the Environment ; 138)
Deflections and vibrations of the ITER ECRH upper launcher Strauss, D.; Scherer, T.; Aiello, G.; Meier, A.; Schreck, S.; Späh, P.; Vaccaro, A. 2010. 16th Joint Workshop on Electron Cyclotron Emission and Electron Cyclotron Resonance Heating, Sanya, China, April 12-15, 2010 Book of Abstracts
KIT – Die Forschungsuniversität in der Helmholtz-Gemeinschaft