Technik
Grunwald, A.
2013. Grunwald, A. [Hrsg.] Handbuch Technikethik Stuttgart : Metzler’sche Verlagsbuchhandlung, 2013, 13–17 

Die Transformation des Energiesystems als gesellschaftliche und technische Herausforderung. Zur Notwendigkeit integrativer Energieforschung
Grunwald, A.; Schippl, J.
2013. Radtke, J. [Hrsg.] Die deutsche ’Energiewende’ nach Fukushima : Der wissenschaftliche Diskurs zwischen Atomausstieg und Wachstumsdebatte Marburg : Metropolis-Verlag, 2013 (Beiträge zur sozialwissenschaftlichen Nachhaltigkeitsforschung ; 8), 21–35 

Prognostik statt Prophezeiung. Wissenschaftliche Zukünfte für die Politikberatung
Grunwald, A.
2013. Weidner, D. [Hrsg.] Prophetie und Prognostik : Verfügungen über Zukunft in Wissenschaften, Religionen und Künsten München : Wilhelm Fink Verlag, 2013 (Trajekte), 81–95 

Parlamentarische Technikfolgenabschätzung
Grunwald, A.
2013. Simonis, G. [Hrsg.] Konzepte und Verfahren der Technikfolgenabschätzung Wiesbaden : Springer VS, 2013, 91–107 

Dynamische Entwurfsoptimierung eines KWK-Systems. Vergleichende Analyse von thermischen Speichern und Nahwärmeleitung
Rieder, A.
2013. BWK - Das Energie-Fachmagazin, 65 (10), 7–13 

Electronic structure, adsorption geometry, and photoswitchability of azobenzene layers adsorbed on layered crystals
Ludwig, E.; Strunskus, T.; Hellmann, S.; Nefedov, A.; Wöll, C.; Kipp, L.; Rossnagel, K.
2013. Physical Chemistry Chemical Physics, 15, 20272–20280. doi:10.1039/C3CP53003E 

Stetige Galerkinverfahren für zeitabhängige Maxwellgleichungen mit Kerr-Nichtlinearität. PhD dissertation
Gerner, H.
2013. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000037035  

Messung und Anwendung von anisotropen NMR Parametern in gestreckten Polymergelen und flüssigkristallinen Phasen und metabolische Studien an chinesischen Heilpflanzen. PhD dissertation
Merle, C.
2013. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000037034  

Design and production of the ECCOFLOW resistive fault current limiter
Hobl, A.; Goldacker, W.; Dutoit, B.; Martini, L.; Petermann, A.; Tixador, P.
2013. IEEE Transactions on Applied Superconductivity, 23, 5601804/1–4. doi:10.1109/TASC.2013.2238288 

Thermal properties of REBCO copper stabilized superconducting tapes
Bagrets, N.; Goldacker, W.; Jung, A.; Weiss, K. P.
2013. IEEE Transactions on Applied Superconductivity, 23, 6600303/1–3. doi:10.1109/TASC.2012.2233268 

Low AC loss cable produced from transposed striated CC tapes
Souc, J.; Gömöry, F.; Kovac, J.; Nast, R.; Jung, A.; Vojenciak, M.; Grilli, F.; Goldacker, W.
2013. Superconductor Science and Technology, 26, 075020/1–5. doi:10.1088/0953-2048/26/7/075020 

Nuclear Fusion Programme: Annual Report of the Association Karlsruhe Institute of Technology/EURATOM ; January 2012 - December 2012 (KIT Scientific Reports ; 7647)
Pleli, I. (Ed.)
2013. KIT Scientific Publishing. doi:10.5445/KSP/1000037014  

Incorporating Business Impact into Service Offers - A Procedure to Select Cost-Optimal Service Contracts
Kieninger, A.; Schmitz, B.; Straeten, D.; Satzger, G.
2013. 18th Americas Conference on Information Systems, AMCIS 2012, Seattle, Washington, USA, 9 - 12 August 2012. Ed.: Association for Information Systems, Curran 

Erfolgsfaktoren deutscher E-Ventures in der Early-Stage-Phase. diploma thesis
Ziegler, C.
2013. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000036996  

New European Recommendations for the design and application of sandwich panels - Results of the work of the Joint Committee on Sandwich Constructions
Berner, K.; Hassinen, P.; Heselius, L.; Izabel, D.; Käpplein, S.; Lange, J.; Misiek, T.; Rädel, F.; Tillonen, A.; Zupancic, D.
2013. Steel construction, 6 (4), 294–300. doi:10.1002/stco.201330036 

Stabilisierung von Bauteilen durch Sandwichelemente - Kopplung mit quasi-starren Auflagern
Käpplein, S.; Misiek, T.
2013. Stahlbau, 82 (11), 828–832. doi:10.1002/stab.201310092 

Strategic Learning by e-Service Suppliers in Service Value Networks
Haas, C.; Caton, S. O.; Dinther, C. van
2013. Journal of service research, 16 (3), 259–276. doi:10.1177/1094670512462130 

The distribution of relaxation times as basis for generalized time-domain models for Li-ion batteries
Schmidt, J. P.; Berg, P.; Schönleber, M.; Weber, A.; Ivers-Tiffée, E.
2013. Journal of Power Sources, 221, 70–77. doi:10.1016/j.jpowsour.2012.07.100 

Electrochemical Modeling of the Current-Voltage Characteristics of an SOFC in Fuel Cell and Electrolyzer Operation Modes
Njodzefon, J.-C.; Klotz, D.; Kromp, A.; Weber, A.; Ivers-Tiffée, E.
2013. Journal of the Electrochemical Society, 160, F313–323. doi:10.1149/2.018304jes 

High-Temperature pO2 Stability of Metal Oxides Determined by Amperometric Oxygen Titration
Niedrig, C.; Menesklou, W.; Wagner, S. F.; Ivers-Tiffée, E.
2013. Journal of the Electrochemical Society, 160, F135-F140. doi:10.1149/2.063302jes 

Hetero-Interfaces at Nanoscaled (La,Sr)CoO3-d Thin-Film Cathodes Enhancing Oxygen Surface-Exchange Properties
Hayd, J.; Yokokawa, H.; Ivers-Tiffée, E.
2013. Journal of the Electrochemical Society, 160, F351-F359. doi:10.1149/2.017304jes 

Degradation of a High Performance SOFC Cathode by Cr-Poisoning at OCV-Conditions
Kornely, M.; Menzler, N. H.; Weber, A.; Ivers-Tiffée, E.
2013. Fuel Cells, 13, 506–510. doi:10.1002/fuce.201200182 

Sulfur Poisoning of Anode-Supported SOFCs under Reformate Operation
Weber, A.; Dierickx, S.; Kromp, A.; Ivers-Tiffée, E.
2013. Fuel Cells, 13, 487–493. doi:10.1002/fuce.201200180 

Understanding the impedance spectrum of 18650 LiFePO4-cells
Illig, J.; Schmidt, J. P.; Weiss, M.; Weber, A.; Ivers-Tiffée, E.
2013. Journal of Power Sources, 239, 670–679. doi:10.1016/j.jpowsour.2012.12.020 

Analysis and Prediction of the Open Circuit Potential of Lithium-Ion Cells
Schmidt, J. P.; Tran, H. Y.; Richter, J.; Ivers-Tiffée, E.; Wohlfahrt-Mehrens, M.
2013. Journal of Power Sources, 239, 696–704. doi:10.1016/j.jpowsour.2012.11.101 

Secondary phase formation in Ba0.5Sr0.5Co0.8Fe0.2O3-d (BSCF) studied by electron microscopy
Müller, P.; Störmer, H.; Meffert, M.; Dieterle, L.; Niedrig, C.; Wagner, S. F.; Ivers-Tiffée, E.; Gerthsen, D.
2013. Chemistry of Materials, 25 (4), 564–573. doi:10.1021/cm303670m 

Challenges related to the use of liquid metal and molten salt coolants in advanced reactors
Bang, K. H.; Bilbao, Y. L. S.; Jianu, A.; Kim, S. B.; Maheshwari, N. K.; Meloni, P.; Meyer, L.; Monti, S.; Souza Dos Santos, R.; Xu, Y.
2013. (W7-X ECRH Teams at IPP, IPF and KIT, Ed.), Wien : IAEA, 2013 IAEA-TECDOC-1696 

CityGML - Anwendungen und Weiterentwicklung
Benner, J.
2013. Geomatik Aktuell : Seminar, Hochschule Karlsruhe Technik und Wirtschaft, 24.Oktober 2013 

Manufacturing and joining technologies for helium cooled divertors
Aktaa, J.; Basuki, W.; Weber, T.; Norajitra, P.; Krauss, W.; Konys, J.
2013. 11th International Symposium on Fusion Nuclear Technology (ISFNT 2013), Barcelona, E, September 16-20, 2013 

Auslegung eines Gasanwärmers für kryogenes Helium
Schrank, M.; Reiner, A.
2013. Deutsche Kälte-Klima-Tagung, Hannover, 20.-22. November 2013 

FBI - Measurement facility for high temperature superconducting cable designs
Bayer, C.; Barth, C.; Gade, P. V.; Heller, R.; Weiss, K. P.
2013. International Conference on Magnet Technology (MT 2013), Boston, Mass., July 14- 19, 2013 

New airborne thermal infrared photogrammetric applications and sensors for moisture detection
Kemper, G.; Schuhmann, R.; Königer, F.
2013. International Conference on Electromagnetic Wave Interaction with Water and Moist Substances, Weimar, September 25-27, 2013 

Research expectations for advanced nuclear systems
Schulenberg, T.
2013. 8th European Conference on Euratom Research and Training in Reactor Systems (FISA 2013), Vilnius, LT, October 14-17, 2013 

Neutronic analyses and tools development efforts in the European DEMO programme
Fischer, U.; Bachmann, C.; Catalan, J. P.; Lengar, I.; Szieberth, M.; Pampin, R.; Porton, M.; Pereslavtsev, P.; Ogando, F.; Tracz, G.; Villari, R.
2013. 11th International Symposium on Fusion Nuclear Technology (ISFNT 2013), Barcelona, E, September 16-20, 2013 

Ultra-fast data acquisition system for coherent synchrotron radiation based on superconducting terahertz detectors
Caselle, M.; Balzer, M.; Cilingaryan, S.; Hofherr, M.; Judin, V.; Kopmann, A.; Il’in, K.; Menshikov, A.; Müller, A. S.; Smale, N. J.; Thoma, P.; Wuensch, S.; Siegel, M.; Weber, M.
2013. 4th International Particle Accelerator Conference (IPAC 2013), Shanghai, China, May 12-17, 2013 

Tungsten damage and melt losses under the plasma accelerators exposures in ITER ELM conditions
Makhlai, V. A.; Garkusha, I. E.; Aksenov, N. N.; Petrov, Y. V.; Bazylev, B.; Landman, I.; Linke, J.; Wirtz, M.; Malykhin, S. V.; Pugachov, A. T.; Skladnik-Sadowska, E.; Sadowski, M. J.
2013. 14th Internat.Conf.on Plasma-Facing Materials and Components for Fusion Applications, Jülich, May 13-17, 2013 Book of Abstracts A043 

Quantitative TEM investigation of neutron irradiated EUROFER97 from WTZ and ARBOR1
Dethloff, C.; Gaganidze, E.
2013. EFDA MAT-IREMEV Monitoring Meeting, Bucuresti, R, June 26-28, 2013 

Low resistive soldering joints for HTS tapes
Bayer, C.; Bagrets, N.; Barth, C.; Goldacker, W.; Weiss, K. P.
2013. 7th Mechanical and Electromagnetic Effects in Superconductors Workshop (MEM 2013), Aix-en-Provence, F, March 12-14, 2013 

Low temperature measurement and control technique
Süßer, M.
2013. VDI Wissensforum Cryogenics, Karlsruhe, 9.-11. Oktober 2013 

Kryogene Mess-, Regel- und Sicherheitstechnik
Süßer, M.
2013. Seminar Kryostatbau, Karlsruhe, 16-18. Oktober 2013 

Mesostructured metal oxide thin films with cubic pore symmetry: Preparation, properties, and applications
Reitz, C.; Haetge, J.; Suchomski, C.; Brezesinski, T.
2013. GISAXS Workshop, Hamburg, October 7-9, 2013 

Work package No.1: Irradiation damage - advanced characterization and modeling, FabriCharMe
Commin, L.
2013. GOT Program Progress Meeting, Warszawa, PL, July 15, 2013 

Vertical exchange processes over the Corsican island on convective days
Adler, B.; Kalthoff, N.
2013. 7th HyMeX International Workshop, Cassis, F, October 7-10, 2013 

Observed interactions of convection and the large-scale atmospheric environment in Corsica
Kalthoff, N.; Adler, B.
2013. 7th HyMeX International Workshop, Cassis, F, October 7-10, 2013 

Sensitivity of simulated precipitation over Mediterranean islands to model resolution and turbulence parameterization
Barthlott, C.
2013. 7th HyMeX International Workshop, Cassis, F, October 7-10, 2013 

Polymer microfabrication: Methods and application
Hanemann, T.
2013. Plastic Goes Micro, Liege, B, October 22, 2013  

Multicomponent powder injection molding as method for mass production, joining, and material development for tungsten armour materials
Antusch, S.; Armstrong, D. E. J.; Britton, T. B.; Commin, L.; Gibson, J. S. K. L.; Greuner, H.; Hoffmann, J.; Knabl, W.; Müller, M.; Pintsuk, G.; Piotter, V.; Reiser, J.; Rieth, M.; Roberts, S. G.; Weingaertner, T.
2013. 16th International Conference on Fusion Reactor Materials (ICFRM-16), Beijing, China, October 20-26, 2013  

Surface properties of montmorillonite and influences on bentonite properties. Part I: Baseline study of seven particle size fractions
Delavernhe, L.; Steudel, A.; Schäfer, T.; Darbha, G. K.; Schuhmann, R.; Wöll, C.; Geckeis, H.; Emmerich, K.
2013. 50th CMS Annual Meeting, Urbana-Champaign, Ill., October 6-10, 2013 

Parameterization of volumetric water content of clays at low moisture levels
Kaden, H.; Königer, F.; Schuhmann, R.; Wagner, N.; Emmerich, K.
2013. Jahrestagung der Deutschen Bodenkundlichen Gesellschaft, Rostock, 7.-12. September 2013 

Hydration of homoionic saturated clay minerals
Emmerich, K.; Königer, F.; Schuhmann, R.; Kaden, H.
2013. Jahrestagung der Deutschen Bodenkundlichen Gesellschaft, Rostock, 7.-12. September 2013 

Kinetics of dehydroxylation of cis-vacant montmorillonites at 540 and 700 sup(o)C and spontaneous rehydroxylation
Emmerich, K.; Schuhmann, R.; Steudel, A.
2013. 50th CMS Annual Meeting, Urbana-Champaign, Ill., October 6-10, 2013 

Geopolymer cements from Eocene illite/smectite rich Friedland clay, NE Germany, to seal boreholes
Grathoff, G. H.; Dietel, J.; Bertmer, M.; Emmerich, K.; Warr, L. N.
2013. 50th CMS Annual Meeting, Urbana-Champaign, Ill., October 6-10, 2013 

Transmission tomography for 3D USCT
Dapp, R.
2013. Vortr.: Technische Universität Delft, NL, 4.Februar 2013  

Validation of fragment penetration analysis with ANSYS
Zeiger, T.; Schulenberg, T.
2013. Workshop on Codes and Experimental Methods to Analyze SCWRs, Budapest, H, September 6, 2013 

Validation of the system code APROS for fast transients
Raque, M.; Schulenberg, T.
2013. Workshop on Codes and Experimental Methods to Analyze SCWRs, Budapest, H, September 6, 2013 

Packing experiments of beryllium pebble beds for the fusion reactor HCPB blanket
Reimann, J.; Abou-Sena, A.; Brun, E.; Fretz, B.
2013. 11th IEA International Workshop on Beryllium Technology (BeWS 2013), Barcelona, E, September 12-13, 2013 

Some existing experimental facilities for fast neutron systems at KIT
Litfin, K.
2013. IAEA Technical Meeting on Existing and Proposed Experimental Facilities for Fast Neutron Systems, Wien, June 10-12, 2013 

Geothermale Stromerzeugung - Stand und zukünftige Entwicklung
Kuhn, D.
2013. 10. Biberacher Geothermietag, Biberach, 10. Oktober 2013 

CFD study of isothermal water flow in rod bundle with split-type spacer grid
Batta, A.; Class, A. G.
2013. International Conference on Supercomputing in Nuclear Applications and Monte Carlo (SNA & MC 2013), Paris, F, October 27-31, 2013 

Structural modification and self-assembly of nanoscale magnetite synthesised in the presence of an anionic surfactant
Malik, S.; Hewitt, I. J.; Powell, A. K.
2013. European Conference on Molecular Magnetism (ECMM 2013), Karlsruhe, October 6-10, 2013 

Characterization of few-layer graphene (FLG) starting with pristine graphite via wet chemical functionalization
Malik, S.; Liebscher, C.; Kostakis, G.; Wang, D.; Potratz, S.; Balaban, C.; Balaban, S.
2013. 7th International Conference on Materials for Advanced Technologies (ICMAT 2013), Singapore, SGP, June 30 - July 5, 2013 

Non-linear failure analysis of HCPB blanket for DEMO taking into account high dose irradiation
Aktaa, J.; Kecskes, S.; Pereslavtsev, P.; Fischer, U.; Boccaccini, L. V.
2013. 11th International Symposium on Fusion Nuclear Technology (ISFNT 2013), Barcelona, E, September 16-20, 2013 

A micromechanical model for effective transport properties of granular electrode structures
Ott, J.; Völker, B.; Gan, Y.; McMeeking, R. M.; Kamlah, M.
2013. Powders & Grains International Conference, Sydney, AUS, July 8-12, 2013 

Investigation of 2G coil SCFCL - Modeling and testing
Sousa, W. T. B. de; Polasek, A.; Dias, R.; Matt, C. F. T.; Silva, F. A. da; Andrade, R. de
2013. European Conference on Applied Superconductivity (EUCAS 2013), Genova, I, September 15-19, 2013 

VATESTA - A new measurement setup for power and energy applications
Gehring, R.; Goldacker, W.
2013. European Conference on Applied Superconductivity (EUCAS 2013), Genova, I, September 15-19, 2013 

Design of continuous emulsification process dealing with a highly viscous oil
Li, Y.; Wengerter, M.; Gerken, I.; Scholl, S.; Brandner, J. J.
2013. Jahrestreffen der Fachgruppe Mikroverfahrenstechnik, Frankfurt, 28. Oktober 2013 

Creep-fatigue interaction in Eurofer 3 electron beam welds
Commin, L.; Baumgärtner, S.; Dafferner, B.; Heger, S.; Rieth, M.; Möslang, A.
2013. 16th International Conference on Fusion Reactor Materials (ICFRM-16), Beijing, China, October 20-26, 2013 

Assessment of copper based materials for the water-cooled divertor concept of the DEMO European fusion reactor
Commin, L.; Antusch, S.; Baumgärtner, S.; Goldacker, W.; Lukits, P.; Rieth, M.; Bolich, D.; Hoffmann, M.
2013. 25th Symposium on Fusion Engineering (SOFE 2013), San Francisco, Calif., June 10-14, 2013 

Corrosion barriers processed by Al-electroplating and their resistance against flowing Pb-15.7Li
Krauss, W.; Konys, J.; Wulf, S. E.
2013. 16th International Conference on Fusion Reactor Materials (ICFRM-16), Beijing, China, October 20-26, 2013  

Size dependent crush analysis of lithium orthosilicate pebbles for fusion reactors
Annabattula, R. K.; Kolb, M.; Rolli, R.; Gan, Y.; Kamlah, M.
2013. 16th International Conference on Fusion Reactor Materials (ICFRM-16), Beijing, China, October 20-26, 2013  

Ultra-fast data acquisition system for coherent synchrotron radiation with terahertz detectors
Caselle, M.; Chilingaryan, S.; Hofherr, M.; Judin, V.; Kopmann, A.; Müller, A. S.; Siegel, M.; Smale, N. J.; Thoma, P.; Weber, M.; Wuensch, S.
2013. Topical Workshop on Electronics for Particle Physics (TWEPP 13), Perugia, I, September 23-27, 2013  

Bis(dimethyl sulfoxide-κO)tetrakis(μ₂-3,4,5-trimethoxybenzoato-κ²O:O’)-dizinc
Deutsch, D.; Zevaco, T.; Walter, O.
2013. Acta Crystallographica E, 69, m519. doi:10.1107/S1600536813023118 

Synthesis and electrochemical performance of nanocrystalline Al₀̣₄Mg₀̣₂Sn₀̣₄O₁̣₆ and Al₀̣₂₅Mg₀̣₃₈Sn₀̣₃₈O₁̣₅ investigated by in situ XRD, ²⁷Al/¹¹⁹Sn MAS NMR, ¹¹⁹Sn Mössbauer spectroscopy, and galvanostatic cycling
Issac, I.; Heinzmann, R.; Kaus, M.; Zhao-Karger, Z.; Gesswein, H.; Bergfeldt, T.; Chakravadhanula, V. S. K.; Kübel, C.; Hahn, H.; Indris, S.
2013. Journal of materials chemistry / A, 1, 13842–13852. doi:10.1039/C3TA12805A 

MD simulation of atomic displacement cascades near chromium-rich clusters in FeCr alloy
Tikhonchev, M.; Svetukhin, V.; Gaganidze, E.
2013. Journal of Nuclear Materials, 442, S618-S623. doi:10.1016/j.jnucmat.2012.11.058 

Modeling of chromium nanocluster growth under neutron irradiation
Svetukhin, V.; L’vov, P.; Tikhonchev, M.; Gaganidze, E.; Krestina, N.
2013. Journal of Nuclear Materials, 442, S624-S627. doi:10.1016/j.jnucmat.2013.03.030 

Room-temperature anelasticity and viscoplasticity of Cu-Zr bulk metallic glasses evaluated using nanoindentation
Yoo, B. G.; Choi, I. C.; Kim, Y. J.; Ramamurty, U.; Jang, J. I.
2013. Materials Science and Engineering A, 577, 101–104. doi:10.1016/j.msea.2013.04.031 

Validation of a model for radon-induced background processes in electrostatic spectrometers
Wandkowsky, N.; Drexlin, G.; Fränkle, F. M.; Glück, F.; Groh, S.; Mertens, S.
2013. Journal of Physics G: Nuclear and Particle Physics, 40, 085102/1–18. doi:10.1088/0954-3899/40/8/085102 

A fail-safe and cost effective fabrication route for blanket first walls
Commin, L.; Rieth, M.; Dafferner, B.; Zimmermann, H.; Bolich, D.; Baumgärtner, S.; Ziegler, R.; Dichiser, S.; Fabry, T.; Fischer, S.; Hildebrand, W.; Palussek, O.; Ritz, H.; Sponda, A.
2013. Journal of Nuclear Materials, 442, 538–541. doi:10.1016/j.jnucmat.2013.07.043 

Low-frequency dielectric properties of three bentonites at different adsorbed water states
Kaden, H.; Königer, F.; Stroemme, M.; Niklasson, G. A.; Emmerich, K.
2013. Journal of Colloid and Interface Science, 411, 16–26. doi:10.1016/j.jcis.2013.08.025 

The swelling and dissolution of cellulose crystallites in subcritical and supercritical water
Tolonen, L. K.; Penttilä, P. A.; Serimaa, R.; Kruse, A.; Sixta, H.
2013. Cellulose, 20, 2731–2744. doi:10.1007/s10570-013-0072-7 

Electrochemical insertion of Li into nanocrystalline MnFe₂O₄: a study of the reaction mechanism
Permien, S.; Hain, H.; Scheuermann, M.; Mangold, S.; Mereacre, V.; Powell, A. K.; Indris, S.; Schürmann, U.; Kienle, L.; Duppel, V.; Harm, S.; Bensch, W.
2013. RSC Advances, 3, 23001–23014. doi:10.1039/C3RA44383C 

Zur Strömungsphysik der turbulenten Mischung an filmgekühlten Turbinenschaufel-Hinterkanten. PhD dissertation
Schneider, H.
2013. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000036961  

Reibermüdung ingenieurkeramischer Werkstoffe unter Variation der Beanspruchungsparameter. PhD dissertation
Wörner, C.
2013. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000036960  

Robuste Portfolio-Optimierung. PhD dissertation
Sinske, M.
2013. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000036959  

Flexible Synthesestrategie zur Darstellung von Tetrahydroxanthenon-Naturstoffen. PhD dissertation
Meister, A. C.
2013. Logos Verlag Berlin 

Plastizität nanokristalliner Palladiumschichten beobachtet mittels Röntgenbeugung im Zugversuch. PhD dissertation
Baumbusch, R.
2013. Karlsruher Institut für Technologie (KIT)  

The transition from spark to arc discharge and its implications with respect to nanoparticle production
Hontañón, E.; Palomares, J. M.; Stein, M.; Guo, X.; Engeln, R.; Nirschl, H.; Kruis, F. E.
2013. Journal of Nanoparticle Research, 15 (9), 19 S. doi:10.1007/s11051-013-1957-y 

SWAXS investigations on diffuse boundary nanostructures of metallic nanoparticles synthesized by electrical discharges
Guo, X.; Gutsche, A.; Nirschl, H.
2013. Journal of Nanoparticle Research, 15 (11), 13 S. doi:10.1007/s11051-013-2058-7 

Mechanical Stress on Lysozyme Crystals during Dynamic Cross-Flow Filtration
Cornehl, B.; Grünke, T.; Nirschl, H.
2013. Chemical Engineering & Technology, 36 (10), 1665–1674. doi:10.1002/ceat.201300178 

Subchannel blockage accident analysis of MYRRHA reactor
Chen, X. N.; Li, R.; Rineiski, A.
2013. 4th Conference on Heavy Liquid Metal Coolants in Nuclear Technologies (HLMC 2013), Obninsk, Russia, September 22-27, 2013 

On LBE natural convection and its water experimental simulation
Chen, X. N.
2013. 16th International Conference on Emerging Nuclear Energy Systems (ICENES 2013), Madrid, E, May 26-30, 2013 

Denkwerkzeuge nach der Natur
Mattheck, C.
2013. Vortr.: Firma IWIS, München, 18.Juli 2013 

Denkwerkzeuge nach der Natur
Mattheck, C.
2013. Vortr.: Firma Schuler Pressen GmbH, Hannover, 18.September 2013 

Visual tree assessment
Mattheck, C.
2013. Baumdiagnoseseminar Berliner Forsten, Berlin, 23.-24.September 2013 

Visual tree assessment
Mattheck, C.
2013. Baumdiagnoseseminar für das Berzirksamt Berlin Mitte, Berlin, 13.-14.August 2013 

Warum alles kaputt geht
Mattheck, C.
2013. Vortrag: Audi AG, Heilbronn, 2.Juli 2013 

Warum alles kaputt geht
Mattheck, C.
2013. Inhouse Seminar, Firma Temic Automotive Electric Motors GmbH, Berlin, 15.August 2013 

Phase-field modeling of the coupling between diffusion and stresses in electrode particles of lithium ion batteries
Huttin, M.; Kamlah, M.
2013. Solid State Electrochemistry : Multiscale Modeling and Experimental Methods (SSE2013), Heidelberg, July 22-24, 2013 

Warum alles kaputt geht
Mattheck, C.
2013. Inhouse Seminar, Firma RePower, Osterrönfeld, 5.September 2013 

Tritium release properties of beryllium grades of Materion Corporation production after loading by tritium/hydrogen gas mixture
Rolli, R.; Chakin, V.; Möslang, A.; Schneider, H. C.; Dorn, C.
2013. 11th IEA International Workshop on Beryllium Technology, Barcelona, E, September 12-13, 2013