A New Approach to Link the Friction Coefficient with Topography Measurements during Plowing
Korres, S.; Feser, T.; Dienwiebel, M.
2013. Wear, 303 (1-2), 202–210. doi:10.1016/j.wear.2013.03.010 

The running-in mechanisms of binary brass studied by in-situ topography measurements
Feser, T.; Stoyanov, P.; Mohr, F.; Dienwiebel, M.
2013. Wear, 303 (1-2), 465–472. doi:10.1016/j.wear.2013.03.047 

Friction and wear mechanisms of tungsten-carbon systems: A comparison of dry and lubricated conditions
Stoyanov, P.; Stemmer, P.; Järvi, T. T.; Merz, R.; Romero, P. A.; Scherge, M.; Kopnarski, M.; Moseler, M.; Fischer, A.; Dienwiebel, M.
2013. ACS Applied Materials & Interfaces, 5 (13), 6123–6135. doi:10.1021/am4010094 

Group Activity Recognition using Belief Propagation for P2P Mobile Devices. (Technical Report, September 2nd 2013)
Gordon, D.; Scholz, M.; Beigl, M.
2013. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000036356  

Atomistic aspects of 1/2<111> screw dislocation behavior in alpha-iron and the derivation of microscopic yield criterion
Chen, Z. M.; Mrovec, M.; Gumbsch, P.
2013. Modelling and Simulation in Materials Science and Engineering, 21 (5), 055023/1–18. doi:10.1088/0965-0393/21/5/055023 

Two modes of HVPE growth von GaN and related macrodefects
Voronenkov, V. V.; Bochkareva, N. I.; Gorbunov, R. I.; Latyshev, P. E.; Lelikov, Y. S.; Rebane, Y. T.; Tsyuk, A. I.; Zubrilov, A. S.; Popp, U. W.; Strafela, M.; Strunk, H. P.; Shreter, Y. G.
2013. Physica Status Solidi (C), 10 (3), 468–471. doi:10.1002/pssc.201200701 

Analysis of a carbon dimer bound to a vacancy in iron using density functional theory and a tight binding model
Paxton, A. T.; Elsässer, C.
2013. Physical review / B, 87 (22), 224110/1–10. doi:10.1103/PhysRevB.87.224110 

Screened empirical bond-order potentials for Si-C
Pastewka, L.; Klemenz, A.; Gumbsch, P.; Moseler, M.
2013. Physical Review B, 87 (20), 205410/1–12. doi:10.1103/PhysRevB.87.205410 

A Look Ahead to the Second World Congress on Integrated Computational Materials Engineering
Li, M.; Campbell, C.; Thornton, K.; Holm, E.; Gumbsch, P.
2013. Journal of the Minerals, Metals & Materials Society, 65 (5), 583. doi:10.1007/s11837-013-0596-1 

Surface state defining factors as key to the strength of ceramic micro parts
Müller, M.; Cetinel, F. A.; Rögner, J.; Bauer, W.; Knitter, R.
2013. Microsystem Technologies, 19 (4), 555–561. doi:10.1007/s00542-012-1657-z 

The effect of micro-alloying with Zr and Nb on the oxidation behavior of Fe₃Al and FeAl alloys
Janda, D.; Fietze, H.; Galetz, M. C.; Heilmaier, M.
2013. Intermetallics, 41, 51–57. doi:10.1016/j.intermet.2013.04.016 

Influence of microstructure and processing on mechanical properties of advanced Nb-silicide alloys
Seemüller, C.; Heilmaier, M.; Hartwig, T.; Mulser, M.; Adkins, N.; Wickins, M.
2013. MRS online proceedings library, 1516, 317–322. doi:10.1557/opl.2012.1655 

Process Simulation of Single and Dual Frequency Induction Surface Hardening Considering Magnetic Nonlinearity
Schwenk, M.; Fisk, M.; Cedell, T.; Hoffmeister, J.; Schulze, V.; Lindgren, L.-E.
2013. Materials Performance and Characterization, 1 (1), MPC104374/1–20. doi:10.1520/MPC104374 

Finite-Elemente-Analyse des Prozesses Profil-Querwalzen zur Beschreibung des Materialfließens und des Versagensmechanismus im Verzahnungsinneren
Benes, P.; Hoffmeister, J.; Schulze, V.; Selten, M.
2013. 4. Fachkongress zur Getriebeproduktion (GETPRO’13), Würzburg, 5.-6. März 2013 [Konferenz] 

Rapid Prototyping of a Frequency Hopping Ad Hoc Network System
Braun, M.; Otterbach, N.; Elsner, J.; Jondral, F. K.
2013. Proceedings of 23rd Virginia Tech Symposium on Wireless Communications, Blacksburg, May 2013  

Distributed Localized Interference Avoidance for Dynamic Frequency Hopping ad hoc Networks
Koslowski, S.; Elsner, J. P.; Jondral, F. K.; Couturier, S.; Keip, C.; Bettinger, O.
2013. 2013 Wireless Innovation Forum Conference on Communications Technologies and Software Defined Radio (SDR-WInnComm-2013), Washington D.C., Jan. 8-10, 2013  

Zyto- und Genotoxizität von nano- und mikroskaligem Kupferoxid: Einfluss der Bioverfügbarkeit. PhD dissertation
Semisch, A.
2013. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000036317  

Optimierung des Schmiermittelangebots zur Steigerung der Energieeffizienz von hydrodynamischen Gleitlagern mittels Körperschallanalyse. PhD dissertation
Nguyen, H. T.
2013. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000036316  

Investigation of coherent microscopic defects inside the tunneling barrier of a Josephson junction. PhD dissertation
Grabovskij, G. J.
2013. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000036315  

Synthesis of isotope labelled and photoactivatable N-acyl-L-homoserine lactones - inter kingdom signalling molecules. PhD dissertation
Jakubczyk, D.
2013. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000036314  

Proceedings of the 10th IEA International Workshop on Beryllium Technology, September 19 - 21, 2012, Karlsruhe, Germany (KIT Scientific Reports ; 7650)
Vladimirov, P.; Reimann, J. (Eds.)
2013. KIT Scientific Publishing. doi:10.5445/KSP/1000036313  

Greifplanung basierend auf Objektsymmetrieeigenschaften. PhD dissertation
Przybylski, M.
2013. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000036312  

Vollautomatische Segmentierung und Interpretation des arteriellen Blutgefäßbaums in CTA-Daten. PhD dissertation
Beck, T.
2013. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000036311  

Ways of Cooperation between Higher Vocational Institutions and Enterprises in Northeastern China. PhD dissertation
Yin, P.
2013. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000036310  

Amtliche Bekanntmachung. Bekanntmachungen. 2013,28: Satzung des Karlsruher Instituts für Technologie (KIT) über die Änderung der Prüfungsordnungen für die am MINT-Kolleg Baden-Württemberg beteiligten Bachelorstudiengänge vom 12. August 2013
Karlsruher Institut für Technologie. KIT (Ed.)
2013. Karlsruher Institut für Technologie (KIT)  

Experimental Determination of Process Parameters and Material Data for Numerical Modeling of Induction Hardening
Schwenk, M.; Hoffmeister, J.; Schulze, V.
2013. Journal of Materials Engineering and Performance, 22 (7), 1861–1870. doi:10.1007/s11665-013-0566-3 

Effect of Yttrium Alloying on Intermediate to High-Temperature Oxidation Behavior of Mo-Si-B Alloys
Majumdar, S.; Schliephake, D.; Gorr, B.; Christ, H.-J.; Heilmaier, M.
2013. Metallurgical and materials transactions / A, 44 (5), 2243–2257. doi:10.1007/s11661-012-1589-3 

Modelling of Strain Rate and Temperature Dependent Flow Stresses of Supercooled Austenite for AISI 4140
Schwenk, M.; Kaufmann, B.; Hoffmeister, J.; Schulze, V.
2013. Materials Science Forum, 762, 122–127. doi:10.4028/www.scientific.net/MSF.762.122 

Microstructural and micro-mechanical properties of Mo-Si-B alloyed with Y and La
Majumdar, S.; Kumar, A.; Schliephake, D.; Christ, H.-J.; Jing, X.; Heilmaier, M.
2013. Materials science and engineering / A, 573 (June), 257–263. doi:10.1016/j.msea.2013.02.053 

Characterization of Elastic Properties in Porous Silicon Carbide Preforms Fabricated Using Polymer Waxes as Pore Formers
Roy, S.; Schell, K. G.; Bucharsky, E. C.; Weidenmann, K. A.; Wanner, A.; Hoffmann, M. J.
2013. Journal of the American Ceramic Society, 96 (7), 2269–2275. doi:10.1111/jace.12341 

Influence of fiber alignment on creep in directionally solidified NiAl-10Mo in-situ composites
Seemüller, C.; Heilmaier, M.; Haenschke, T.; Bei, H.; Dlouhy, A.; George, E. P.
2013. Intermetallics, 35 (April), 110–115. doi:10.1016/j.intermet.2012.12.007 

Aeroacoustical Investigations of Skewed Axial Fans for Automotive Cooling Systems
Zayani, M.; Caglar, S.; Gabi, M.
2013. AIA-DAGA Conference on Acoustics, Merano, Italy, March 18-21, 2013 

Empirical model for the quantitative prediction of losses of radial fans based on CFD calculations
Ratter, H.; Caglar, S.; Gabi, M.
2013. 11th International Symposium on Experimental and Computational Aerothermodynamics of Internal Flows (ISAIF’13), Shenzhen, China, May 6-11, 2013 

Numerical Investigation of the Flow Inside the Combustion Chamber of a Plant Oil Stove
Pritz, B.; Werler, M.; Wirbser, H.; Gabi, M.
2013. 11th International Symposium on Experimental and Computational Aerothermodynamics of Internal Flows (ISAIF’13), Shenzhen, China, May 6-11, 2013 

Empirical model for the quantitative prediction of losses of radial fans based on CFD calculations
Ratter, H.; Caglar, S.; Gabi, M.
2013. Journal of Thermal Science, 22 (4), 304–310. doi:10.1007/s11630-013-0628-8 

Map-Set: Roadmapping und Netzwerkanalyse
Weissenberger-Eibl, M. A.; Radicke, J.; Kugler, F.
2013. Praxishandbuch Technologietransfer - Innovative Methoden zum Transfer wissenschaftlicher Ergebnisse in die industrielle Anwendung. Hrsg.: F. T. Piller, 147–164, Symposium Publishing 

Szenariotechnik im Unternehmensumfeld und in Transferzentren
Weissenberger-Eibl, M. A.; Radicke, J.; Kugler, F.
2013. Praxishandbuch Technologietransfer - Innovative Methoden zum Transfer wissenschaftlicher Ergebnisse in die industrielle Anwendung. Hrsg.: F. T. Piller, 127–145, Symposium Publishing 

Innovation - Technologie - Entrepreneurship: Gestaltungssystem der frühen Phase des Innovationsprozesses
Weissenberger-Eibl, M. A.; Koch, D. J.
2013. Cactus Group 

Simple Strategy of Overmodulation in Control of Interior Permanent Magnet Synchronous Machines for Improving Efficiency in Automotive Applications
Gemaßmer, T.; Schnarrenberger, M.; Späth, H.; Braun, M.
2013. PCIM EUROPE 2013 - International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management Nuremberg, 14-16 May 2013 - Proceedings., 231–238, VDE Verlag  

Boosting the Efficiency of Low Voltage Modular Multilevel Converters beyond 99%
Kolb, J.; Kammerer, F.; Grabherr, P.; Gommeringer, M.; Braun, M.
2013. PCIM EUROPE 2013 - International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management Nuremberg, 14-16 May 2013 - Proceedings., VDE Verlag 

Benefits of Operating Doubly Fed Induction Generators by Modular Multilevel Matrix Converters
Kammerer, F.; Gommeringer, M.; Kolb, J.; Braun, M.
2013. PCIM EUROPE 2013 - International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management Nuremberg, 14-16 May 2013 - Proceedings., CD-ROM, VDE Verlag  

Bildungsfinanzierung neu gestalten
Feld, L. P.; Haucap, J.; Wieland, V.; Wigger, B. U.
2013. Stiftung Marktwirtschaft 

Avoiding Unintended Flows of Personally Identifiable Information : Enterprise Identity Management and Online Social Networks. PhD dissertation
Labitzke, S.
2013. KIT Scientific Publishing. doi:10.5445/KSP/1000036269  

Influence of Material and Geometry on the Performance of Superconducting Nanowire Single-Photon Detectors. PhD dissertation
Henrich, D.
2013. KIT Scientific Publishing. doi:10.5445/KSP/1000036267  

Entwicklung und vergleichende Bewertung einer bildbasierten Markierungslichtsteuerung für Kraftfahrzeuge. PhD dissertation
Hörter, M. H.
2013. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000036266  

SPARC data initiative - Nitrogen species
Tegtmeier, S.; Hegglin, M. I.; Anderson, J.; Brohede, S.; Froidevaux, L.; Fuller, R.; Funke, B.; Gille, J.; Jones, A.; Kasai, Y.; Kyröla, E.; Lingenfelser, G.; Lumpe, J.; Remsberg, E.; Rozanov, A.; Smith, L. L.; Urban, J.; Clarmann, T. von; Walker, K. A.; Wang, R.
2013. SPARC Data Requirements Workshop, Frascati, I, February 20-21, 2013 

SPARC data initiative - Ozone comparisons
Tegtmeier, S.; Hegglin, M. I.; Anderson, J.; Brohede, S.; Froidevau, L.; Fuller, R.; Funke, B.; Gille, J.; Jones, A.; Kasai, Y.; Kyröla, E.; Lingenfelser, G.; Lumpe, J.; Neu, J.; Remsberg, E.; Rozanov, A.; Smith, L. L.; Toohey, M.; Urban, J.; Clarmann, T. von; et al.
2013. SPARC Data Requirements Workshop, Frascati, I, February 20-21, 2013 

The EDELWEISS DM search: Status and recent results
EDELWEISS Collaboration; Schmidt, B.
2013. Invisibles School, Durham, GB, July 10-15, 2013 

The EDELWEISS dark matter search: Results and prospects
EDELWEISS Collaboration; Schmidt, B.
2013. 21st International Conference on Supersymmetry and Unification of Fundamental Interactions (SUSY 2013), Trieste, I, August 26-31, 2013 

KATRIN, an experiment for determination of the v-mass: status and outlook
Sturm, M.
2013. 8th Internat.Workshop on the Dark Side of the Univers (DSU 2012), Armacao de Buzios, BR, June 10-15, 2012 

W7-X commissioning - Required enhancements of the ECRH control system
Braune, H.; Erckmann, V.; Jonitz, L.; Kasparek, W.; Laqua, H. P.; Michel, G.; Noke, F.; Purps, F.; Schulz, T.; Uhren, P.
2013. (W7-X ECRH Teams at IPP, IPF and KIT, Ed.), 25th Joint Russian-German Meeting on ECRH and Gyrotrons, Karlsruhe/Stuttgart/Garching, June 24-29, 2013 

The bioliq entrained flow gasifier for biomass based slurry design and operation
Sänger, A.; Mancini, M.; Weber, R.; Weigand, P.; Kolb, T.
2013. 38th International Technical Conference on Clean Coal and Fuel Systems, Clearwater, Fla., June 2-6, 2013 

The 1 MW 170 GHz conventional cavity gyrotron for ITER
Pagonakis, I. G.; Avramidis, K.; Gantenbein, G.; Illy, S.; Jelonnek, J.; Jin, J.; Piosczyk, B.; Rzesnicki, T.; Thumm, M.
2013. 25th Joint Russian-German Meeting on ECRH and Gyrotrons, Karlsruhe/Stuttgart/Garching, June 24-29, 2013 

Status of the ITER EC H&CD system
Gandini, F.; Albajar, F.; Alberti, S.; Avramidis, K.; Baruah, U.; Bigelow, T.; Bonicelli, T.; Bruschi, A.; Chavan, R.; Cismondi, F.; Darbos, C.; Denisov, G.; Dumur, A.; Farina, D.; Gantenbein, G.; Gassman, T.; Goodman, T. P.; Hanson, G.; Hogge, J. P.; Jean, O.; et al.
2013. Workshop on RF Heating Technology of Fusion Plasmas, Speyer, September 9-11, 2013 

Overview of a multi-code analysis of high power 170 GHz beams in terms of HEsub(m)̦sub(n) modes
Gandini, F.; Chirkov, A. V.; Jawla, S.; Kalaria, P.; Oda, Y.; Rzesnicki, T.; Sharma, A.; Shapiro, M.; Denisov, G.; Gantenbein, G.; Keishi, S.; Rao, L. S.; Temkin, R.
2013. Workshop on RF Heating Technology of Fusion Plasmas, Speyer, September 9-11, 2013 

Estimation of collector lifetime for the EU 1 MW, 170 GHz CW gyrotron for ITER using transient FE-analysis
Kahl, F.; Illy, S.; Jelonnek, J.
2013. Workshop on RF Heating Technology of Fusion Plasmas, Speyer, September 9-11, 2013 

The status of EU-1 MW gyrotron for ITER
Pagonakis, I. G.; Albajar, F.; Alberti, S.; Avramides, K. A.; Bonicelli, T.; Bruschi, A.; Cismondi, F.; Chelis, I.; Dumbrajs, O.; Gantenbein, G.; Hogge, J. P.; Illy, S.; Ioannidis, Z.; Jelonnek, J.; Jin, J.; Latsas, G.; Lontano, M.; Piosczyk, B.; Rozier, Y.; Rzesnicki, T.; et al.
2013. Workshop on RF Heating Technology of Fusion Plasmas, Speyer, September 9-11, 2013 

Thermo-mechanical study of the cavity deformation in the case of the 1 MW, 140 GHz CW gyrotron for W7-X
Cordova, M.; Avramidis, K.; Illy, S.; Jelonnek, J.; Wu, C.
2013. Workshop on RF Heating Technology of Fusion Plasmas, Speyer, September 9-11, 2013 

2 MW, 170 GHz coaxial-cavity short-pulse gyrotron - Investigations on electron beam instabilities and parasitic oscillations
Rzesnicki, T.; Gantenbein, G.; Illy, S.; Jelonnek, J.; Jin, J.; Pagonakis, I. G.; Piosczyk, B.; Schlaich, A.; Thumm, M.
2013. Workshop on RF Heating Technology of Fusion Plasmas, Speyer, September 9-11, 2013 

The ASDEX upgrade multi-frequency ECRH system status and plans
Wagner, D.; Stober, J.; Leuterer, F.; Monaco, F.; Müller, S.; Münich, M.; Schubert, M.; Schütz, H.; Zohm, H.; Jelonnek, J.; Thumm, M.; Scherer, T.; Strauss, D.; Gantenbein, G.; Kasparek, W.; Plaum, B.; Lechte, C.; Litvak, A. G.; Denisov, G. G.; Chirkov, A.; et al.
2013. Workshop on RF Heating Technology of Fusion Plasmas, Speyer, September 9-11, 2013 

EDELWEISS search for low mass WIMPs with a new maximum likelihood approach
Hehn, L.
2013. International School for AstroParticle Physics (ISAPP 2013), Stockholm, S, July 29 - August 6, 2013 

The data acquisition system for the EDELWEISS dark matter search
Siebenborn, B.
2013. Invisibles School, Durham, GB, July 10-15, 2013 

Mechanical fatigue testing of a TF-He-inlet prototype at cryogenic temperature
Weiss, K. P.; Westenfelder, S.; Purr, B.; Boyer, C.; Foussat, A.
2013. International Conference on Magnet Technology (MT 2013), Boston, Mass., July 14- 19, 2013 

Pluggable 56 kV instrumentation feedthrough prototypes for ITER magnets
Fietz, W. H.; Fink, S.; Fuhrmann, U.; Müller, R.; Urbach, E.; Zwecker, V.; Brummer, A.; Oberstarr, R.; Wildner, C.; Wimmer, F.; Woelfl, K.
2013. International Conference on Magnet Technology (MT 2013), Boston, Mass., July 14- 19, 2013 

Quasiparticle states in the antiferromagnetic phase of double exchange systems
Nakano, K.; Eder, R.; Ohta, Y.; Wrobel, P.
2013. European Physical Journal B, 86, 314/1–10. doi:10.1140/epjb/e2013-40214-1 

Isolated facial and meridional tris(bipyridine)Ru(II) for STM studies on Au(111)
Schramm, A.; Stroh, C.; Dössel, K.; Lukas, M.; Fuhr, O.; Löhneysen, H. von; Mayor, M.
2013. Chemical Communications, 49, 1076–1078. doi:10.1039/C2CC37904J 

Graphene on boron nitride microwave transistors driven by graphene nanoribbon back-gates
Benz, C.; Thürmer, M.; Wu, F.; Ben Aziza, Z.; Mohrmann, J.; Löhneysen, H. von; Watanabe, K.; Taniguchi, T.; Danneau, R.
2013. Applied physics letters, 102, Art.Nr. 033505. doi:10.1063/1.4788818  

Tripodal M complexes on Au(111) surfaces: Towards molecular ’lunar modules’
Schramm, A.; Stroh, C.; Dössel, K.; Lukas, M.; Fischer, M.; Schramm, F.; Fuhr, O.; Löhneysen, H. von; Mayor, M.
2013. European Journal of Inorganic Chemistry, (1), 70–79. doi:10.1002/ejic.201200928 

Background studies for the EDELWEISS dark matter experiment
EDELWEISS Collaboration; Armengaud, E.
2013. Astroparticle Physics, 47, 1–9. doi:10.1016/j.astropartphys.2013.05.004 

Automated quantitative spectroscopic analysis combining background subtraction, cosmic ray removal, and peak fitting
James, T. M.; Schlösser, M.; Lewis, R. J.; Fischer, S.; Bornschein, B.; Telle, H. H.
2013. Applied Spectroscopy, 67, 949–959. doi:10.1366/12-06766 

Investigation of a Rutherford cable using coated conductor Roebel cables as strands
Kario, A.; Vojenciak, M.; Grilli, F.; Kling, A.; Ringsdorf, B.; Walschburger, U.; Schlachter, S. I.; Goldacker, W.
2013. Superconductor Science and Technology, 26, 085019/1–6. doi:10.1088/0953-2048/26/8/085019 

Plasma facing materials lifetime in steady-state DEMO operation
Igitkhanov, Y.; Bazylev, B.; Landman, I.
2013. Fusion Science and Technology, 64, 245–249 

Electro-mechanical analysis of Roebel cables with different geometries
Barth, C.; Weiss, K. P.; Vojenciak, M.; Schlachter, S.
2013. Superconductor Science and Technology, 25, 025007/1–9. doi:10.1088/0953-2048/25/2/025007 

Degradation free epoxy impregnation of REBCO coils and cables
Barth, C.; Bagrets, N.; Weiss, K. P.; Bayer, C. M.; Bast, T.
2013. Superconductor Science and Technology, 26, 055007/1–10. doi:10.1088/0953-2048/26/5/055007 

Heat transfer in microchannels - 2012 status and research needs
Kandlikar, S. G.; Colin, S.; Peles, Y.; Garimella, S.; Pease, R. F.; Brandner, J. J.; Tuckerman, D. B.
2013. Journal of Heat Transfer, 135, 091001/1–18. doi:10.1115/1.4024354 

Extra doublets - Global analyses of Standard Model extensions. PhD dissertation
Eberhardt, O.
2013. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000036265  

Wer ist von Altersarmut bedroht?
Lewicki, M.; Wigger, B. U.
2013. Wirtschaftsdienst, 93 (7), 462–465. doi:10.1007/s10273-013-1548-7 

The new EC FP7 MatISSE project: Materials’ innovations for a safe and sustainable nuclear in Europe
Cabet, C.; Michaux, A.; Fazio, C.; Malerba, L.; Maday, M. F.; Serrano, M.; Nilsson, K. F.
2013. International Workshop on Structural Materials for Innovative Nuclear Systems, Idaho Falls, Idaho, October 7-10, 2013 

Nanoparticle surface polarity influence on the flow behavior of polymer matrix composites
Hanemann, T.
2013. Polymer Composites, 34, 1425–1432. doi:10.1002/pc.22428 

Making Light Work of Ligation: A Novel Toolbox for Photochemical Surface Design. PhD dissertation
Paulöhrl, T.
2013. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000036223  

Entwicklung und vergleichende Bewertung einer bildbasierten Markierungslichtsteuerung für Kraftfahrzeuge. PhD dissertation
Hörter, M. H.
2013. KIT Scientific Publishing. doi:10.5445/KSP/1000036222  

Charakterisierung der Akquisition von Kohlenhydraten in Ustilago maydis. PhD dissertation
Schuler, D.
2013. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000036221  

Dispersive mixing of oil in plasticized starch by extrusion processing to design functional foods. PhD dissertation
Emin, M. A.
2013. Verlag Dr. Hut 

Iminophosphoranyl-thiophosphoranyl-methan als Ligand in der Koordinationschemie der Lanthonoide und des Zinks und Polymerisationsstudien mit Erdalkalimetalborhydridkomplexen. PhD dissertation
Kuzdrowska, M.
2013. Cuvillier Verlag 

Increasing the delivery pressure of high-pressure gasoline pumps for direct injection engines by the use of ceramic components. PhD dissertation
Pfister, C.
2013. Logos Verlag Berlin. doi:10.5445/IR/1000036218  

Pt nanoparticles on N-doped carbon nanofibers with remarkable size stability during heat treatment
Peter, B.; Habereder, A.; Melke, J.; Roth, C.
2013. 5th International Conference on Fundamentals and Development of Fuel Cells (FDFC 2013), Karlsruhe, April 16-18, 2013 

Electron microscopy studies of the SEI layer and lithium plating by OsO₄-staining
Zier, M.; Scheiba, F.; Thomas, J.; Scherer, T.; Ehrenberg, H.; Eckert, J.
2013. Lithium Batteries Discussion (LiBD 2013), Arcachon, F, June 16-21, 2013  

Hydrophobic liquid-infused porous polymer surfaces for antibacterial applications
Li, J.; Kleintschek, T.; Rieder, A.; Cheng, Y.; Baumbach, T.; Obst, U.; Schwartz, T.; Levkin, P. A.
2013. ACS Applied Materials and Interfaces, 5, 6704–6711. doi:10.1021/am401532z 

Improvement factors for the design of welded joints subjected to high frequency mechanical impact treatment
Ummenhofer, T.; Weidner, P.
2013. Steel construction, 6 (3), 191–199 

invadeX10 Documentation. Release 0.5
Zwinkau, A.; Buchwald, S.; Snelting, G.
2013. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000036216  

Embedment tests parallel-to-grain and ductility aspects using various wood species
Sandhaas, C.; Ravenshorst, G. J. P.; Blass, H. J.; Van de Kuilen, J. W. G.
2013. European Journal of Wood and Wood Products, 71 (5), 599–608. doi:10.1007/s00107-013-0718-z 

The willingness to pay for higher education: does the type of fee matter?
Bruckmeier, K.; Fischer, G.-B.; Wigger, B. U.
2013. Applied economics letters, 20 (13), 1279–1282. doi:10.1080/13504851.2013.799745 

Mikrostruktur, Verformung und Lebensdauer der Legierung Alloy 617B: Experimente, Modelle und Bauteilvorhersagen. PhD dissertation
Maier, G.
2013. Shaker Verlag 

Do Wage Cuts Damage Work Morale? Evidence from a Natural Field Experiment
Kube, S.; Marechal, M. A.; Puppe, C.
2013. Journal of the European Economic Association, 11 (4), 853–870. doi:10.1111/jeea.12022 

Entwicklung von Assays zur Untersuchung der Reaktion von Leukozyten auf immobilisiertes Interleukin-8 und kleine Moleküle. PhD dissertation
Girrbach, M.
2013. Mensch und Buch Verl 

Cooperative effects in non-cylic and cyclic FeIII/4f coordination clusters. PhD dissertation
Baniodeh, A. J. M.
2013. Cuvillier Verlag 

The molecular function of CD44v6 for the receptor tyrosine kinases Met and VEGFR-2. PhD dissertation
Volz, Y.
2013. Karlsruher Institut für Technologie (KIT) 

Urban impacts on the water quality of selected water bodies in the Three Gorges Reservoir, China
Reid, L.; Holbach, A.; Hu, W.; Wang, L.; Chen, H.; Zheng, B.; Norra, S.
2013. European Geosciences Union General Assembly 2013, 07.-12.04.2013, Vienna, Austria [Konferenz] 

High temperature superconduction current leads: A necessary tool for superconducting applications
Weiss, K. P.; Bayer, C.; Barth, C.; Bagrets, N.; Goldacker, W.
2013. Annual Meeting of the Deutscher Kaelte und Klimatechnischer Verein 2012 / Deutsche Kaelte-Klima-Tagung 2012, Würzburg, 21.-23. November 2012 Proceedings. Vol.1, 204, Curran 

Jahresbericht 2012 / Institut für Angewandte Informatik (KIT Scientific Reports ; 7648)
Haffner, H. (Ed.)
2013. KIT Scientific Publishing. doi:10.5445/KSP/1000036146