Servicefähigkeit: Eine Methode zur Serviceplanung und simulativen Bestimmung der Servicefähigkeit auf Basis des Ausfallverhaltens von Maschinenkomponenten: Dissertation
Behmann, B.
2013. Shaker 

9th Conference on "Stochastic Models of Manufacturing and Service Operations" : May 25 - May 30, 2013, Kloster Seeon, Germany
Tempelmeier, H. (Ed.)
2013. Katholische Universität Eichstätt-Ingolstadt (KU) 

6th IFAC Conference on Management and Control of Production and Logistics 2013
Internationale Förderung für Automatische Lenkung (Ed.)
2013. Curran 

2013 3rd International Electric Drives Production Conference (E|DPC)
Institute of Electrical and Electronics Engineers (IEEE) (Ed.)
2013. Institute of Electrical and Electronics Engineers (IEEE) 

Interdisciplinarity as a success factor - service and reliability planning integrated in a production model
Appel, D.; Genssler, K.; Stricker, N.; Lanza, G.
2013. R. D. J. M. Steenbergen, P. van Gelder, S. Miraglia & A. C. W. M. T. Vrouwenvelder (Eds.), Safety, reliability and risk analysis: beyond the horizon Hrsg.: Steenbergen, Raphaël D. J. M.; Gelder, Pieter van; Miraglia, Simona; Vrouwenvelder, A. C. W. M. Ton, 1325–1332, CRC Press-Taylor & Francis Group 

11th IMEKO TC-14 International Symposium on Measurement and Quality Control (ISMQC 2013) : Cracow [and Kielce], Poland, 11 - 13 September 2013
International Measurement Confederation. Technical Committee Measurement of Geometrical Quantities (Ed.)
2013. Curran 

IEEE International Conference on Automation Science and Engineering (CASE) 2013: 17 - 20 Aug. 2013, Madison, WI, USA
Institute of Electrical and Electronics Engineers IEEE Robotics and Automation Society (Ed.)
2013. Institute of Electrical and Electronics Engineers (IEEE) 

IEEE International Conference on Industrial Engineering and Engineering Management (IEEM), 2013: 10 - 13 Dec. 2013, Bangkok, Thailand
Institute of Electrical and Electronics Engineers (IEEE) (Ed.)
2013. Institute of Electrical and Electronics Engineers (IEEE) 

Disruptive supply network models in future industrial systems: configuring for resilience and sustainability : 17th Cambridge International Manufacturing Symposium : 19 and 20 September 2013, Møller Centre, Cambridge : symposium proceedings / IfM, Center for International Manufacturing; University of Cambridge
Institute for Manufacturing (Ed.)
2013. University of Cambridge, Institute for Manufacturing, Department of Engineering 

Proceedings / 13th Stuttgart International Symposium Automotive and Engine Technology : 26 and 27 February 2013, Stuttgart, Germany
Forschungsinstitut für Kraftfahrwesen und Fahrzeugmotoren (Ed.)
2013. ATZlive 

Spatial alignment of joining partners without fixtures, based on component-inherent markings
Fleischer, J.; Lanza, G.; Otter, M.; Elser, J.
2013. Journal of Manufacturing Systems, 32 (3), 489–497. doi:10.1016/j.jmsy.2013.04.004 

Social Media in der Erwachsenenbildung : Ein Best-Practice-Leitfaden aus Baden-Württemberg
Weichsel, D.; Sexauer, A.; Fluhrer, P.; Newrly, P.
2013  

Optimization model for value-added networks of globally operating companies
Lanza, G.; Ruhrmann, S.; Stricker, N.; Kohl, M.
2013. Challenges for sustainable operations : planning, implementing and managing reverse networks ; 22nd International Conference on Production Research, ICPR 22 ; July 28 - August 1, 2013 in Inguassu Falls, Brazil proceedings, 1–7, International Foundation for Production Research (IFPR) 

Leitfaden zur Planung und Durchführung von Sourcingprojekten: Anwender-Leitfaden und CD-ROM
Lanza, G.; Ruhrmann, S.
2013. FQS Forschungsgemeinschaft 

Planning Approach for Designing and Evaluating Product and Production Adaptions to Local Market Conditions
Lanza, G.; Ruhrmann, S.; Moser, E.
2013. M. F. Zaeh (Ed.), Enabling Manufacturing Competitiveness and Economic Sustainability : Proceedings of the 5th International Conference on Changeable, Agile, Reconfigurable and Virtual Production (CARV 2013), Munich, Germany, October 6th-9th 2013. Ed.: Michael F. Zaeh, 297–302, Springer. doi:10.1007/978-3-319-02054-9_50 

Methodological Approach to Evaluate Product Adaptations Based on Real Options
Lanza, G.; Ruhrmann, S.
2013. A. Chakrabarti (Ed.), 22nd CIRP Design Conference 2012: Sustainable Product Development. Ed. by: Amaresh Chakrabarti, 227–237, Springer. doi:10.1007/978-1-4471-4507-322 

Lieferantenqualifizierung: Ein Modell zur Entscheidungsunterstützung und -absicherung
Lanza, G.; Ruhrmann, S.
2013. wt Werkstattstechnik online, 103 (11-12), 933–938 

Datenfusion bei der Messung von Mikrozahnrädern - Charakterisierung von Mikroverzahnungen mittels Koordinatenmesstechnik und Computertomografie
Lanza, G.; Haefner, B.
2013. wt Werkstattstechnik online, 103 (11/12), 841–846 

Product-service integration for sustainable solutions: Proceedings of the 5th CIRP International Conference on Industrial Product-Service Systems, Bochum, Germany, March 14th - 15th, 2013
Meier, H. (Ed.)
2013. Springer Verlag. doi:10.1007/978-3-642-30820-8 

Proceedings of the 13th International Conference of the European Society for Precision Engineering and Nanotechnology: May 27th - 31st, 2013, Berlin, Germany
Leach, R. (Ed.)
2013. European Society for Precision Engineering and Nanotechnology (euspen) 

Innovative product-services for robust global supply chains - a viewpoint
Lanza, G.; Stricker, N.; Stoll, J.
2013. Disruptive supply network models in future industrial systems : configuring for resilience and sustainability ; 17th Cambridge International Manufacturing Symposium 19 and 20 September, Cambridge ; symposium proceedings, 386–400, University of Cambridge 

Enabling manufacturing competitiveness and economic sustainability: Proceedings of the 5th International Conference on Changeable, Agile, Reconfigurable and Virtual Production (CARV) 2013
Zaeh, M. F. (Ed.)
2013. Springer. doi:10.1007/978-3-319-02054-9 

Robust manufacturing control: Proceedings of the CIRP sponsored conference RoMaC 2012, Bremen, Germany, 18th-20th June 2012
Windt, K. (Ed.)
2013. Springer Verlag. doi:10.1007/978-3-642-30749-2 

19th International Conference on Composite Materials (ICCM) 2013
Hoa, S. van (Ed.)
2013. Curran 

6. Kolloquium Mikroproduktion 2013: Braunschweig, 8. Oktober 2013
Tutsch, R. (Ed.)
2013. Shaker 

Analyzing the Potential of Source Sentence Reordering in Statistical Machine Translation
Herrmann, T.; Weiner, J.; Niehues, J.; Waibel, A.
2013. Proceedings of the 10th International Workshop on Spoken Language Translation : Papers, December 5-6, 2013, Heidelberg, Germany. Ed.: J. Ying Zhang  

EU-BRIDGE MT: Text translation of talks in the EU-BRIDGE project
Freitag, M.; Peitz, S.; Wuebker, J.; Ney, H.; Durrani, N.; Huck, M.; Koehn, P.; Ha, T.-L.; Niehues, J.; Mediani, M.; Herrmann, T.; Waibel, A.; Bertoldi, N.; Cettolo, M.; Federico, M.
2013. Proceedings of the Tenth International Workshop on Spoken Language Translation (IWSLT 2013) 

Report on the 10th IWSLT evaluation campaign
Cettolo, M.; Niehues, J.; Stüker, S.; Bentivogli, L.; Federico, M.
2013. Proceedings of the Tenth International Workshop on Spoken Language Translation (IWSLT 2013) 

Smart Product Engineering : Proceedings of the 23rd CIRP Design Conference, Bochum, Germany, March 11th - 13th, 2013
Abramovici, M.; Stark, R. (Eds.)
2013. Springer Verlag. doi:10.1007/978-3-642-30817-8 

63rd General Assemly of CIRP 2013: Copenhagen, Denmark - August 18-24, 2013
The International Academy for Production Engineering (Ed.)
2013. Elsevier Science 

22nd CIRP Design Conference 2012: Sustainable Product Development
Chakrabarti, A. (Ed.)
2013. Springer Verlag. doi:10.1007/978-1-4471-4507-3 

46th CIRP Conference on Manufacturing Systems (CMS) 2013
Cunha, P. F. (Ed.)
2013. Elsevier 

Proceedings / 11th Global Conference on Sustainable Manufacturing 2013: Innovative solutions ; Berlin, Germany, 23rd - 25th September, 2013 ; proceedings
Seliger, G. (Ed.)
2013. Universitätsverlag der TU Berlin 

ISMTII 2013: 11th International Symposium on Measurement Technology and Intelligent Instruments: Metrology - Master global challenges, July 1st - July 5th, 2013, RWTH, Aachen, Germany
Schmitt, R.; Bosse, H. (Eds.)
2013. Apprimus Wissenschaftsverlag 

Safety, reliability and risk analysis: beyond the horizon: Proceedings of the European Safety and Reliability Conference, ESREL 2013, Amsterdam, The Netherlands, 29 September-2 October 2013
Steenbergen, R. D. J. M.; Gelder, P. van; Miraglia, S.; Vrouwenvelder, A. C. W. M. T. (Eds.)
2013. CRC Press-Taylor & Francis Group 

Quantum chemical study of inner-sphere complexes of trivalent lanthanide and actinide ions on the corundum (110) surface
Polly, R.; Schimmelpfennig, B.; Flörsheimer, M.; Rabung, T.; Kupcik, T.; Klenze, R.; Geckeis, H.
2013. Radiochimica acta, 101 (9), 561–570. doi:10.1524/ract.2013.2054 

Mineral–Water Interface Reactions of Actinides
Geckeis, H.; Lützenkirchen, J.; Polly, R.; Rabung, T.; Schmidt, M.
2013. Chemical Reviews, 113 (2), 1016–1062. doi:10.1021/cr300370h 

A theoretical study of the dynamical switching of a single spin by exchange forces
Wieser, R.; Caciuc, V.; Lazo, C.; Hölscher, H.; Vedmedenko, E. Y.; Wiesendanger, R.
2013. New Journal of Physics, 15 (1), Artk.Nr.: 013011. doi:10.1088/1367-2630/15/1/013011  

Calorimetric measurement of work in a quantum system
Pekola, J. P.; Solinas, P.; Shnirman, A.; Averin, D. V.
2013. New Journal of Physics, 15 (11), Artk.Nr.: 115006. doi:10.1088/1367-2630/15/11/115006  

Enhancing and reducing the Rashba-splitting at surfaces by adsorbates: Na and Xe on Bi/Cu(111)
Bentmann, H.; Reinert, F.
2013. New Journal of Physics, 15 (11), Artk.Nr.: 115011. doi:10.1088/1367-2630/15/11/115011  

Photon transport in one-dimensional systems coupled to three-level quantum impurities
Martens, C.; Longo, P.; Busch, K.
2013. New Journal of Physics, 15 (8), Artk.Nr.: 083019. doi:10.1088/1367-2630/15/8/083019  

Fluoride removal from Tanzanian waters: comparing physic-chemical treatment and membrane filtration
Schäfer, A. I.; Shen, J.; Thole, B.; Mtalo, F.
2013. Safe Global Water & Sanitation Summit, Nelson Mandela African Institute of Science & Technology (2013), Arusha, Tanzania, January 30–February 1, 2013 

Solar- and Wind-Powered Desalination of Brackish Water
Richards, B. S.; Schäfer, A. I.
2013. University of Dar es Salaam: CoET Visiting Professors Seminar (2013), Dar es Salaam, Tanzania, February 5, 2013 

Structure formation in organic thin films observed in real time by energy dispersive near-edge x-ray absorption fine-structure spectroscopy
Scholz, M.; Sauer, C.; Wiessner, M.; Nguyen, N.; Schöll, A.; Reinert, F.
2013. New Journal of Physics, 15 (8), Artk.Nr.: 083052. doi:10.1088/1367-2630/15/8/083052  

Strain relief and shape oscillations in site-controlled coherent SiGe islands
Hrauda, N.; Zhang, J. J.; Groiss, H.; Etzelstorfer, T.; Holý, V.; Bauer, G.; Deiter, C.; Seeck, O. H.; Stangl, J.
2013. Nanotechnology, 24 (33), Artk.Nr:: 335707. doi:10.1088/0957-4484/24/33/335707  

Einsatz der psychischen Befindlichkeit als Frühwarnsymptom für Überbelastungen
Bossmann, T.
2013. Leistungssport, 43 (4), 33–36 

Laser Additive Manufacturing of Gas Permeable Structures
Klahn, C.; Bechmann, F.; Hofmann, S.; Dinkel, M.; Emmelmann, C.
2013. Physics Procedia, 41, 873–880. doi:10.1016/j.phpro.2013.03.161  

Manufacturing for Design, Laseradditive Fertigung ermöglicht neuartige Funktionsbauteile
Emmelmann, C.; Herzog, D.; Kranz, J.; Klahn, C.; Munsch, M.
2013. Industrie-Management, 29 (2), 58–62 

Factor analysis and advanced inelastic background analysis in XPS: Unraveling time dependent contamination growth on multilayers and thin films
Gusenleitner, S.; Hauschild, D.; Graber, T.; Ehm, D.; Tougaard, S.; Reinert, F.
2013. Surface science, 616, 161–165. doi:10.1016/j.susc.2013.05.017 

High-res WRF case study on a large haboob storm
Roberts, A.; Knippertz, P.
2013. Africa Process Evaluation Group: Met Office (2013), Exeter, United Kingdom, March 19, 2013 

Low-level jets and dust in HadGEM
Fiedler, S.; Schepanski, K.; Heinold, B.; Knippertz, P.; Tegen, I.
2013. Africa Process Evaluation Group: Met Office (2013), Exeter, United Kingdom, March 19, 2013 

Dust emission mechanisms in Cascade runs
Knippertz, P.; Heinold, B.; Marsham, J. H.; Fiedler, S.; Dixon, N. S.; Schepanski, K.; Laurent, B.; Tegen, I.
2013. Africa Process Evaluation Group: Met Office (2013), Exeter, United Kingdom, March 19, 2013 

Reconstruction of drip-water δ${}^{18}$O based on calcite oxygen and clumped isotopes of speleothems from Bunker Cave (Germany)
Kluge, T.; Affek, H. P.; Marx, T.; Aeschbach-Hertig, W.; Riechelmann, D. F. C.; Scholz, D.; Riechelmann, S.; Immenhauser, A.; Richter, D. K.; Fohlmeister, J.; Wackerbarth, A.; Mangini, A.; Spötl, C.
2013. Climate of the past, 9 (1), 377–391. doi:10.5194/cp-9-377-2013  

Photocatalytic hydrogen production of Co(OH)${}_2$ nanoparticle-coated α-Fe${}_2$O${}_3$ nanorings
Wender, H.; Gonçalves, R. V.; Dias, C. S. B.; Zapata, M. J. M.; Zagonel, L. F.; Mendonça, E. C.; Teixeira, S. R.; Garcia, F.
2013. Nanoscale, 5 (19), Art.-Nr.: 9310. doi:10.1039/c3nr02195e 

Wir schreiben Bücher : Ganzheitliche Literacy-Förderung für die 3. und 4. Klasse
Klopsch, B.; Sliwka, A.; Schmidt, M.-S.
2013. Verlagsgruppe Julius Beltz 

The formation and dust lifting processes associated with a large Saharan meso-scale convective system (MCS)
Roberts, A.; Knippertz, P.
2013. European Geosciences Union General Assembly (EGU 2013), Vienna, Austria, April 7–12, 2013 

How well is the intertropical discontinuity (ITD) represented in different reanalysis products?
Roberts, A.; Knippertz, P.
2013. European Geosciences Union General Assembly (EGU 2013), Vienna, Austria, April 7–12, 2013 

Formation and maintenance of nocturnal low-level stratus over the southern West African monsoon region during AMMA 2006
Schuster, R.; Fink, A. H.; Knippertz, P.
2013. European Geosciences Union General Assembly (EGU 2013), Vienna, Austria, April 7–12, 2013 

How a dusty cold pool can change the diurnal evolution of the Saharan Atmospheric Boundary Layer
Kocha, C.; Flamant, C.; Berckmans, J.; Garcia-Carreras, L.; Knippertz, P.; Lafore, J.-P.; Marnas, F.; Marsham, J.; Parker, D.; Rosenberg, P.; Ryder, C.; Tulet, P.; Washington, R.
2013. European Geosciences Union General Assembly (EGU 2013), Vienna, Austria, April 7–12, 2013 

Large eddy simulations of nocturnal low-level jets over desert regions and implications for dust emission
Heinold, B.; Knippertz, P.; Marsham, J. H.
2013. European Geosciences Union General Assembly (EGU 2013), Vienna, Austria, April 7–12, 2013 

The role of deep convection and low-level jets for dust emission in summertime West Africa – estimates from convection-permitting dust simulations
Heinold, B.; Knippertz, P.; Marsham, J. H.; Fiedler, S.; Dixon, N. S.; Schepanski, K.; Laurent, B.; Tegen, I.
2013. European Geosciences Union General Assembly (EGU 2013), Vienna, Austria, April 7–12, 2013 

A seamless approach to assess model uncertainties in climate projections of severe European windstorms
Trzeciak, T. M.; Knippertz, P.; Owen, J. S. R.
2013. 4th Working Group on Numerical Experimentation Workshop (2013), Exeter, United Kingdom, April 15–19, 2013 

The role of deep convection and low-level jets for dust emission in summertime West Africa
Marsham, J. H.; Heinold, B.; Knippertz, P.; Fiedler, S.; Dixon, N. S.; Schepanski, K.; Laurent, B.; Tegen, I.
2013. 4th Working Group on Numerical Experimentation Workshop (2013), Exeter, United Kingdom, April 15–19, 2013 

Deep moist convection as a governor of the West African Monsoon
Marsham, J. H.; Dixon, N. S.; Garcia-Carreras, L.; Lister, G. M. S.; Parker, D. J.; Knippertz, P.
2013. 4th Working Group on Numerical Experimentation Workshop (2013), Exeter, United Kingdom, April 15–19, 2013 

The roles of microphysics and dynamics on strong winds in two intense extratropical storms
Baker, T. P.; Knippertz, P.; Blyth, A.
2013. Research Workshop on European Storms (2013), Exeter, United Kingdom, September 2–4, 2013 

Can we trust climate models to realistically represent severe European windstorms?
Trzeciak, T.; Knippertz, P.; Owen, J.
2013. Research Workshop on European Storms (2013), Exeter, United Kingdom, September 2–4, 2013 

The role of the stratosphere in explosive deepening of extratropical cyclones
Knippertz, P.; Wilbraham, R.; Trzeciak, T.; Owen, J.; Odell, L.; Fink, A. H.; Pinto, J. G.
2013. Research Workshop on European Storms (2013), Exeter, United Kingdom, September 2–4, 2013 

Forecast quality and predictability of severe European cyclones
Owen, J.; Knippertz, P.; Trzeciak, T.
2013. Research Workshop on European Storms (2013), Exeter, United Kingdom, September 2–4, 2013 

Severe European cyclones: a storm-prone situation perspective
Owen, J. S. R.; Knippertz, P.; Trzeciak, T. M.
2013. 13th EMS Annual Meeting (2013), Reading, United Kingdom, September 9–13, 2013 

Forecast quality and predictability of severe European cyclones
Owen, J. S. R.; Knippertz, P.; Trzeciak, T. M.
2013. 13th EMS Annual Meeting (2013), Reading, United Kingdom, September 9–13, 2013 

The roles of microphysics and dynamics on strong winds in two intense extratropical storms
Baker, T. P.; Knippertz, P.; Blyth, A.
2013. 13th EMS Annual Meeting (2013), Reading, United Kingdom, September 9–13, 2013 

The importance of the representation of deep convection for modeled dust-generating winds over West Africa during summer
Heinold, B.; Marsham, J. H.; Knippertz, P.; Fiedler, S.; Dixon, N. S.; Schepanski, K.; Laurent, B.; Parker, D. J.; Lister G. M. S.; Tegen, I.
2013. Africa Climate Conference (2013), Arusha, Tanzania, October 15–18, 2013 

The West African monsoon
Lafore, J.-P.; Biasutti, M.; Knippertz, P.; Taylor, C.
2013. 5th International Workshop on Monsoons (IWM 2013), Macao, Macau, October 28–31, 2013 

Climatology and dynamics of nocturnal low-level stratus over the southern West African monsoon region
Fink, A. H.; Schuster, R.; Knippertz, P.; Linden, R. van der
2013. AGU Fall Meeting (2013), San Francisco, CA, USA, December 9–13, 2013 

How much North African dust emission is associated with breakdowns of nocturnal low-level jets?
Fiedler, S.; Schepanski, K.; Heinold, B.; Knippertz, P.; Tegen, I.
2013. AGU Fall Meeting (2013), San Francisco, CA, USA, December 9–13, 2013 

I have a Dream: Safe Drinking Water for all Children
Schäfer A.I.
2013. KIT Karlsruhe (2013), Karlsruhe, Germany, February 14, 2013 

Renewable energy powered membrane filtration for brackish water desalination
Schäfer, A. I.; Richards, B. S.
2013. Fluoride Removal from Drinking Water: Health and Technology Implications: An interdisciplinary research workshop (2013), Arusha, Tanzania, September 12–13, 2013 

Renewable Energy powered Membrane Filtration
Richards, B. S.; Schäfer, A. I.
2013. King Abdullah University of Science and Technology (KAUST 2013), Jeddah, Saudi Arabia, October 28, 2013 

Listvenite from Antina čuka as potential gemstone resource
Simić, V.; Šarić, K.; Miladinović, Z.; Andrić-Tomašević, N.; Vuković, N.
2013. 3rd International Conference „Harmony of Nature and Spirituality in Stone“, book of Proceedings, Kragujevac, SRB, 159–166, University of Kragujevac 

Minimum time-dependent travel times with contraction hierarchies
Batz, G. V.; Geisberger, R.; Sanders, P.; Vetter, C.
2013. Journal of experimental algorithmics, 18 (1), Article no: 1.4. doi:10.1145/2444016.2444020  

Concepts for rapid tuning and switching of x-ray energies
Jark, W.; Last, A.
2013. L. Juha, S. Bajt, R. London, R. Hudec & L. Pina (Eds.), Damage to VUV, EUV, and X-ray Optics IV; and EUV and X-ray Optics: Synergy between Laboratory and Space III. Ed.: L. Juha, Art.-Nr.: 877712, SPIE. doi:10.1117/12.2017446 

Felix Wankel. Innovationskulturen im Umfeld der „Einsamer-Wolf GmbH“
Popplow, M.
2013. Innovationskulturen um das Automobil : Von gestern bis morgen. Hrsg.: R.-J. Gleitsmann, 131–155, Heel 

Schlusskommentar. Annäherungen und Perspektiven zum Tagungsthema „Stoffströme und Stoffkreisläufe“ aus Sicht der Technikgeschichte
Popplow, M.
2013. Ferrum, 85, 87–89 

Anstoß für eine überfällige Debatte (Kommentar zu Wolfgang König: Strukturen und Akteure – Ein Vorschlag zur Konzeptualisierung technisch-historischer Entwicklung)
Popplow, M.
2013. Erwägen, Wissen, Ethik, 24, 577–580 

Vom Lastenrad zum Cargobike
Popplow, M.
2013. Kultur & Technik, 37 (2), 22–27 

Court mathematicians, Rosicrucians, and engineering experts : The German translation of Guidobaldo del Monte’s Mechanicorum liber by Daniel Mögling (1629)
Popplow, M.
2013. Guidobaldo del Monte (1545-1607) : Theory and Practice of the Mathematical Disciplines from Urbino to Europe. Hrsg.: A. Becchi, 293–316, Edition Open Access (eoa)  

Einleitung: Technik und Globalgeschichte. Globalisierung, Kulturvergleich und Kulturkontakt als Herausforderung für die Technikgeschichte
Popplow, M.; Schäfer, D.
2013. Technikgeschichte, 80 (1), 3–11 

Auto - Kultur - Geschichte
Möser, K.; Popplow, M.; Uhl, E. (Eds.)
2013. Universität Stuttgart, Internationales Zentrum für Kultur- und Technikforschung 

Vacuum-free preparation of 7.5% efficient Cu${}_2$ZnSn(S,Se)${}_4$ solar cells based on metal salt precursors
Schnabel, T.; Löw, M.; Ahlswede, E.
2013. Solar energy materials & solar cells, 117, 324–328. doi:10.1016/j.solmat.2013.06.021 

Cu3Ag alloy capped with Ni transparent electrodes for indium-free organic photovoltaic and lighting devices
Ghosh, D. S.; Formica, N.; Chen, T. L.; Hwang, J.; Eickhoff, C.; Pruneri, V.
2013. Solar energy materials & solar cells, 116, 89–93. doi:10.1016/j.solmat.2013.04.012 

Corrigendum to ‘Highly stable Ag–Ni based transparent electrodes on PET substrates for flexible organic solar cells’ [Solar Energy Materials and Solar Cells 107 (2012) 63–68]
Formica, N.; Ghosh, D. S.; Chen, T. L.; Eickhoff, C.; Bruder, I.; Pruneri, V.
2013. Solar energy materials & solar cells, 108, 223. doi:10.1016/j.solmat.2012.09.009 

Oxidation-free and ultra-smooth thin silver films grown on a copper seed layer
Formica, N.; Ghosh, D. S.; Carrilero, A.; Chen, T. L.; Simpson, R. E.; Pruneri, V.
2013. 2013 Conference on Lasers & Electro-Optics Europe & International Quantum Electronics Conference CLEO EUROPE/IQEC: 12-16 May 2013, Munich, Germany, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/CLEOE-IQEC.2013.6800940 

Ultrastable and Atomically Smooth Ultrathin Silver Films Grown on a Copper Seed Layer
Formica, N.; Ghosh, D. S.; Carrilero, A.; Chen, T. L.; Simpson, R. E.; Pruneri, V.
2013. ACS applied materials & interfaces, 5 (8), 3048–3053. doi:10.1021/am303147w 

Physikalische Tarnkappen
Schittny, R.; Wegener, M.
2013. Spektrum der Wissenschaft, (80) 

How the Quantum Efficiency of a Highly Emissive Binuclear Copper Complex Is Enhanced by Changing the Processing Solvent
Volz, D.; Nieger, M.; Friedrichs, J.; Baumann, T.; Bräse, S.
2013. Langmuir, 29 (9), 3034–3044. doi:10.1021/la3039522 

High-speed 3D direct laser writing of micro-optical elements
Radke, A.; Fries, B.; Eicke, D.; Niesler, F.; Baretzky, C.; Bückmann, T.; Wegener, M.; Thiel, M.
2013. 2013 Conference on Lasers and Electro-Optics (CLEO): 9-14 June 2013, San Jose, CA, USA, Institute of Electrical and Electronics Engineers (IEEE) 

Highly Luminescent, Dinuclear Copper(I)-Complexes: Photophysical Properties and Application in Organic Light-Emitting Diodes (OLEDs)
Volz, D.; Zink, D. M.; Baumann, T.; Nieger, M.
2013. Abstract Book ISPPCC 2013 

Multicolor silicon-quantum-dot light-emitting diodes
Maier-Flaig, F.; Lemmer, U.; Ozin, G.
2013. SPIE newsroom, online 

Organic semiconductor distributed feedback (DFB) laser pixels fabricated via nanograting transfer and ink-jet printing
Liu, X.; Klinkhammer, S.; Wang, Z.; Sudau, K.; Mechau, N.; Vannahme, C.; Mappes, T.; Lemmer, O.
2013. 2013 Conference on Lasers & Electro-Optics Europe & International Quantum Electronics Conference CLEO EUROPE/IQEC: 12-16 May 2013, Munich, Germany, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/CLEOE-IQEC.2013.6800718 

Analysis and fabrication of optical active nanostructures inspired by the blue Morpho butterfly
Siddique, R. H.; Diewald, S.; Leuthold, J.; Holscher, H.
2013. 2013 Conference on Lasers & Electro-Optics Europe & International Quantum Electronics Conference CLEO EUROPE/IQEC: 12-16 May 2013, Munich, Germany, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/CLEOE-IQEC.2013.6800995