Stiffening of sheet-metal with failure-free bead patterns
Albers, A.; Majic, N.; Krönauer, B.; Hoffmann, H.
2012. Proceedings of the ASME 2010 International Mechanical Engineering Congress and Exposition, Vancouver, British Columbia, Canada, November 12-18, 2010. Vol. 3: Design and manufacturing. Pt. B, 875–883, The American Society of Mechanical Engineers (ASME) 

A new process for configuration and application of complex validation environments using the example of vehicle-in-the-loop at the roller test bench
Albers, A.; Düser, T.
2012. Proceedings of the ASME 2010 International Mechanical Engineering Congress and Exposition, Vancouver, British Columbia, Canada, November 12-18, 2010. Vol. 11: New Developments in Simulation Methods and Software for Engineering Applications; Safety Engineering, Risk Analysis and Reliability Methods; Transportation Systems, 807–816, The American Society of Mechanical Engineers (ASME) 

Mechanismen zur verteilten Selbstorganisation von adaptiver Hardware. PhD dissertation
Schuck, C.
2012. Karlsruher Institut für Technologie (KIT) 

Fluoro-substituted prolines as structural labels for solid state ¹⁹F-NMR of polypeptides. PhD dissertation
Kubyshkin, V.
2012. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000035370  

Utilisation de planchers en briques creuses
Voormann, F.
2012. L’architrave, le plancher, la plate-forme : Nouvelle histoire de la construction. Ed.: R. Gargiani, 537–543, Presses polytechniques et universitaires romandes 

Early Iron Bridge Construction for the Grand Duchy of Baden and for Central Europe
Voormann, F.; Trautz, M.
2012. Nuts & Bolts of Construction History : Culture, Technology and Society. Proceedings of the Fourth International Congress on Construction History, 3 July to 7 July 2012, Paris. Vol. 1. Ed.: R. Carvais, 419–428, Picard 

Rezension zu: Hassler, U.; Rauhut, Chr. (Hrsg.) in Zusammenarbeit mit S. Huerta: Bautechnik des Historismus. Von den Theorien über gotische Konstruktionen bis zu den Baustellen des 19. Jahrhunderts. München : Hirmer Verlag, 2012
Voormann, F.
2012. Stahlbau, 81 (10), 816–817, Wiley-VCH Verlag 

On the significance of viscoelasticity in a 2D full waveform inversion of shallow seismic surface waves
Groos, L.; Schäfer, M.; Forbriger, T.; Bohlen, T.
2012. 74th EAGE conference and exhibition incorporating SPE EUROPEC 2012, Copenhagen, Denmark, 4 - 7 June 2012; Vol. 2, 950–954, Curran. doi:10.3997/2214-4609.20148165  

Methoden zur magnetischen Steuerung schwimmender Endoroboter. PhD dissertation
Keller, H.
2012. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000035357  

Retention capacity of ceramic membranes on water cntaining various pathogen bacteria
Matthies, K.
2012. Disinfection of Water, Waste Water and Biosolids Conference, Mexico City, MEX, Novermber 25-29, 2012 

Sensible water quality of karst regions in emerging countries - appropriate and sustainable water treatment
Matthies, K.; Brändle, K.; Obst, U.
2012. Internat.Conf.on Integrated Water Resources Management, Karlsruhe, November 21-22, 2012 

Sensible water quality of karst regions in emerging countries - appropriate and sustainable water treatment
Matthies, K.; Brändle, K.; Obst, U.
2012. Integrated Water Resources Management : International Conference, Karlsruhe, 21 - 22 November 2012. Ed.: H. Seusloff, Fraunhofer Verlag 

Enzymatische Tests für die Wasseranalytik
Obst, U.; Schwartz, T.; Brenner-Weiss, G.
2012. München : Oldenbourg-Industrieverl., 2012 (Edition GWF : Wasser, Abwasser) 

Organische Fotodioden und deren Ankopplung an mikrooptische Systeme. PhD dissertation
Valouch, S.
2012. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000035349  

Cloud-resolving scale: The challenges and the added values
Fosser, G.; Berg, P.; Khodayar, S.; Schädler, G.
2012. 12th European Meteorological Society Annual Meeting and 9th European Conference on Applied Climatology (ECAC), Lodz, PL, September 10-14, 2012 

The role of damping for the driven anharmonic quantum oscillator
Guo, L.; Marthaler, M.; Andre, S.; Schön, G.
2012. Journal of physics / Conference Series, 400 (4), 042014/1–4. doi:10.1088/1742-6596/400/4/042014  

Lasing and transport in a coupled quantum dot-resonator system
Jin, P.-Q.; Marthaler, M.; Cole, J. H.; Shnirman, A.; Schön, G.
2012. Physica Scripta, 2012 (T151), 014032/1–6. doi:10.1088/0031-8949/2012/T151/014032 

Efficient quantum simulations of metals within the T-point approximation: Application to carbon and inorganic 1D and 2D materials
Ghorbani-Asl, M.; Juarez-Mosqueda, R.; Kuc, A.; Heine, T.
2012. Journal of Chemical Theory and Computation, 8 (8), 2888–2895. doi:10.1021/ct3003496 

Quantum vortex dynamics in Josephson arrays and optical lattices
Fazio, R.; Schön, G.
2012. Annalen der Physik, 524 (3-4), 113–117. doi:10.1002/andp.201100279 

Numerical Study on Spin Torque Switching in Thermally Activated Region
Taniguchi, T.; Shibata, M.; Marthaler, M.; Utsumi, Y.; Imamura, H.
2012. Applied Physics Express, 5 (6), 063009/1–3. doi:10.1143/APEX.5.063009 

Memory effects in electrochemically gated metallic point contacts
Maul, R.; Xie, F.-Q.; Obermair, C.; Schön, G.; Schimmel, T.; Wenzel, W.
2012. Applied Physics Letters, 100 (20), 203511/1–5. doi:10.1063/1.4719207  

Dual-probe decoherence microscopy: Probing pockets of coherence in a decohering environment
Marthaler, M.; Schön, G.; Jeske, J.; Cole, J. H.; Müller, C.
2012. New Journal of Physics, 14 (2), 023013/1–26. doi:10.1088/1367-2630/14/2/023013  

Ab initio study of the thermopower of biphenyl-based single-molecule junctions
Bürkle, M.; Zotti, L. A.; Viljas, J. K.; Vonlanthen, D.; Mishchenko, A.; Wandlowski, T.; Mayor, M.; Schön, G.; Pauly, F.
2012. Physical review / B, 86 (11), Art.Nr. 115304/1–8. doi:10.1103/PhysRevB.86.115304 

Work fluctuation theorem for a classical circuit coupled to a quantum conductor
Utsumi, Y.; Golubev, D. S.; Marthaler, M.; Schön, G.; Kobayashi, K.
2012. Physical Review B, 86 (7), 075420/1–8. doi:10.1103/PhysRevB.86.075420 

Effect of spin fluctuations on the electronic structure in iron based superconductors
Heimes, A.; Grein, R.; Eschrig, M.
2012. Physical Review B, 86 (6), 064528/1–19. doi:10.1103/PhysRevB.86.064528 

Pure dephasing in flux qubits due to flux noise with spectral density scaling as 1/fα
Anton, S. M.; Birenbaum, J. S.; Fefferman, A. D.; Hilton, G. C.; Cho, H.-M.; Irwin, K. D.; Wellstood, F. C.; Clarke, J.; Schön, G.; Müller, C.; Shnirman, A.; Golubev, D. S.
2012. Physical review / B, 85 (22), 224505/1–6. doi:10.1103/PhysRevB.85.224505 

Theoretical study of the charge transport through C60-based single-molecule junctions
Bilan, S.; Zotti, L. A.; Pauly, F.; Cuevas, J. C.
2012. Physical Review B, 85 (20), 205403/1–9. doi:10.1103/PhysRevB.85.205403 

Coherent control of Floquet-mode dressed plasmon polaritons
Frank, R.
2012. Physical Review B, 85 (19), 195463/1–5. doi:10.1103/PhysRevB.85.195463 

Influence of two-level fluctuators on adiabatic passage techniques
Vogt, N.; Cole, J. H.; Marthaler, M.; Schön, G.
2012. Physical Review B, 85 (17), 174515/1–8. doi:10.1103/PhysRevB.85.174515 

Fragility of flux qubits against quasiparticle tunneling
Leppäkangas, J.; Marthaler, M.
2012. Physical Review B, 85 (14), 144503/1–13. doi:10.1103/PhysRevB.85.144503 

Conduction mechanisms in biphenyl dithiol single-molecule junctions
Bürkle, M.; Viljas, J. K.; Vonlanthen, D.; Mishchenko, A.; Schön, G.; Mayor, M.; Wandlowski, T.; Pauly, F.
2012. Physical review / B, 85 (7), Art.Nr. 076417. doi:10.1103/PhysRevB.85.075417 

Emission spectrum of the driven nonlinear oscillator
Andre, S.; Guo, L.; Peano, V.; Marthaler, M.; Schön, G.
2012. Physical Review A, 85 (5), 053825/1–7. doi:10.1103/PhysRevA.85.053825 

Charge Transport Characteristics of Diarylethene Photoswitching Single-Molecule Junctions
Kim, Y.; Hellmutz, T. J.; Sysoiev, D.; Pauly, F.; Pietsch, T.; Wolf, J.; Erbe, A.; Huhn, T.; Groth, U.; Steiner, U. E.; Scheer, E.
2012. Nano Letters, 12 (7), 3736–3742. doi:10.1021/nl3015523 

Irreversibility on the Level of Single-Electron Tunneling
Küng, B.; Rössler, C.; Beck, M.; Marthaler, M.; Golubev, D. S.; Utsumi, Y.; Ihn, T.; Ensslin, K.
2012. Physical Review X, 2 (1), 011001/1–6. doi:10.1103/PhysRevX.2.011001  

Sharp Tunneling Peaks in a Parametric Oscillator: Quantum Resonances Missing in the Rotating Wave Approximation
Peano, V.; Marthaler, M.; Dykman, M. I.
2012. Physical Review Letters, 109 (9), 090401/1–5. doi:10.1103/PhysRevLett.109.090401 

Strong Coupling of Spin Qubits to a Transmission Line Resonator
Jin, P.-Q.; Marthaler, M.; Shnirman, A.; Schön, G.
2012. Physical Review Letters, 108 (19), 190506/1–5. doi:10.1103/PhysRevLett.108.190506 

Co-tunneling Enhancement of the Electrical Response of Nanoparticle Networks
Pauly, M.; Dayen, J.-F.; Golubev, D.; Beaufrand, J.-B.; Pichon, B. P.; Doudin, B.; Begin-Colin, S.
2012. Small, 8 (1), 108–115. doi:10.1002/smll.201100931 

Properties of Interfaces and Surfaces in Non-centrosymmetric Superconductors
Eschrig, M.; Iniotakis, C.; Tanaka, S.
2012. Non-centrosymmetric Superconductivity: Introduction and Overview. Ed.: E. Bauer, 313–357, Springer-Verlag. doi:10.1007/978-3-642-24624-1_11 

Ein neues Konzept zur Modellierung und Regelung von dynamischen Transportvorgängen in der industriellen Robotik in Echtzeit. PhD dissertation
August, W.
2012. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000035283  

Investigation into the Feasibility of an Onboard Weight and Balance System for Rotary Wing Aircraft with Wheeled Landing Gear
Zingel, C.; Albers, A.; Matthiesen, S.; Maletz, M.
2012. IAENG international journal of computer science, 39 (2), 165–181 

Investigation into the Feasibility of an Onboard Weight and Balance System for Rotary Wing Aircraft with Wheeled Landing Gear
Schneider, P.; Thräne, K.; Wenzl, J.; Matthiesen, S.
2012. 71st International Conference on Mass Properties 2012, Bavaria, Germany, May 5 -10, 2012, 465–494, Curran 

Indoor Pass-by noise testing on a roller test bench in a small anechoic chamber with an isotropic source
Robens, G.; Albert, A.; Behrendt, M.
2012. INTER-NOISE 2012: Proceedings of the 41st International Congress and Exposition on Noise Control Engineering, New York City, USA, August 19-22, 2012. Ed.: C. Burroughs, 1 DVD, Institute of Noise Control Engineering of the USA (INCE-USA) 

Acoustic Emission Analysis in the Early Stage of Heavy Duty Hydrodynamic - Hydrostatic Hybrid Pod Drive Bearing Development
Nguyen, H. T.; Gold, S.; Weber, J.; Albers, A.
2012. CM 2012/MFPT 2012: Proceedings of the 9th International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, London, UK, 12-14 June 2012, 1 CD-Rom, The British Institute of NT 

New insights on the contact&channel-approach - Modelling of systems with several logical states
Matthiesen S.; Ruckpaul A.
2012. DESIGN 2012: Proceedings of the 12th International Design Conference, Dubrovnik, Croatia, May 21-24, 2012. Ed.: D. Marjanovic, 1019–1028, The Design Society 

Supporting validation in the developement of Design methods
Marxen L.; Albers A.
2012. DESIGN 2012: Proceedings of the 12th International Design Conference, Dubrovnik, Croatia, May 21-24, 2012. Ed.: D. Marjanovic, 1009–1018, The Design Society 

CFK-Felge wiegt nur 1,5 kg
Majic, N.; Roquette, D.; Hauck, A.; Tellen, P.; Moser, A.
2012. Industrie-Anzeiger, (27.08.2012) 

Synthese zweier Bauweisen Auslegung eines Chassis in Mischbauweise
Majic, N.; Epperlein, L.; Grasmannsdorf, J.
2012. ATZ extra, 17 (8), 44–53. doi:10.1365/s35778-012-0783-7 

Dynamic behaviour and sealing performance of piston rings used in squeeze-film-dampers
Jäger, S.; Bruchmüller, T.; Albers, A.
2012. Sealing Technology, 2012 (11), 9–13. doi:10.1016/S1350-4789(12)70485-3 

Optimierung der Schallabstrahlung von Gehäusestrukturen
Hessenauer, B.; Albers, A.; Ott, S.
2012. Maschinenakustik 2012: Wettbewerbsvorteil durch geräuscharme Produkte. 5. VDI-Fachtagung, Karlsruhe, 13. und 14. November 2012, 43–53, VDI Verlag 

Variations in functional decomposition for an existing
Eckert, C.; Ruckpaul, A.; Alink, T.; Albers, A.
2012. SME Verification and Validation Symposium ((V&V2012)), Las Vegas, Nevada, May 2-4, 2012, 1 CD-Rom, The American Society of Mechanical Engineers (ASME) 

Variations in functional decomposition for an existing product: Experimental results
Eckert, C.; Ruckpaul, A.; Alink, T.; Albers, A.
2012. AI EDAM - Artificial Intelligence for Engineering Design, Analysis and Manufacturing, 26 (2), 107–128. doi:10.1017/S0890060412000029 

A method for developing specific reference cycles or alternatively test cases for commercial vehicles and their auxiliary systems
Brezger, F.; Albert, A.
2012. SAE 2012 Commercial Vehicle Engineering Congress, Rosemont, Illinois, United States, October 2, 2012, paper 2012–01, SAE International. doi:10.4271/2012-01-2026 

Produktentstehung - ein mentales Modell
Albers, A.; Marxen, L.
2012. Innovation Excellence: wie Unternehmen ihre Innovationsfähigkeit systematisch steigern. Hrsg.: I. Serhan, 307–328, Symposion Publishing 

Hybrid Reinforcement Learning-based approach for agent motion control
Albers, A.; Obando, H. S.; Gudematsch, C.
2012. 2012 IEEE International Conference on Industrial Technology (ICIT 2012), Athens, Greece, March 19 - 21, 2012, 160–165, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/ICIT.2012.6209931 

Improving Hands-On Education by Introducing a Mechanical Components Model Suitcase
Albers, A.; Nguyen, H. T.; Burkardt, N.
2012. International Conference on Engineering Education 2012 - Abstract Book, Turku, Finland, July 30 - August 3, 2012. Ed.: J. Björkqvist, 36, Turku University of Applied Sciences 

Steigerung der Energieeffizienz stationär belasteter hydrodynamischer Gleitlager durch aktive Regelung des Schmiermitteldurchflusses und Condition Monitoring mittels Körperschallanalyse
Albers, A.; Nguyen, H. T.; Burger, W.
2012. Tribologie und Schmierungstechnik, 59 (3), 5–8 

Energy-efficient hydrodynamic journal bearings by means of condition monitoring and lubrication flow control
Albers, A.; Nguyen, H. T.; Burger, W.
2012. International Journal of Condition Monitoring, 2 (1), 18–21. doi:10.1784/204764212800028860 

Influence of micro textures on the tribological contact and tribological behavior on the example of a CVT
Albers, A.; Drechsler, S.; Merkel, P.
2012. Proceedings of the ASME/STLE International Joint Tribology Conference - 2012 : presented at ASME/STLE 2012 International Joint Tribology Conference, October 7 - 10, 2012, Denver, Colorado, USA, 247–250, The American Society of Mechanical Engineers (ASME) 

The dilemma of managing iterations in time-to-market development processes
Meboldt, M.; Matthiesen, S.; Lohmeyer, Q.
2012. Proceedings of the 2nd International Workshop on Modelling and Management Engineering Processes, Cambridge, United Kingdom, November 29-30, 2012. Ed.: P. Heisig, Cambridge 

Integrated Modelling of Information to Support Product Engineering Processes
Albers, A.; Braun, A.; Pinner, T.
2012. Proceedings of the 2nd International Workshop on Modelling and Management Engineering Processes, Cambridge, United Kingdom, November 29-30, 2012. Ed.: P. Heisig, Cambridge 

Faszination Konstruktion : Berufsbild und Tätigkeitsfeld im Wandel
Albers, A.; Denkena, B.
2012. (S. Matthiesen, Ed.), Springer-Verlag 

Modelling and simulation of the hand-arm-system during impact influences
Matthiesen, S.; Schaefer, T.; Mangold, S.
2012. International Mechanical Engineering Congress and Exposition (IMECE2012), Houston, Texas, November 9-15, 2012, 1 CD-Rom, The American Society of Mechanical Engineers (ASME) 

Time-efficient method for test-based optimization of technical systems using physical models
Albers, A.; Schwarz, A.; Behrendt, M.; Hettel, R.
2012. International Mechanical Engineering Congress and Exposition (IMECE2012), Houston, Texas, November 9-15, 2012, 1 CD-Rom, The American Society of Mechanical Engineers (ASME) 

Automatische Identifizierung und Analyse von NVH Phänomenen im Fahrzeug auf dem Rollenprüfstand
Albers, A.; Schwarz, A.; Hettel, R.; Behrendt, M.
2012. Fortschritte der Akustik: DAGA 2012. Tagungsband der 38. Jahrestagung für Akustik, Darmstadt, 19. - 22. März 2012. Hrsg.: H. Hanselka, 1 CD-Rom, Dt. Ges. für Akustik 

Modellierung und Simulation des Hand-Arm-Systems bei stoßartiger Anregung
Matthiesen, S.; Mangold, S.; Schäfer, T.
2012. Design for X: Beiträge zum 23. DfX-Symposium Oktober 2012. Hrsg.: D. Krause, 113–124, TuTech Verl 

Zielsystemorientiertes Variantenmanagement einbaufertiger Systembaugruppen
Albers, A.; Walch, M.; Lohmeyer, Q.
2012. Design for X: Beiträge zum 23. DfX-Symposium Oktober 2012. Hrsg.: D. Krause, 187–198, Tutech Verlag 

Establishing CAD and PDM as part of engineering education in large classes for undergraduate students
Geier, M.; Jäger, S.; Maier, T.; Albers, A.
2012. Design education for future wellbeing: Proceedings of the 14th International Conference on Engineering and Product Design Education, Antwerp, Belgium, September 6-7, 2012. Ed.: L. Buck, 41–46, The Design Society 

Transfer of engineering experience by shared mental models
Albers, A.; Turki, T.; Lohmeyer, Q.
2012. Design education for future wellbeing: Proceedings of the 14th International Conference on Engineering and Product Design Education, Antwerp, Belgium, September 6-7, 2012. Ed.: L. Buck, 77–82, The Design Society 

Assessment of design competencies by a five level model of expertise
Albers, A.; Turki, T.; Lohmeyer, Q.
2012. Design education for future wellbeing: Proceedings of the 14th International Conference on Engineering and Product Design Education, Antwerp, Belgium, September 6-7, 2012. Ed.: L. Buck, 305–310, The Design Society 

Potentiale einer funktionsorientierten Lenkung mechatronischer Produkte in der Automobilindustrie
Denger, A.; Fritz, J.; Kissel, M.; Parvan, M.; Zingel, C.
2012. Tag des Systems Engineering: Zusammenhänge erkennen und gestalten, Paderborn, 7. - 9. November 2012. Hrsg.: M. Maurer, 405–414, Carl Hanser Verlag 

Individuelle und organisatorische Akzeptanz von Methoden des Systems Engineering
Albers, A.; Lohmeyer, Q.; Radimersky, A.
2012. Tag des Systems Engineering: Zusammenhänge erkennen und gestalten, Paderborn, 7. - 9. November 2012. Hrsg.: M. Maurer, 351–362, Carl Hanser Verlag 

An Ontology-Representation of the Integrated Product Engineering Model
Albers, A.; Braun, A.; Schmalenbach, H.
2012. Gain competitive advantage by managing complexity: Proceedings of the 14th International DSM Conference, Kyoto, Japan, 2012. Ed.: M. Onishi, 357–369, Carl Hanser Verlag 

Integrated Modelling of Product- and Process-Related Information
Albers, A.; Braun, A.; Salomon, S.
2012. Gain competitive advantage by managing complexity: Proceedings of the 14th International DSM Conference, Kyoto, Japan, 2012. Ed.: M. Onishi, 239–251, Carl Hanser Verlag 

Dependency structure matrix modelling for human resource allocation
Albers, A.; Breitschuh, J.; Lohmeyer, Q.
2012. Gain competitive advantage by managing complexity: Proceedings of the 14th International DSM Conference, Kyoto, Japan, 2012. Ed.: M. Onishi, 371–383, Carl Hanser Verlag 

Modeling and Validation of a back-torque limiter using the example of a BMW motorcycle power train
Albers, A.; Merkel, P.; Geier, M.; Dreher, I.; Staedele, H.
2012. Development trends of motorcycles IV: 5th International Conference "Development Trends of Motorcycles". Ed.: C. Stan, 6/1–15, expert-Verlag 

Advanced Systems Engineering - Forschung an einer innovativen Produktentwicklungssystematik
Albers, A.; Zingel, C.; Behrendt, M.
2012. Konstruktion, 2012 (11-12), 69–70 

Tools and methods of competitive engineering: Proceedings of the ninth International Symposium on Tools and Methods of Competitive Engineering (TMCE 2012), Karlsruhe, Germany, May 7-11, 2012
Horváth, I.; Rusák, Z.; Albers, A.
2012. (M. Behrendt, Ed.), Delft University of Technology (TU Delft) 

Ontology-grounded test facility requirements definition
El-Haji, M.; Freudenmann, T.; Albers, A.; Gauterin, F.
2012. Tools and methods of competitive engineering: Proceedings of the ninth International Symposium on Tools and Methods of Competitive Engineering (TMCE 2012), Karlsruhe, Germany, May 7-11, 2012. Ed.: I. Horváth, 1113–1124, Delft University of Technology (TU Delft) 

Improving access to micro-specific knowledge with an ontology
Albers, A.; Turki, T.; Schmalenbach, H.
2012. Tools and methods of competitive engineering: Proceedings of the ninth International Symposium on Tools and Methods of Competitive Engineering (TMCE 2012), Karlsruhe, Germany, May 7-11, 2012. Ed.: I. Horváth, 465–476, Delft University of Technology (TU Delft) 

Towards handling complexity - Testing the IPEM process modeling approach
Albers, A.; Braun, A.
2012. Tools and methods of competitive engineering: Proceedings of the ninth International Symposium on Tools and Methods of Competitive Engineering (TMCE 2012), Karlsruhe, Germany, May 7-11, 2012. Ed.: I. Horváth, 293–304, Delft University of Technology (TU Delft) 

Systems of objectives in complex product development
Albers, A.; Ebel, B.; Lohmeyer, Q.
2012. Tools and methods of competitive engineering: Proceedings of the ninth International Symposium on Tools and Methods of Competitive Engineering (TMCE 2012), Karlsruhe, Germany, May 7-11, 2012. Ed.: I. Horváth, 267–278, Delft University of Technology (TU Delft) 

Advanced systems engineering - Towards a model-based and human-centered methodology
Albers, A.; Lohmeyer, Q.
2012. Tools and methods of competitive engineering: Proceedings of the ninth International Symposium on Tools and Methods of Competitive Engineering (TMCE 2012), Karlsruhe, Germany, May 7-11, 2012. Ed.: I. Horváth, 407–416, Delft University of Technology (TU Delft) 

A Numerical Method for Investigating Mixed Lubrication Phenomena
Albers, A.; Lorentz, B.
2012. Tools and methods of competitive engineering: Proceedings of the ninth International Symposium on Tools and Methods of Competitive Engineering (TMCE 2012), Karlsruhe, Germany, May 7-11, 2012. Ed.: I. Horváth, 357–368, Delft University of Technology (TU Delft) 

A numerical way for investigating the impact of surface roughness on mixed lubrication friction
Albers, A.; Lorentz, B.
2012. Proceedings of NORDTRIB 2012: 15th Nordic Symposium on Tribology, 12-15 June 2012 Trondheim, Norway. Ed.: N. Espallargas, 1 CD, NTNU 

Development of a new validation environment for CFD simulations on the example of a lubricated clutch
Albers, A.; Brezger, F.; Koch, C.
2012. Getriebe in Fahrzeugen 2012 = Drivetrain for vehicles 2012. Internationaler VDI-Kongress, Friedrichshafen, June 19-20, 2012, 443–460, VDI Verlag 

Systematisch zu Mobilitätslösungen
Albers, A.; Behrendt, M.; Ott, S.
2012. Automobil-Konstruktion, 2012 (2), 38–39 

Reducing Power Loss of Hydrodynamik Journal Bearing By Means Of Condition Monitoring And Automatic Lubrication Flow Control
Alber, A.; Nguyen, T.; Burger, W.
2012. Industrial and automotive lubrication: 18th International Colloquium Tribology, Ostfildern, January 10 - 12, 2012. Ed.: W. J. Bartz, 115, Technische Akademie Esslingen (TAE) 

Die Stadtpfarrkirche St. Josef in Weiden/OPf.: Eine sakrale Bauaufgabe und ihre Lösung um die Wende zum 20. Jahrhundert. PhD dissertation
Pfeffer, R. J.
2012. Karlsruher Institut für Technologie (KIT) 

Extensive air shower detection with CROME in the L band
Mathys, S.; Baur, S.; Bertaina, M. E.; Blümer, J.; Chiavassa, A.; Engel, R.; Haungs, A.; Huege, T.; Kampert, K. H.; Klages, H.; Kleifges, M.; Kroemer, O.; Ludwig, M.; Neunteufel, P.; Pekala, J.; Rautenberg, J.; Riegel, M.; Roth, M.; Salamida, F.; Schieler, H.; et al.
2012. 5th Internat.Workshop on Acoustic and Radio EeV Neutrino Detection Activities (ARENA 2012), Erlangen, June 19-22, 2012 

Theory and simulation of air shower radio emission
Huege, T.
2012. 5th Internat.Workshop on Acoustic and Radio EeV Neutrino Detection Activities (ARENA 2012), Erlangen, June 19-22, 2012 

Insect imaging at ANKA: Methods, recent developments and perspective
Kamp, T. van de; Santos Rolo, T. dos; Vagovic, P.; Riedel, A.; Baumbach, T.
2012. 24th Internat.Congress of Entomology, Daegu, Korea, August 29-24, 2012, 24th Internat.Congress of Entomology (2012), Daegu, South Korea, August 24–29, 2012 

X-ray emission spectroscopy (XES) on sulfur in framework silicates
Göttlicher, J.; Kavcic, M.; Bucar, K.; Zitnik, M.; Kvashnina, K. O.; Vitova, T.; Steininger, R.
2012. 15th International Conference on X-ray Absorption Fine Structure (XAFS15), Beijing, China, July 22-28, 2012 

Commissioning of a new beam-position monitoring system at ANKA
Marsching, S.; Hiller, N.; Huttel, E.; Judin, V.; Kehrer, B.; Klein, M.; Meuter, C.; Müller, A. S.; Nasse, M. J.; Schuh, M.; Smale, N. J.; Streichert, M.; Rehm, G.
2012. Internat.Particle Accelerator Conf.2012 (IPAC 2012), New Orleans, La., May 20- 25, 2012 

Present status and future programs of the n_TOF experiment
n_TOF Collaboration; Chiaveri, E.
2012. EPJ Web of Conferences, 21, 03001/1–13. doi:10.1051/epjconf/20122103001 

Vibrational symmetry breaking of supported nanospheres
Kotaidis, V.; Dekorsy, T.; Ibrahimkutty, S. D.; Issenmann, D.; Plech, A.; Khakhulin, D.
2012. Physical Review B, 86, 100101/1–5. doi:10.1103/PhysRevB.86.100101 

A portable molecular beam epitaxy system for in situ x-ray investigations at synchrotron beamlines
Slobodskyy, T.; Schroth, P.; Grigoriev, D.; Minkevich, A. A.; Hu, D. Z.; Schaadt, D. M.; Baumbach, T.
2012. Review of scientific instruments, 83, 105112/1–7. doi:10.1063/1.4759495 

A desktop X-ray monochromator for synchrotron radiation based on refraction in mosaic prism lenses
Liu, T.; Simon, R.; Batchelor, D.; Nazmov, V.; Hagelstein, M.
2012. Journal of Synchrotron Radiation, 19, 191–197. doi:10.1107/S0909049511052307 

Imaging properties of small-pixel spectroscopic x-ray detectors based on cadmium telluride sensors
König, T.; Schulze, J.; Zuber, M.; Rink, K.; Butzer, J.; Hamann, E.; Cecilia, A.; Zwerger, A.; Fauler, A.; Fiederle, M.; Oelfke, U.
2012. Physics in Medicine and Biology, 57, 6743/6759. doi:10.1088/0031-9155/57/21/6743 

On the fundamental structure of femtosecond laser-induced nanogratings
Richter, S.; Plech, A.; Steinert, M.; Heinrich, M.; Döring, S.; Zimmermann, F.; Peschel, U.; Kley, E. B.; Tünnermann, A.; Nolte, S.
2012. Laser & Photonics Reviews, 6, 787–792. doi:10.1002/lpor.201200048 

Efficient low-storage Runge-Kutta schemes with optimized stability region
Niegemann, J.; Diehl, R.; Busch, K.
2012. Journal of Computational Physics, 231 (2), 364–372. doi:10.1016/j.jcp.2011.09.003