Robust Data Transmission with Eddy Current Sensor Hensel, S.; Hasberg, C.; Rütters, R. 2008. Computer system design and operation in the railway and other transit systems. Ed.: J. Allan, WIT Press
HMM Based Segmentation of Continuous Eddy Current Sensor Signal Hensel, S.; Hasberg, C. 2008. Proceedings of 2008 IEEE International Conference on Service Operations and Logistics and Informatics, October 12 - 15, 2008, 760–765, Institute of Electrical and Electronics Engineers (IEEE)
Integrating Spline Curves in Road Constraint Object Tracking Hasberg, C.; Hensel, S.; Westenkirchner, M.; Bach, K. 2008. Proceedings of 2008 IEEE International Conference on Service Operations and Logistics and Informatics, October 12 - 15, 2008, 1009–1014, Institute of Electrical and Electronics Engineers (IEEE)
Kontinuierliche Selbstkalibrierung von Stereokameras Dang, T.; Stiller, C. 2008. Tagungsband / XXII. Messtechnisches Symposium des Arbeitskreises der Hochschullehrer für Messtechnik e.V., 11.-13. September 2008. Hrsg.: J. Czarske, 109–120, Shaker Verlag
Context-Aware Object Priors Bachmann, A.; Balthasar, M. 2008. IROS 2008 - 2nd Workshop: Planning, Perception and Navigation for Intelligent Vehicles, September 26, 2008, Nice, France, 6 S., Nice
Examples on CD-ROM Rack, A.; Ferrero, C.; Godehardt, M.; Mirone, A.; Ohser, J.; Reinhart, C. 2008. Appendix B to Banhart, J. [Hrsg.] Advanced Tomographic Methods in Materials Research and Engineering Oxford [u.a.] : Oxford Univ.Press, 2008 (Monographs on the Physics and Chemistry of Materials), 449–51
Theoretical analysis of X-ray waveguides Lagomarsino, S.; Bukreeva, I.; Cedola, A.; Pelliccia, D.; Jark, W. 2008. Erko, A. [Hrsg.] Modern Developments in X-Ray and Neutron Optics Berlin [u.a.] : Springer, 2008 (Springer Series in Optical Sciences ; 137), 91–111
High resolution 1D and 2D crystal optics based on asymmetric diffractors Korytar, D.; Ferrari, C.; Mikulik, P.; Germini, F.; Vagovic, P.; Baumbach, T. 2008. Erko, A. [Hrsg.] Modern Developments in X-Ray and Neutron Optics Berlin [u.a.] : Springer, 2008 (Springer Series in Optical Sciences ; 137), 501–12
Discussion of CAA Calculation Methods for Internal Flows Pantle, I.; Gabi, M. 2008. Proceedings / Inter-Noise 2008, the 37th International Congress and Exposition on Noise Control Engineering, October 26 - 29, 2008; 1 CD-Rom, Institute of Acoustics
Influence of Argon Gas Pressure and Target Power on Magnetron Plasma Parameters Albers, A.; Bsul, J.; Nguyen, T.; Beauvais, S.; Burger, W.; Ulrich, S.; Stüber, M.; Ye, J. 2008. Proceedings of the Diamond 2008 - 19th European Conference on Diamond, Diamond-Like Materials, Carbon Nanotubes, and Nitrides, Sep. 7-11, 2008, Sitges, Spain, Sitges
An Approach for the Modularization of a Product Architecture in Redesign Processes of Complex Systems Albers, A.; Sedchaicharn, K.; Sauter, C.; Burger, W. 2008. Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference - 20th International Conference on Design Theory and Methodology (DTM), The American Society of Mechanical Engineers (ASME)
Humanoid Robots - Connecting Humans and Technology Albers, A.; Sauter, C.; Frietsch, M.; Ottnad, C. 2008. Proceedings / International Conference "Technologies of globalization", october 30-31, 2008. Ed.: R. Anderl, Techn. Univ
Condition-Monitoring Based on Structure-borne Ultrasound Analysis Albers, A.; Dickerhof, M.; Burger, W. 2008. Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference - 32nd Annual Mechanisms and Robotics Conference (MR), The American Society of Mechanical Engineers (ASME)
Prediction of Functionality and Life Cycle Performance of Microgears Albers, A.; Lanza, G.; Fleischer, J.; Oerding, J.; Deigendesch, T.; Enkler, H.-G.; Leslabay, P.; Schlipf, M. 2008. Proceedings of the 10th anniversary international conference of the European Society for Precision Engineering and Nanotechnology. Ed.: H. Van Brussel, European Society for Precision Engineering and Nanotechnology (euspen)
A systematic approach to supporting drive-train assembly design using new customer comfort objectifying tools Albers, A.; Lerspalungsanti, S.; Düser, T.; Ott, S.; Wang, J. 2008. Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference - 10th International Conference on Advanced Vehicle and Tire Technologies (AVTT), The American Society of Mechanical Engineers (ASME)
Humanoide Roboter weltweit und in Karlsruhe Albers, A.; Sauter, C.; Ottnad, J.; Frietsch, M.; Sedchaicharn, K. 2008. Mechatronik Tage 2008 - Internationale Konferenz und Fachmesse, 15. - 16. September 2008, Karlsruhe, Germany, Universität Karlsruhe (TH)
Integrated Topology and Fibre Optimization for 3-Dimesnional Composits Albers, A.; Ottnad, J.; Weiler, H. 2008. Proceedings / 2008 ASME International Mechanical Engineering Congress & Exposition - "Engineering a Better World", October 31 - November 6, 2008, Boston, Massachussets, USA, Boston
A New Test-Bench for Study of Plain Bearings Under Mixed Lubrication Albers, A.; Beauvais, S.; Bsul, J.; Burger, W. 2008. DETC 2008 - Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, The American Society of Mechanical Engineers (ASME)
Upper body design of a full-size humanoid robot Albers, A.; Burger, W.; Sauter, C.; Ottnad, J.; Sedchaicharn, K.; Frietsch, M. 2008. Proceedings of the 5th EUROPE-ASIA Congres on MECHATRONICS 2008, May 21st-23rd, 2008, Le Grand-Bornand, France, Le Grand-Bornand
Concept for environment simulation at the roller test bench Albers, A.; Düser, T.; Seifermann, A. 2008. Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference - 10th International Conference on Advanced Vehicle and Tire Technologies (AVTT), The American Society of Mechanical Engineers (ASME)
A Contribution to the Simulation of Molded Micro Components and Systems Albers, A.; Enkler, H.-G.; Leslabay, P. 2008. Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference - 2nd International Conference on Micro- and Nanosystems (MNS), The American Society of Mechanical Engineers (ASME)
System Simulation and Structural Optimization Albers, A.; Ottnad, J.; Häußler, P.; Minx, J. 2008. Emerging Technologies, Robotics and Control Systems. Ed.: S. Pennacchio, INTERNATIONALSAR Publishing Direction
Application of Artificial Neural Networks (ANN) for Monitoring of Vehicle Longitudinal Dynamic Performance Albers, A.; Wang, J.; Ott, S.; Düser, T.; Lerspalungsanti, S. 2008. Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference - 10th International Conference on Advanced Vehicle and Tire Technologies (AVTT), The American Society of Mechanical Engineers (ASME)
Model-Based System Monitor Using Artificial Neural Networks (ANN) Albers, A.; Wang, J.; Ott, S.; Düser, T.; Seifermann, A. 2008. Proceedings / 2008 ASME International Mechanical Engineering Congress & Exposition - "Engineering a Better World", October 31 -November 6, 2008, Boston, Massachussets, USA, Boston
Topology optimization of multiple parts in controlled dynamic systems Albers, A.; Ottnad, J.; Häußler, P.; Minx, J. 2008. DETC 2008 - Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, The American Society of Mechanical Engineers (ASME)
Information Integration and Cooperation in Product Development by Utilization of Wikis Albers, A.; Deigendesch, T.; Meboldt, M. 2008. TCM 2008 / Tools and methods of competitive engineering - proceedings of the 7th International Symposium on Tools and Methods of Competitive Engineering. Ed.: I. Horváth, Delft University of Technology (TU Delft)
Piracy Risk and Measure Analysis Albers, A.; Marxen, L.; Meboldt, M.; Oerding, T.; Schaeffler, T. 2008. 7. Internationales Heinz Nixdorf Symposium, 20. und 21. Februar 2008, Paderborn, Germany, 12 S., Paderborn
Topology and Controller Parameter Optimization in Dynamic Mechatronic Systems Albers, A.; Ottnad, J.; Häußler, P.; Minx, J. 2008. PAPERS / 12th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, 10 - 12 Sep 2008, Victoria, British Columbia, Canada; 1 DVD-Rom, American Institute of Aeronautics and Astronautics
KIT – Die Forschungsuniversität in der Helmholtz-Gemeinschaft