Single-Molecule Junctions Based on Nitrile-Terminated Biphenyls: A Promising New Anchoring Group
Mishchenko, A.; Zotti, L. A.; Vonlanthen, D.; Bürkle, M.; Pauly, F.; Cuevas, J. C.; Mayor, M.; Wandlowski, T.
2011. Journal of the American Chemical Society, 133 (2), 184–187. doi:10.1021/ja107340t 

Lasing without Inversion in Circuit Quantum Electrodynamics
Marthaler, M.; Utsumi, Y.; Golubev, D. S.; Shnirman, A.; Schön, G.
2011. Physical review letters, 107 (9), Art.Nr. 093901. doi:10.1103/PhysRevLett.107.093901 

Charge Sensing Amplification via Weak Values Measurement
Zilberberg, O.; Romito, A.; Gefen, Y.
2011. Physical Review Letters, 106 (8), 080405/1–4. doi:10.1103/PhysRevLett.106.080405 

Electronic Dispersion Anomalies in Iron Pnictide Superconductors
Heimes, A.; Grein, R.; Eschrig, M.
2011. Physical Review Letters, 106 (4), 047003/1–4. doi:10.1103/PhysRevLett.106.047003 

Photonic-crystal time-domain simulations using Wannier functions
Blum, C.; Wolff, C.; Busch, K.
2011. Optics Letters, 36 (2), 307–309. doi:10.1364/OL.36.000307 

The photonic Wannier function approach to photonic crystal simulations: status and perspectives
Busch, K.; Blum, C.; Graham, A. M.; Hermann, D.; Köhl, M.; Macka, P.; Wolff, C.
2011. Journal of Modern Optics, 58 (5-6), 365–383. doi:10.1080/09500340.2010.526256 

Few-photon transport in low-dimensional systems
Longo, P.; Schmitteckert, P.; Busch, K.
2011. Physical review / A, 83 (6), Art.Nr. 063828/1–11. doi:10.1103/PhysRevA.83.063828 

Discontinuous Galerkin methods in nanophotonics
Busch, K.; König, M.; Niegemann, J.
2011. Laser & Photonics Reviews, 5 (6), 773–809. doi:10.1002/lpor.201000045 

Energy-efficient hydrodynamic journal bearings by means of condition monitoring and lubrication flow control
Albers, A.; Nguyen, H. T.; Burger, W.
2011. Insight - Non-Destructive Testing and Condition Monitoring, 53 (8), 431–433. doi:10.1784/insi.2011.53.8.431 

Energieeffizienzsteigerung von stationär betriebenen hydrodynamischen Gleitlagern durch aktive Regelung des Schmiermitteldurchflusses
Albers, A.; Nguyen, H. T.; Burger, W.
2011. Gleit- und Wälzlagerungen: Gestaltung, Berechnung, Einsatz. Tagungsband, Schweinfurt, 24. und 25. Mai 2011, 1 CD-Rom, VDI Verlag 

Modeling Approaches for the Simulation of Curvilinear Fiber-Reinforced Polymer Composites
Albers, A.; Majic, N.; Troll, D.
2011. Seminar: Progress in Simulating Composites, Wiesbaden, Germany, April 6-7, 2011, 16, NAFEMS Deutschland, Österreich, Schweiz GmbH 

Approaches for the macroscale curvilinear modeling of composites based on the fiber patch preforming (FPP) technology
Albers, A.; Majic, N.; Troll, D.
2011. Proceedings of the 3rd ECCOMAS Thematic Conference on the Mechanical Response of Composites, Hannover, Germany, September 21-23 2011. Ed.: R. Rolfes, Leibniz Universität 

Condition Monitoring of dry friction contacs with Acoustic Emission Analyses
Albers, A.; Kelemen, S.
2011. Eighth International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, Cardiff, Wales, June 20 - 22, 2011, 1 CD-Rom, Coxmoor Publ 

Eine mastgeführte Kletterbühne als alternative Montagevorrichtung für Offshore-Windenergieanlagen
Albers, A.; Kelemen, S.
2011. News / Berliner Kreis, Wissenschaftliches Forum für Produktentwicklung e.V, 16 (1), 12–13 

Erfolgsfaktoren der Interdisziplinarität. Ein Bericht
Albers, A.; Ebel, B.; Alink, T.
2011. Wissenschaft im Kontext : Inter- und Transdisziplinarität in Theorie und Praxis. Hrsg.: G. Banse, 203–214, trafo-Wiss.-Verl 

Leichtbaustrategien und Bauweisen
Kopp, G.; Burkardt, N.; Majic, N.
2011. Handbuch Leichtbau: Methoden, Werkstoffe, Fertigung. Hrsg.: F. Henning, 57–76, Carl Hanser Verlag 

Validierung im Produktentstehungsprozess
Albers, A.; Düser, T.
2011. Handbuch Leichtbau: Methoden, Werkstoffe, Fertigung. Hrsg.: F. Henning, 133–142, Carl Hanser Verlag 

Systemleichtbau - ganzheitliche Gewichtsreduzierung
Albers, A.; Burkardt, N.
2011. Handbuch Leichtbau: Methoden, Werkstoffe, Fertigung. Hrsg.: F. Henning, 115–132, Carl Hanser Verlag 

Virtuelle Produktentwicklung
Albers, A.; Majic, N.; Schmid, A.
2011. Handbuch Leichtbau: Methoden, Werkstoffe, Fertigung. Hrsg.: F. Henning, 77–114, Carl Hanser Verlag 

Der Prozess der Produktentstehung
Albers, A.; Braun, A.
2011. Handbuch Leichtbau: Methoden, Werkstoffe, Fertigung. Hrsg.: F. Henning, 5–30, Carl Hanser Verlag 

Der ganz normale Verkehr - Forschung für die Mobilität von morgen
Albers, A.; Behrendt, M.; Rietschel, U.
2011. Spiegel der Wirtschaft Baden-Württemberg, 8–9 

Elicitation of a Reference Process Model for Tool-Based Micro Technologies for Planning & Controlling Purposes and User Support
Albers, A.; Börsting, P.; Turki, T.
2011. Microsystem Technologies, 17 (2), 319–324. doi:10.1007/s00542-011-1254-6 

A Numerical Model for Investigating Mixed Lubricated Systems taking into account Adhesion Effects and Surface Roughness
Albers, A.; Lorentz, B.
2011. ECOTRIB 2011: 3rd European Conference on Tribology in tandem with Viennano ’11: 4th Vienna International Conference on Nano-Technology, Wien, Austria, June 7 - 9, 2011. Ed.: F. Franek, 1 CD-Rom, Österreichische Tribologische Gesellschaft 

Micro Structuring of the Tribological Contact in a CVT
Albers, A.; Drechsler, S.; Bernhardt, J.; Ott, S.
2011. ECOTRIB 2011: 3rd European Conference on Tribology in tandem with Viennano ’11: 4th Vienna International Conference on Nano-Technology, Wien, Austria, June 7 - 9, 2011. Ed.: F. Franek, 1 CD-Rom, Österreichische Tribologische Gesellschaft 

Increasing Energy-Efficiency of Hydrodynamic Journal Bearings by Closed-Loop Lubrication Flow Control and Condition Monitoring
Albers, A.; Nguyen, H. T.; Burger, W.
2011. ECOTRIB 2011: 3rd European Conference on Tribology in tandem with Viennano ’11: 4th Vienna International Conference on Nano-Technology, Wien, Austria, June 7 - 9, 2011. Ed.: F. Franek, 1 CD-Rom, Österreichische Tribologische Gesellschaft 

EPOS 2 ad LHC results
Pierog, T.; Karpenko, I.; Werner, K.
2011. QCD and High Energy Interactions : 46th Rencontres de Moriond, La Thuile, I, March 20-27, 2011 

EPOS 2 ad LHC results
Pierog, T.; Karpenko, I.; Werner, K.
2011. Auge, E. [Hrsg.] QCD and High Energy Interactions : Proc.of the 46th Rencontres de Moriond, La Thuile, I, March 20-27, 2011 Saigon : The GIOI Publishers, 2011, 183–186 

Simplified description of auto-ignition around a single fuel Droplet
Sharma, P.; Schießl, R.; Maas, U.
2011. Verbrennung und Feuerungen: 25. Deutscher Flammentag. Fachtagung, Karlsruhe, 14.-15. September 2011, 659–666, VDI Fachmedien 

Untersuchungen zur chemischen Kinetik des Zerfalls von Fluoreszenztracern
Gushterova, I.; Hartmann, M.; Schießl, R.; Fikri, M.; Maas, U.; Schulz, C.
2011. Verbrennung und Feuerungen: 25. Deutscher Flammentag. Fachtagung, Karlsruhe, 14.-15. September 2011, 133–140, VDI Fachmedien 

Untersuchungen zur Fluoreszenz intermediärer Stoffe in Verbrennungsmotoren: Interferenz zu Tracer-LIF
Tröndle, P.; Schießl, R.; Maas, U.
2011. Motorische Verbrennung - aktuelle Probleme und moderne Lösungsansätze (X. Tagung). Tagung im Haus der Technik, München, 24./25. März 2011. Hrsg.: A. Leipertz, 267–278, ESYTEC 

PDF model for NO calculations with radiation and consistent NO-NO2 chemistry in non-premixed turbulent flames
Zoller, B. T.; Allegrini, J. M.; Maas, U.; Jenny, P.
2011. Combustion and Flame, 158 (8), 1591–1601. doi:10.1016/j.combustflame.2010.12.026 

Hierarchy System Analysis and Reduction of Reacting Flow Models
Bykov, V.; Maas, U.
2011. Computational Science and High Performance Computing IV - The 4th Russian-German Advanced Research Workshop, Freiburg, Germany, October 12 to 16, 2009. Ed.: E. Krause, 233–252, Springer-Verlag. doi:10.1007/978-3-642-17770-5_18 

On transformation to the singularly perturbed system
Bykov, V.
2011. Journal of physics / Conference Series, 268 (1), 012003/1–12. doi:10.1088/1742-6596/268/1/012003  

Auto-ignition of toluene-doped n-heptane and iso-octane/air mixtures: High-pressure shock-tube experiments and kinetics modeling
Hartmann, M.; Gushterova, I.; Fikri, M.; Schulz, C.; Schießl, R.; Maas, U.
2011. Combustion and Flame, 158 (1), 172–178. doi:10.1016/J.COMBUSTFLAME.2010.08.005 

Hybrid Rans/PDF calculations of a swirling bluff body flame (SM’1): Influence of the mixing model
De Meester, R.; Naud, B.; Maas, U.; Merci, B.
2011. Proceedings of the 7th Mediterranean Combustion Symposium (MCS’11), Sardinia, Italy, September 11-15, 2011, 1 CD-Rom, ICHMT 

Influence of Non-equilibrium Plasma on the Ignition Process due to Repetitive Streamer Discharges
Langer, T.; Markus, D.; Maas, U.
2011. 42nd AIAA Plasmadynamics and Lasers Conference 2011 in Conjunction with the 18th International Conference on MHD Energy Conversion, Honolulu, Hawaii, USA, June 27-30, 2011; Vol. 1, 318–331, Curran 

2D Mixture Fraction Studies in a Hot-Jet Ignition Configuration Using NO-LIF and Correlation Analysis
Sadanandan, R.; Schießl, R. A.; Markus, D.; Maas, U.
2011. Flow, Turbulence and Combustion, 86 (1), 45–62. doi:10.1007/s10494-010-9285-0 

Supercritical water gasification of real biomass feedstocks in continuous flow system
Madenoglu, T. G.; Boukis, N.; Saglam, M.; Yüksel, M.
2011. International Journal of Hydrogen Energy, 36, 14408–14415. doi:10.1016/j.ijhydene.2011.08.047 

A new method to measure small volumes in tritium handling facilities, using p-V measurements
Köllö, Z.; Alecu, C. G.; Moosmann, H.
2011. Fusion Science and Technology, 60, 972–975 

Wohn- und Siedlungsformen im West-Iran (Kordestan). PhD dissertation
Sedighi, M.
2011. Wasmuth 

The Plenhaptic Guidance Function for Intuitive Navigation in Extended Range Telepresence Scenarios
Perez Arias, A.; Eberhardt, H. P.; Pfaff, F.; Hanebeck, U. D.
2011. Proceedings of the IEEE World Haptics Conference (WHC 2011), Istanbul, Turkey, 21-24 June 2011, 475–480, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/WHC.2011.5945532  

Progressive Correction for Deterministic Dirac Mixture Approximations
Ruoff, P.; Krauthausen, P.; Hanebeck, U. D.
2011. Proceedings of the 14th International Conference on Information Fusion (Fusion 2011), Chicago, Illinois, USA, 5-8 July 2011, 8, Institute of Electrical and Electronics Engineers (IEEE)  

Analysis of Set-theoretic and Stochastic Models for Fusion under Unknown Correlations
Reinhardt, M.; Noack, B.; Baum, M.; Hanebeck, U. D.
2011. Proceedings of the 14th International Conference on Information Fusion (Fusion 2011), Chicago, Illinois, USA, 5-8 July 2011, 8 S., Institute of Electrical and Electronics Engineers (IEEE)  

Covariance Intersection in Nonlinear Estimation Based on Pseudo Gaussian Densities
Noack, B.; Baum, M.; Hanebeck, U. D.
2011. Proceedings of the 14th International Conference on Information Fusion (Fusion 2011), Chicago, Illinois, USA, 5-8 July 2011, 8 S  

Sparse Mixture Conditional Density Estimation by Superficial Regularization
Krauthausen, P.; Ruoff, P.; Hanebeck, U. D.
2011. Proceedings of the 14th International Conference on Information Fusion (Fusion 2011), Chicago, Illinois, USA, 5-8 July 2011, 8 S., Institute of Electrical and Electronics Engineers (IEEE)  

Automatic Exploitation of Independencies for Covariance Bounding in Fully Decentralized Estimation
Noack, B.; Baum, M.; Hanebeck, U. D.
2011. Proceedings of the 18th IFAC World Congress (IFAC 2011), August 2011, Università Cattolica del Sacro Cuore, Milano, Italy. Pt. 1. Ed.: E. Mosca, 6835–6841. doi:10.3182/20110828-6-IT-1002.03524  

(Semi-)Analytic Gaussian Mixture Filter
Huber, M. F.; Beutler, F.; Hanebeck, U. D.
2011. Proceedings of the 18th IFAC World Congress (IFAC 2011), Milan, Italy, August 28 - September 2, 2011. Pt. 1. Ed.: S. Bittanti, 1014–1020, Institute of Electrical and Electronics Engineers (IEEE). doi:10.3182/20110828-6-IT-1002.03359  

Using Extended Range Telepresence to Investigate Route Choice Behavior
Kretz, T.; Hengst, S.; Pérez Arias, A.; Friedberger, S.; Hanebeck, U. D.
2011. Proceedings of the Traffic and Granular Flow Conference 2011 (TGF 2011), Moscow, Russia, Sept. 2011  

Motion Control of a Semi-mobile Haptic Interface for Extended Range Telepresence
Pérez Arias, A.; Hanebeck, U. D.
2011. 2011 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS), 3053–3059, IEEE Computer Society. doi:10.1109/IROS.2011.6094998  

Combined Intention, Activity, and Motion Recognition for a Humanoid Household Robot
Gehrig, D.; Krauthausen, P.; Rybok, L.; Kühne, H.; Schultz, T.; Hanebeck, U. D.; Stiefelhagen, R.
2011. Proceedings of the International Conference on Intelligent Robots and Systems (IROS11), San Francisco, CA, USA, September 2011, 4819–4825, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/IROS.2011.6095118  

Fitting Conics to Noisy Data Using Stochastic Linearization
Baum, M.; Hanebeck, U. D.
2011. Proceedings of the 2011 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS 2011), San Francisco, California, USA, September 25-30, 2011, 2050–2055, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/IROS.2011.6094982  

Superficial Gaussian Mixture Reduction
Huber, M. F.; Krauthausen, P.; Hanebeck, U. D.
2011. Proceedings of the IEEE ISIF Workshop on Sensor Data Fusion: Trends, Solutions, Applications (SDF 2011), Berlin, Germany, 4. - 7.10.2011  

The KIT Robo-Kitchen Data set for the Evaluation of View-based Activity Recognition Systems
Rybok, L.; Friedberger, S.; Hanebeck, U. D.; Stiefelhagen, R.
2011. Proceedings of the 2011 11th IEEE-RAS International Conference on Humanoid Robots (Humanoids 2011), 26 - 28 October 2011, Bled, Slovenia, 128–133, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/Humanoids.2011.6100854  

Calibrating Dynamic Pedestrian Route Choice with an Extended Range Telepresence System
Kretz, T.; Hengst, S.; Roca, V.; Perez Arias, A.; Friedberger, S.; Hanebeck, U. D.
2011. Proceedings of the first IEEE Workshop on Modeling, Simulation and Visual Analysis of Large Crowds in conjunction with the 13th International Conference on Computer Vision (ICCV 2011), Barcelona, Spain, November, 2011, 166–172, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/ICCVW.2011.6130239  

An Experimental Evaluation of Position Estimation Methods for Person Localization in Wireless Sensor Networks
Schmid, J.; Beutler, F.; Noack, B.; Hanebeck, U. D.; Müller-Glaser, K. D.
2011. Wireless sensor networks. Proceedings of the 8th European Conference (EWSN 2011), Bonn, Germany, February 23 - 25, 2011. Ed.: P. J. Marrón, 147–162, Springer-Verlag. doi:10.1007/978-3-642-19186-2_10  

Nonlinear Information Filtering for Distributed Multisensor Data Fusion
Noack, B.; Lyons, D.; Nagel, M.; Hanebeck, U. D.
2011. Proceedings of the 2011 American Control Conference (ACC 2011), San Francisco, California, USA, June 29 2011-July 1 2011, 4846–4852, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/acc.2011.5991535  

Incorporating Prior Knowledge into Nonparametric Conditional Density Estimation
Krauthausen, P.; Roschani, M.; Hanebeck, U. D.
2011. Proceedings of the 2011 American Control Conference (ACC 2011), San Francisco, California, USA, June 29 2011-July 1 2011, 2450–2455, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/acc.2011.5991394  

Semi-Analytic Gaussian Assumed Density Filter
Huber, M. F.; Beutler, F.; Hanebeck, U. D.
2011. Proceedings of the 2011 American Control Conference (ACC 2011), San Francisco, California, USA, 29 June - 1 July 2011, 3006–3011, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/acc.2011.5991332  

Visual Stabilization of Beating Heart Motion by Model-based Transformation of Image Sequences
Bogatyrenko, E.; Hanebeck, U. D.
2011. Proceedings of the 2011 American Control Conference (ACC 2011), San Francisco, California, USA, June 29 2011-July 1 2011, 5432–5437, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/acc.2011.5991586  

Adaptive Model-Based Visual Stabilization of Image Sequences Using Feedback
Bogatyrenko, E.; Hanebeck, U. D.
2011. Proceedings of the 14th International Conference on Information Fusion (Fusion 2011), Chicago, Illinois, USA, July, 2011, 8 S., Institute of Electrical and Electronics Engineers (IEEE)  

Optimal Gaussian Filtering for Polynomial Systems Applied to Association-free Multi-Target Tracking
Baum, M.; Noack, B.; Beutler, F.; Itte, D.; Hanebeck, U. D.
2011. Proceedings of the 14th International Conference on Information Fusion (Fusion 2011), Chicago, Illinois, USA, July, 2011, 8 S., Institute of Electrical and Electronics Engineers (IEEE)  

Using Symmetric State Transformations for Multi-Target Tracking
Baum, M.; Hanebeck, U. D.
2011. Proceedings of the 14th International Conference on Information Fusion (Fusion 2011), Chicago, Illinois, USA, 5-8 July 2011, 8 S., Institute of Electrical and Electronics Engineers (IEEE)  

Shape Tracking of Extended Objects and Group Targets with Star-Convex RHMs
Baum, M.; Hanebeck, U. D.
2011. Proceedings of the 14th International Conference on Information Fusion (Fusion 2011), Chicago, Illinois, USA, July, 2011, 8 S., Institute of Electrical and Electronics Engineers (IEEE)  

Stochastic Nonlinear Model Predictive Control with Guaranteed Error Bounds Using Compactly Supported Wavelets
Hekler, A.; Kiefel, M.; Hanebeck, U. D.
2011. Proceedings of the 50th IEEE Conference on Decision and Control (CDC 2011), Orlando, Florida, USA, 12-15 Dec. 2011, 7697–7702, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/CDC.2011.6161423  

Mixture Random Hypersurface Models for tracking multiple extended objects
Baum, M.; Noack, B.; Hanebeck, U. D.
2011. Proceedings of the 50th IEEE Conference on Decision and Control (CDC 2011), Orlando, Florida, USA, December 12-15, 2011, 3166–3171. doi:10.1109/CDC.2011.6161522  

Ein neues Konzept zum gezielten Abtrag von Stahlbetonstrukturen
Reinhardt, S.; Gentes, S.; Weidemann, R.; Geimer, M.; Heise, C.; Edelmann, T.
2011. Jahrestagung Kerntechnik 2011 : Berlin, 17. - 19. Mai 2011 [Proceedings], INFORUM Verl  

Erdbebenbemessung von Tanks - Erfahrungen aus der Praxis
Knödel, P.; Heß, A.
2011. Stahlbau, 80 (11), 820–827 

Capacity Reserves in the Global Buckling Analysis of Steel Columns
Knödel, P.; Müller, A.; Hafner, M.; Abul Ola, A.
2011. Taller, Longer, Lighter - IABSE-IASS 2011 London Symposium Report, September 20-23, 2011, Hemming Group 

On the Dynamics of Steel Structures with X-Type Bracing
Knödel, P.
2011. Stahlbau, 80 (8), 566–571. doi:10.1002/stab.201101457 

Stability of a Thin-Walled Silo Hopper - Case Study
Knödel, P.
2011. Thermal forming and welding distortion : proceedings of the IWOTE’11: International Workshop on Thermal Forming and Welding Distortion, Bremen, Germany, April 06 - 07, 2011. Ed.: F. Vollertsen, 353–375, Verlag BIAS 

Internal load transfer in a metal matrix composite with a three-dimensional interpenetrating structure
Roy, S.; Gibmeier, J.; Kostov, V.; Weidenmann, K. A.; Nagel, A.; Wanner, A.
2011. Acta Materialia, 59 (4), 1424–1435. doi:10.1016/j.actamat.2010.11.004 

Metallographische Charakterisierung metallischer Gläser
Rögner, J.; Ohl, A.; Gibmeier, J.; Schulze, V.; Kerscher, E.
2011. Fortschritte in der Metallographie. Vortragstexte der 45. Metallographie-Tagung, Karlsruhe, 14.-16. September 2011. Hrsg.: A. Wanner, 37–42, Deutsche Gesellschaft für Materialkunde e.V. (DGM) 

Minimization of spurious strains by using a Si bent-perfect-crystal monochromator: neutron surface strain scanning of a shot-peened sample
Rebelo-Kornmeier, J.; Gibmeier, J.; Hofmann, M.
2011. Measurement Science and Technology, 22 (6), 065705/1–9. doi:10.1088/0957-0233/22/6/065705 

Neutron surface residual stress scanning using optimisation of a Si-bent perfect crystal monochromator for minimising spurious strains
Rebelo-Kornmeier, J.; Gibmeier, J.; Hofmann, M.; Wimpory, R. C.
2011. Materials Science Forum, 681, 399–404. doi:10.4028/www.scientific.net/MSF.681.399 

EDXRD for real time observation of a gas tungsten arc welding process
Altenkirch, J.; Gibmeier, J.; Buslaps, T.; Honkimäki, V.
2011. Materials Science Forum, 706-709, 1655–1660. doi:10.4028/www.scientific.net/MSF.706-709.1655 

A combined approach to microstructure mapping of an Al-Li AA2199 friction stir weld
Steuwer, A.; Dumont, M.; Altenkirch, J.; Birosca, S.; Deschamps, A.; Prangnell, P. B.; Withers, P. J.
2011. Acta Materialia, 59 (8), 3002–3011. doi:10.1016/j.actamat.2011.01.040 

Boundaries for Increasing of Fatigue Limit of Bearing Steel SAE 52100 by Thermomechanical Treatments
Kerscher, E.; Lang, K.-H.; Löhe, D.
2011. Procedia Engineering, 10, 1985–1990. doi:10.1016/j.proeng.2011.04.329 

Influence of Microstructure on the Quasistatic and Low Cycle Fatigue Behaviour of an AA2618 Aluminium Alloy
Khalil, O.; Lang, K.-H.
2011. Procedia Engineering, 10, 1339–1347. doi:10.1016/j.proeng.2011.04.223 

Lebensdauervorhersage von Verdichterrädern
Hartrott, P. von; Schweizer, C.; Khalil, O.; Lang, K.-H.
2011. Motortechnische Zeitschrift, 72 (4), 316–321. doi:10.1365/s35146-011-0075-6 

Microstructure and mechanical properties of micro tensile specimens made of CuAl10Ni5Fe4 produced by micro casting
Rögner, J.; Lang, K.-H.; Baumeister, G.; Schulze, V.
2011. Microsystem Technologies, 17 (2), 301–311. doi:10.1007/s00542-011-1234-x 

Influence of the surface constitution on the as-sintered strength of Si₃N₄ micro specimens
Müller, M.; Rögner, J.; Bauer, W.; Knitter, R.
2011. Materials Science and Engineering A, 528 (27), 7895–7900. doi:10.1016/j.msea.2011.06.081 

Bestimmung des Porositätstiefenverlaufes festgewalzter pulvertmetallurgisch hergestellter Proben aus Astaloy 85 Mo
Nusskern, P.; Ohl, A.; Hoffmeister, J.; Schulze, V.
2011. Fortschritte in der Metallographie, Vortragstexte der 45. Metallographie-Tagung, Karlsruhe, 14.-16. September 2011. Hrsg.: A. Wanner, 227–232, MAT INFO Werkstoff-Informationsgesellschaft mbH 

Data acquisition for numerical modelling of induction surface hardening - process specific considerations
Schwenk, M.; Strauss, T.; Hoffmeister, J.; Schulze, V.
2011. Heat treating 2011: Proceedings of the 26th ASM Heat Treating Society Conference, 2011, Cincinnati, Ohio, USA, October 31-November 2. Ed.: B. L. Ferguson, 167–176, ASM International 

Numerical modelling of induction surface hardening and its contribution to distortionreduction
Schwenk, M.; Strauss, T.; Hoffmeister, J.; Schulze, V.
2011. Proceedings / 3rd International Conference on Distortion Engineering 2011, Bremen, Germany, September 14-16, 2011. Ed.: H.-W. Zoch, 315–322, IWT 

Effects of the Surface Treatment on the Measured Diffraction Peak Width of Inconel 718
Hoffmeister, J.; Schulze, V.; Hessert, R.; Koenig, G.
2011. Proceedings of the Eleventh International Conference on Shot Peening (ICSP 11), South Bend, Indiana, USA, September 12-15, 2011. Ed.: J. Champaigne, 201–206, International Committee on Shot Peening 

Residual Stress Relaxation Induced by Shot Peening in Inconel718 Under Quasistatic and Cyclic Loading
Hoffmeister, J.; Schulze, V.; Hessert, R.; Koenig, G.
2011. Proceedings of the Eleventh International Conference on Shot Peening (ICSP 11), South Bend, Indiana, USA, September 12-15, 2011. Ed.: J. Champaigne, 225–230, International Committee on Shot Peening 

Characterization of the transition from ploughing to cutting in micro machining and evaluation of the minimum thickness of cut
Cuba Ramos, A.; Autenrieth, H.; Strauß, T.; Deuchert, M.; Hoffmeister, J.; Schulze, V.
2011. Journal of Materials Processing Technology, 212 (3), 594–600. doi:10.1016/j.jmatprotec.2011.07.007 

Eigenschaftsänderungen bei metallischen Leichtbauwerkstoffen
Henning, F.; Weidenmann, K. A.; Bader, B.
2011. Handbuch Leichtbau: Methoden, Werkstoffe, Fertigung. Hrsg.: F. Henning, 555–575, Carl Hanser Verlag 

Fertigungsrouten zur Herstellung von Hybridverbunden
Henning, F.; Weidenmann, K. A.; Bader, B.
2011. Handbuch Leichtbau: Methoden, Werkstoffe, Fertigung. Hrsg.: F. Henning, 723–740, Carl Hanser Verlag 

Hybride Werkstoffverbunde
Henning, F.; Weidenmann, K. A.; Bader, B.
2011. Handbuch Leichtbau: Methoden, Werkstoffe, Fertigung. Hrsg.: F. Henning, 413–428, Carl Hanser Verlag 

Werkstoffauswahl für den Leichtbau
Weidenmann, K. A.; Wanner, A.
2011. Handbuch Leichtbau: Methoden, Werkstoffe, Fertigung. Hrsg.: F. Henning, 161–190, Carl Hanser Verlag 

Präparations- und Ätzmethodik zur lichtmikroskopischen Analyse von Strangpressnähten und Gefügekontrastierung für die Aluminiumlegierungen EN AW-6063 und EN AW-6082
Reeb, A.; Ohl, A.; Poser, K.; Kloppenborg, T.; Brosius, A.; Tekkaya, A. E.; Weidenmann, K. A.
2011. Fortschritte in der Metallographie. Vortragstexte der 45. Metallographie-Tagung, Karlsruhe, 14.-16. September 2011. Hrsg.: A. Wanner, 31–36, MAT INFO Werkstoff-Informationsgesellschaft mbH 

Effects of fluid condition and material on surface damage in ultrasonic wet peening
Weingärtner, R.; Kienzler, A.; Hoffmeister, J.; Schulze, V.
2011. Proceedings of the Eleventh International Conference on Shot Peening (ICSP 11), South Bend, Indiana, USA, September 12-15, 2011. Ed.: J. Champaigne, 399–404, International Committee on Shot Peening 

Struktur-Eigenschaft-Beziehungen von Fügezonen
Hammers, T.; Weidenmann, K. A.; Schulze, V.
2011. Integration von Umformen, Trennen und Fügen für die flexible Fertigung von leichten Tragwerkstrukturen. Hrsg.: A. E. Tekkaya, 143–167, VDI Verlag 

Werkstoffkundliche Charakterisierung verbundstranggepresster Leichtmetallmatrix-Verbundwerkstoffe
Merzkirch, M.; Weidenmann, K. A.; Schulze, V.
2011. Integration von Umformen, Trennen und Fügen für die flexible Fertigung von leichten Tragwerkstrukturen. Hrsg.: A. E. Tekkaya, 49–72, VDI Verlag 

Time- and temperature-resolved synchrotron X-ray diffraction: observation of phase transformation and strain evolution in novel low temperature transformation weld filler materials
Altenkirch, J.; Gibmeier, J.; Kostov, V.; Kromm, A.; Kannengiesser, T.; Doyle, S.; Wanner, A.
2011. The journal of strain analysis for engineering design, 46 (7), 563–579. doi:10.1177/0309324711413190 

Comparison of methods to determine variations in unstrained unit cell parameter across welds
Altenkirch, J.; Peel, M. J.; Steuwer, A.; Withers, P. J.
2011. Journal of Strain Analysis for Engineering Design, 46 (7), 651–662. doi:10.1177/0959651811414643 

Untersuchung des Einflusses verschiedener Prozessbedingungen, Fasergewichtsanteile und Faserlängen auf die Faserorientierung im Polyurethan Fasersprühprozess
Kuppinger, J.; Wafzig, F.; Henning, F.; Weidenmann, K. A.; Haspel, B.; Elsner, P.
2011. Zeitschrift Kunststofftechnik / Journal of Plastics Technology, 7 (2), 45–65 

Investigations on the Cyclic Crack Growth Behaviour of Spring Steel Wire Reinforced EN AW-6082
Merzkirch, M.; Weidenmann, K. A.; Schulze, V.
2011. EPD Congress 2011. Ed.: S. N. Monteiro, 135–142, John Wiley and Sons. doi:10.1002/9781118495285.ch17 

Charakterisierung des Compression RTM Prozesses zur Produktion von endlosfaserverstärkten Verbundwerkstoffen
Haspel, B.; Chaudhari, R.; Weidenmann, K. A.; Henning, F.; Elsner, P.
2011. Tagungsband zum 18. Symposium Verbundwerkstoffe und Werkstoffverbunde - Chemnitz, 30.03. bis 01.04.2011. Hrsg.: B. Wielage, 227–232, TU Chemnitz