Application of INTDOSKIT tool for assessment of uncertainties on dose coefficients for ingestion of uranium by workers
Makumbi, T.; Breustedt, B.; Raskob, W.; Ottenburger, S. S.
2025. Radiation Physics and Chemistry, 226, Article no:112247. doi:10.1016/j.radphyschem.2024.112247  

Evaluation of a decomposition-based interpolation method for fourth-order fiber-orientation tensors: An eigensystem approach
Bauer, J. K.; Krauß, C.; Blarr, J.; Kinon, P. L.; Kärger, L.; Böhlke, T.
2025. Mathematics and Mechanics of Solids, 30 (3), 641–678. doi:10.1177/10812865241241002  

Towards Learning Object Detectors with Limited Data for Industrial Applications. PhD dissertation
Guirguis, K.
2025. KIT Scientific Publishing. doi:10.5445/KSP/1000174849  

Investigation of the potential of in-line particle concentration measurements in gas particle separation processes by using low-cost particulate matter sensors
Reinke, F.; Meyer, J.; Dittler, A.
2025. Journal of Aerosol Science, 183, Art.-Nr.: 106476. doi:10.1016/j.jaerosci.2024.106476 

Efficient Approximation of Varying Fiber Orientation States in Injection Molded Parts Under Consideration of Multiple Manufacturing Uncertainties
Wittemann, F.; Krauß, C.; Kärger, L.
2025. Applied Composite Materials, 32 (1), 149–172. doi:10.1007/s10443-024-10268-3  

Influence of Lube Oil and Fuel Additives on the Particulate Raw Emission Behavior of Gasoline Engines
Böhmeke, C.; Heinz, L.; Wagner, U.; Koch, T.
2025. SAE International Journal of Fuels and Lubricants, 18 (1), 04–18. doi:10.4271/04-18-01-0004 

Ion chromatography coupled with optical emission spectrometry (IC-ICP-OES) methodology for the analysis of inositol phosphates in food and feed
Henninger, C.; Stadelmann, T.; Heid, D.; Ochsenreither, K.; Eisele, T.
2025. Food Chemistry, 463 (Part 4), Art.-Nr.: 141437. doi:10.1016/j.foodchem.2024.141437 

Model-Based Testing of Quantum Computations
Lochau, M.; Schaefer, I.
2025. Tests and Proofs : 18th International Conference, TAP 2024, Milan, Italy, September 9–10, 2024, Proceedings, Ed.: M. Huisman, F. Howar, 127 – 147, Springer Nature Switzerland. doi:10.1007/978-3-031-72044-4_7 

Free Facts: An Alternative to Inefficient Axioms in Dafny
Bordis, T.; Leino, K. R. M.
2025. Formal Methods : 26th International Symposium, FM 2024, Milan, Italy, September 9–13, 2024, Proceedings, Part I. Ed.: A. Platzer, K.Y Rozier, M. Pradella, M. Rossi, 151 – 169, Springer Nature Switzerland. doi:10.1007/978-3-031-71162-6_8  

Solving stationary nonlinear Fokker-Planck equations via sampling
Li, L.; Tang, Y.; Zhang, J.
2025. SIAM journal on applied mathematics, 85 (1), 249–277. doi:10.1137/23M1616054 

Experimental validation of escape mechanisms in a bi-stable potential well
Genda, A.; Fidlin, A.; Gendelman, O.
2025. Nonlinear Dynamics, 113 (3), 1983–2000. doi:10.1007/s11071-024-10344-0  

Designing AI Assistants for Novices: Bridging Knowledge Gaps in Onboarding
Holstein, J.; Müller, P.; Vössing, M.; Fromm, H.
2025. 58th Hawaii International Conference on Systems Sciences, Waikoloa, 7th-10th January 2025, Association for Information Systems (AIS) 

Approach to Improve the Reproducibility and to Decrease the Deformation During Diffusion Bonding of Parts with Arbitrary Geometries
Gietzelt, T.; Toth, V.; Levchenko, F.; Kraut, M.
2025. 2nd International Conference on Engineering Manufacture 2024 – Selected Contributions of EM 2024. Ed.: L.M. da Silva, 75–82, Springer Nature Switzerland. doi:10.1007/978-3-031-68815-7_6 

Longitudinal perspectives on technology acceptance: Teachers’ integration of digital tools through the COVID-19 transition
Wohlfart, O.; Wagner, I.
2025. Education and Information Technologies, 30 (5), 6091–6115. doi:10.1007/s10639-024-12954-y  

Transfer learning in robotics: An upcoming breakthrough? A review of promises and challenges
Jaquier, N.; Welle, M. C.; Gams, A.; Yao, K.; Fichera, B.; Billard, A.; Ude, A.; Asfour, T.; Kragic, D.
2025. The International Journal of Robotics Research, 44 (3), 465–485. doi:10.1177/02783649241273565  

In situ ex-solution of CoFeRu solid solution nanoparticles from non-stoichiometric (LaSr)CoFeRuO perovskite for hydrogen gas sensor
Sharma, B.; Kumar, M.; Sharma, A.
2025. Sensors and Actuators B: Chemical, 422, Art.-Nr.: 136529. doi:10.1016/j.snb.2024.136529  

Uncertainty Quantification-Based Multi-Objective Optimization Design of Electrical Machines Using Probabilistic Metamodels
Chen, N.; Digel, C.; Doppelbauer, M.
2025. IEEE Transactions on Energy Conversion, 40 (2), 860–872. doi:10.1109/TEC.2024.3454755 

Analysis of Separation in the Roughness Sublayer Using DNS Data and DANS/DEM Modelling of Roughness Effects
Chedevergne, F.; Yang, J.; Stroh, A.; Forooghi, P.
2025. Flow, Turbulence and Combustion, 114 (3), 713–735. doi:10.1007/s10494-024-00585-9  

A bisection method for solving distance-based clustering problems globally
Kirst, P.; Bajbar, T.; Merkel, M.
2025. TOP, 33 (3), 437–469. doi:10.1007/s11750-024-00684-w  

Multifacets of lossy compression for scientific data in the Joint-Laboratory of Extreme Scale Computing
Cappello, F.; Acosta, M.; Agullo, E.; Anzt, H.; Calhoun, J.; Di, S.; Giraud, L.; Grützmacher, T.; Jin, S.; Sano, K.; Sato, K.; Singh, A.; Tao, D.; Tian, J.; Ueno, T.; Underwood, R.; Vivien, F.; Yepes, X.; Kazutomo, Y.; Zhang, B.
2025. Future Generation Computer Systems, 163, Art.-Nr.: 107323. doi:10.1016/j.future.2024.05.022 

Low velocity impact resistance of hybrid CFRP ‐elastomer‐metal laminates: Influence of stacking sequence and impact conditions on damage mechanisms
Li, Z.; Jackstadt, A.; Zhang, J.; Liebig, W. V.; Kärger, L.
2025. Polymer Composites, 46 (1), 817–831. doi:10.1002/pc.29028 

Strategic alloy design and processing for improved mechanical response in the Mo-Si-Ti system
Vikram, R. J.; Schliephake, D.; Namadi, M.; Choudhury, A.; Kauffmann, A.; Suwas, S.; Heilmaier, M.
2025. Scripta Materialia, 255, Art.-Nr.: 116341. doi:10.1016/j.scriptamat.2024.116341  

Non-linear mechanical behaviour of thermoplastic elastomeric materials and its vulcanizate under tension/tension fatigue deformation by fourier transform rheological studies
Awasthi, P.; Banerjee, P. S.; Hirschberg, V.; Banerjee, S. S.
2025. Progress in Rubber, Plastics and Recycling Technology, 41 (3), 287–301. doi:10.1177/14777606241270513 

Learning to Predict Vehicle Trajectories for Autonomous Driving from Latent Features. PhD dissertation
Janjoš, F.
2025, February 25. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000174384  

Relationship between nonexercise activity and mood in patients with eating disorders
Olfermann, R.; Schlegel, S.; Vogelsang, A.; Ebner-Priemer, U.; Zeeck, A.; Reichert, M.
2025. Acta Psychiatrica Scandinavica, 151 (3), 448–462. doi:10.1111/acps.13757  

Occupant-Oriented Demand Response with Model Predictive Heating Control in a Multi-Zone Residential Building. PhD dissertation
Frahm, M.
2025. KIT Scientific Publishing. doi:10.5445/KSP/1000174319  

Synthesis, Structural Analysis, and Degradation Behavior of Potassium Tin Chloride as Chloride‐Ion Batteries Conversion Electrode Material
Panja, S.; Miao, Y.; Döhn, J.; Choi, J.; Fleischmann, S.; Guddehalli Chandrappa, S.; Diemant, T.; Groß, A.; Karkera, G.; Fichtner, M.
2025. Advanced Functional Materials, 35 (3), Art.-Nr.: 2413489. doi:10.1002/adfm.202413489  

Engaging in Data Ecosystems: Propositions for Design Characteristics to Foster Value Co-Creation
Fassnacht, M.; Benz, C.; Riefle, L.; Fromm, H.; Satzger, G.
2025. HICSS 2025 - 58th Hawaii International Conference on Systems Sciences, Waikoloa, 7th-10th January 2025, Association for Information Systems (AIS) 

Suppressed Degradation Process of Green‐Solvent Based Organic Solar Cells Through ZnO Modification With Sulfhydryl Derivatives
Li, Z.; Li, Y.; Zhang, J.; Guo, R.; Sun, K.; Jiang, X.; Wang, P.; Tu, S.; Schwartzkopf, M.; Li, Z.; Ma, C.-Q.; Müller-Buschbaum, P.
2025. Advanced Energy Materials, 15 (4), Art.-Nr.: 2402920. doi:10.1002/aenm.202402920  

Omniphobic Photoresist-Assisted Patterning of Porous Polymethacrylate Films
Kartsev, D. D.; Lukianov, I. M.; Sharapenkov, E. G.; Prilepskii, A. Y.; Levkin, P. A.
2025. Advanced materials interfaces, 12 (1), Art.-Nr.: 2400569. doi:10.1002/admi.202400569  

Towards Sustainable Direct Recycling: Unraveling Structural Degradation Induced by Thermal Pretreatment of Lithium‐Ion Battery Electrodes
Liu, S.; Dolotko, O.; Bergfeldt, T.; Knapp, M.; Ehrenberg, H.
2025. ChemSusChem, 18 (1), Art.-Nr: e202400727. doi:10.1002/cssc.202400727  

FeynCalc 10: Do multiloop integrals dream of computer codes?
Shtabovenko, V.; Mertig, R.; Orellana, F.
2025. Computer Physics Communications, 306, Art.-Nr.: 109357. doi:10.1016/j.cpc.2024.109357  

Multiphase-field modeling of domain structure evolution in ferroelectric thin film
Fan, L.; Reder, M.; Schneider, D.; Hinterstein, M.; Nestler, B.
2025. Journal of the European Ceramic Society, 45 (1), Art.-Nr.: 116875. doi:10.1016/j.jeurceramsoc.2024.116875  

Hochgenaue und robuste odometriebasierte Lokalisierung in einem Parkvorgang. PhD dissertation
Brunker, A.
2025. KIT Scientific Publishing. doi:10.5445/KSP/1000174155  

Enhancement of polyurea grease performance through graphene oxide-functionalized polyurea thickeners: A novel hydrogen-bond network approach
Ren, G.; Zhou, C.; Fan, X.; Dienwiebel, M.; Wang, S.; Li, Y.
2025. Tribology International, 201, 110123. doi:10.1016/j.triboint.2024.110123 

Structuring different manifestations of misinformation for better policy development using a decision tree‐based approach
Hägle, O.; Escher, S.; Heil, R.; Jahnel, J.
2025. Policy & Internet, 17 (2). doi:10.1002/poi3.420  

Periodic waveguides revisited: Radiation conditions, limiting absorption principles, and the space of bounded solutions
Kirsch, A.; Schweizer, B.
2025. Mathematical Methods in the Applied Sciences, 48 (2), 2267–2293. doi:10.1002/mma.10435  

Playing Regulatory Catch-up? – The Relevance of EDPB Guidelines 2/2023 on the Technical Scope of Art. 5(3) of the ePrivacy Directive
Idelberger, F.
2025. GRUR International, 74 (3), 247–252. doi:10.1093/grurint/ikae095 

Scalable Estimation for Structured Additive Distributional Regression
Umlauf, N.; Seiler, J.; Wetscher, M.; Simon, T.; Lang, S.; Klein, N.
2025. Journal of Computational and Graphical Statistics, 34 (2), 601–617. doi:10.1080/10618600.2024.2388604 

Exploring the possibility of aluminum plating/stripping from a non‐corrosive Al(OTf)3‐based electrolyte
Talari, M.; Sarapulova, A.; Zemlyanushin, E.; Sabi, N.; Hofmann, A.; Trouillet, V.; Dsoke, S.
2025. Batteries & Supercaps, 8 (1), Art.-Nr.: 202400317. doi:10.1002/batt.202400317  

CFD Validation of Forced and Natural Convection for the Open Phase of IAEA Benchmark CRP-I31038
Batta, A.; Class, A. G.
2025. Arabian Journal for Science and Engineering, 50 (5), 3409–3415. doi:10.1007/s13369-024-09480-x  

Experimental Demonstration of the Production of Hydrogen and Water‐Free Formaldehyde Using Sodium Vapor
Kamienowska, M.; Deutschmann, M. P.; Bender, M.; Stoppel, L.; Daubner, M.; Wetzel, T.; Niedermeier, K.
2025. Chemie Ingenieur Technik, 97 (1-2), 90–100. doi:10.1002/cite.202400007  

Integrating European contexts and needs into WHO guiding principles on online mental health content for young people: five recommendations
Ludwig-Walz, H.; Bujard, M.; Fegert, J.; Fegert, J. M.
2025. European Child & Adolescent Psychiatry, 34 (3), 1221–1224. doi:10.1007/s00787-024-02566-9  

Quantifying and combining uncertainty for improving the behavior of Digital Twin Systems
Deantoni, J.; Muñoz, P.; Gomes, C.; Verbrugge, C.; Mittal, R.; Heinrich, R.; Bellis, S.; Vallecillo, A.
2025. Automatisierungstechnik, 73 (2), 81–99. doi:10.1515/auto-2024-0036 

Gaming with Etiquette: Exploring Courtesy as a Game Mechanic in Speech-Based Games
Zargham, N.; Dratzidis, L. T.; Alexandrovsky, D.; Friehs, M. A.; Malaka, R.
2025. International Journal of Human–Computer Interaction, 41 (11), 6968–6986. doi:10.1080/10447318.2024.2387901  

Hybrid dynamical systems logic and its refinements
Platzer, A.
2025. Science of Computer Programming, 239, Art.-Nr.: 103179. doi:10.1016/j.scico.2024.103179  

How gender differences in informal networking result in unequal access to interorganizational R&D projects
Roth, P.; Haupt, A.
2025. Innovation: The European Journal of Social Science Research, 38 (1), 397–418. doi:10.1080/13511610.2024.2380368  

Linguistic style as a digital marker for depression severity: An ambulatory assessment pilot study in patients with depressive disorder undergoing sleep deprivation therapy
Hartnagel, L.-M.; Ebner-Priemer, U. W.; Foo, J. C.; Streit, F.; Witt, S. H.; Frank, J.; Limberger, M. F.; Horn, A. B.; Gilles, M.; Rietschel, M.; Sirignano, L.
2025. Acta psychiatrica Scandinavica, 151 (3), 348–357. doi:10.1111/acps.13726  

Time Matters: Analyzing the Impact of Nighttime on Commuter Trip Chaining Behavior and Travel Time Use in Karlsruhe, Germany
Kapitza, J.
2025. Transportation Research Record: Journal of the Transportation Research Board, 2679 (2), 1242–1256. doi:10.1177/03611981241265843  

Project selection and scheduling with multiplicative enhancement effects and delay risk: An application in intelligent manufacturing technologies
Liu, X.; Liang, J.; Zhang, Z.- hai; Yang, S.; Peukert, S.; Lanza, G.
2025. IISE Transactions, 57 (8), 873–889. doi:10.1080/24725854.2024.2374090 

Fast pyrolysis of the waste lignocellulosic phloem fraction of Quercus cerris bark in a twin-screw reactor
Sen, U.; Fonseca, F. G.; Chi, Y.; Pereira, H.; Funke, A.
2025. Biomass Conversion and Biorefinery, 15 (7), 10251–10260. doi:10.1007/s13399-024-05921-7  

Socio-structural determinants of physical activity behavior in children and adolescents: The importance of social support
Wolbring, L.; Jekauc, D.; Hinz, T.; Burchartz, A.; Kolb, S.; Schmidt, S. C. E.; Woll, A.; Wäsche, H.
2025. International Review for the Sociology of Sport, 60 (2), 212–230. doi:10.1177/10126902241266615  

Quantifying the intensity of high-frequency mechanical impact treatment
Schubnell, J.; Hanji, T.; Tateishi, K.; Gkatzogiannis, S.; Ummenhofer, T.; Farajian, M.
2025. Welding in the World, 69 (1), 125–137. doi:10.1007/s40194-024-01812-7  

Incentive system to smooth out fluctuations in demand
Martin, M.; Gneiting, S.; Benfer, M.; Lanza, G.
2025. Production Engineering, 19 (1), 157–171. doi:10.1007/s11740-024-01300-3  

Fabrication of Smooth, Periodic Surface Structures: Combining Direct Laser Interference Patterning and Electropolishing
Schäfer, C.; Delfino, P. M.; Leonhard-Trautmann, P.; Ott, V.; Suarez, S.; Stüber, M.; Mücklich, F.; Pauly, C.
2025. Advanced Engineering Materials, 27 (3), Art.-Nr.: 2400435. doi:10.1002/adem.202400435  

In Situ Formation of Gel Electrolyte with Enhanced Diffusion Kinetics and Stability for Achieving Fast‐Charging Li‐Ion Batteries
Liu, X.; Guo, L.; Zhang, Z.; Wang, J.; Lin, H.; Li, G.; Ou, X.; Wang, D.; Zheng, W.
2025. Advanced Functional Materials, 35 (3), Art.-Nr.: 2408525. doi:10.1002/adfm.202408525  

Molecular weight cut off (MWCO) determination in ultra- and nanofiltration: Review of methods and implications on organic matter removal
Imbrogno, A.; Calvo, J. I.; Breida, M.; Schwaiger, R.; Schäfer, A. I.
2025. Separation and Purification Technology, 354 (Part 2), Art.-Nr.: 128612. doi:10.1016/j.seppur.2024.128612  

The rise of large language models: challenges for Critical Discourse Studies
Gillings, M.; Kohn, T.; Mautner, G.
2025. Critical Discourse Studies, 22 (6), 625–641. doi:10.1080/17405904.2024.2373733  

Investigation of Copper and Brass Nanoparticles for the CO2 Reduction in Organic Electrolytes
Witzel, R.; Wildersinn, L.; Czioska, S.; Tusini, E.; Dorner, I.; Zimina, A.; Grunwaldt, J.-D.; Röse, P.
2025, October 16. doi:10.35097/yHRzUdfUUFDRzWDr 

Fit2Ear Dataset
Zhao, H.; Röddiger, T.; Feng, Y.; Beigl, M.
2025, March 5. doi:10.35097/LuEUQApwxQrvGfKm 

Temporal analysis of topic modeling output by machine learning techniques
Azizi, F.; Vahdat-Nejad, H.; Hajiabadi, H.
2025. International Journal of Data Science and Analytics, 20 (3), 2175–2225. doi:10.1007/s41060-024-00583-0  

Cluster Validation Based on Fisher’s Linear Discriminant Analysis
Kächele, F.; Schneider, N.
2025. Journal of Classification, 42 (1), 54–71. doi:10.1007/s00357-024-09481-3  

Mechanical Properties and Corrosion Behavior of Hexagonal Boron Nitride and α-Al2O3w Hybrid Reinforced Laminated Cu Matrix Composites
Li, Z.; Jiang, X.; Sun, H.; Pang, Y.; Wu, Z.; Yang, L.
2025. Journal of Materials Engineering and Performance, 34 (11), 10229–10243. doi:10.1007/s11665-024-09764-1  

Integrated shelf-life rules for multi-level pharmaceutical tablets manufacturing processes
Simonis, M.; Nickel, S.
2025. International Journal of Production Research, 63 (3), 1046–1066. doi:10.1080/00207543.2024.2370510  

Lancaster correlation: A new dependence measure linked to maximum correlation
Holzmann, H.; Klar, B.
2025. Scandinavian Journal of Statistics, 52 (1), 145–169. doi:10.1111/sjos.12733  

Time-consistency in the mean-variance problem: A new perspective
Bäuerle, N.; Jaśkiewicz, A.
2025. IEEE Transactions on Automatic Control, 70 (1), 251–262. doi:10.1109/TAC.2024.3420413 

Designing Gaze-Adaptive Visualizations of Mutual Gaze for Video Meetings
Reuscher, T. F.; Seitz, J.; Greif-Winzrieth, A.; Langner, M.; Soballa, K.; Maedche, A.; Nieken, P.
2025. Information Systems and Neuroscience NeuroIS Retreat 2024, Vienna, Austria. Ed. F. Davis, 247–255, Springer. doi:10.1007/978-3-031-71385-9_21 

Constrained-layer damping in hybrid fibre metal elastomer laminates and its tolerance to damage. PhD dissertation
Jackstadt, A.
2025. doi:10.5445/KSP/1000172235  

Harmonizing corporate venturing dimensions and its characteristics: a systematic analysis
Dall, N.; Terzidis, O.; Kroß, L.
2025. Management Review Quarterly, 75 (4), 2909–2979. doi:10.1007/s11301-024-00450-z  

RuAl Thin‐Film Deposition by DC Magnetron Sputtering
Ott, V.; Wojcik, T.; Kolozsvari, S.; Polcik, P.; Schäfer, C.; Pauly, C.; Mücklich, F.; Ulrich, S.; Mayrhofer, P. H.; Riedl, H.; Stüber, M.
2025. Advanced Engineering Materials, 27 (3). doi:10.1002/adem.202400258  

Verification of the Coupled Code PARCS/TWOPORFLOW with Rod Ejection Accident Calculations for Small Modular Reactors
Campos-Muñoz, A.; Sanchez-Espinoza, V. H.; Redondo-Valero, E.; Queral, C.
2025. Nuclear Science and Engineering, 199 (sup1), 1–20. doi:10.1080/00295639.2024.2357953  

Energy Harvesting Based on Bistable Shape Memory Film Actuation. PhD dissertation
Chen, X.
2025. KIT Scientific Publishing. doi:10.5445/KSP/1000171955  

Evaluation of mechanical properties characterization of additively manufactured components
Frölich, F.; Bechtloff, L.; Scheuring, B. M.; Heuer, A. L.; Wittemann, F.; Kärger, L.; Liebig, W. V.
2025. Progress in Additive Manufacturing, 10 (2), 1217–1229. doi:10.1007/s40964-024-00700-2  

Towards a platform-portable linear algebra backend for OpenFOAM
Olenik, G.; Koch, M.; Boutanios, Z.; Anzt, H.
2025. Meccanica, 60 (6), 1659–1672. doi:10.1007/s11012-024-01806-1  

New analytical models to predict the mechanical performance of steel fiber‐reinforced alkali‐activated concrete
Rossi, L.; Patel, R. A.; Dehn, F.
2025. Structural Concrete, 26 (1), 236–247. doi:10.1002/suco.202301104  

Karst control on reservoir performance of a developed carbonate geothermal reservoir in Munich, Germany
Hörbrand, T.; Beichel, K.; Bendias, D.; Savvatis, A.; Kohl, T.
2025. Geological Society, London, Special Publications, 548 (1), 291–310. doi:10.1144/SP548-2024-42 

Conversational versus graphical user interfaces: the influence of rational decision style when individuals perform decision-making tasks repeatedly
Liu, X.; Rietz, T.; Maedche, A.
2025. Universal Access in the Information Society, 24 (2), 1157–1172. doi:10.1007/s10209-024-01122-1 

An exploration of experts’ views on the relative importance of indoor-environmental quality parameters
Mahdavi, A.; Mino-Rodriguez, I.; Berger, C.; Martínez-Muñoz, I.; Wagner, A.
2025. Building Research and Information, 53 (1-2), 3–18. doi:10.1080/09613218.2024.2350563  

Machine learning assisted discovery of effective viscous material laws for shear-thinning fiber suspensions
Sterr, B.; Hrymak, A.; Schneider, M.; Böhlke, T.
2025. Computational Mechanics, 75 (1), 51–69. doi:10.1007/s00466-024-02490-4  

Fates of slurry-nitrogen applied to mountain grasslands: the importance of dinitrogen emissions versus plant N uptake
Dannenmann, M.; Yankelzon, I.; Wähling, S.; Ramm, E.; Schreiber, M.; Ostler, U.; Schlingmann, M.; Stange, C. F.; Kiese, R.; Butterbach-Bahl, K.; Friedl, J.; Scheer, C.
2025. Biology and Fertility of Soils, 61 (3), 455–468. doi:10.1007/s00374-024-01826-9  

Complexity of non-abelian cut-and-project sets of polytopal type I: special homogeneous Lie groups
Kaiser, P.
2025. Ergodic Theory and Dynamical Systems, 45 (1), 175–217. doi:10.1017/etds.2024.38  

In Vivo Engineering and Transplantation of Axially Vascularized and Epithelialized Flaps in Rats
Mayer, S. A.; Thomas, B.; Heuer, M.; Brune, J. C.; Eras, V.; Schuster, K.; Knoedler, L.; Schaefer, R. L.; Thiele, W.; Sleeman, J. P.; Dimmler, A.; Heimel, P.; Kneser, U.; Bigdeli, A. K.; Falkner, F.
2025. Tissue Engineering - Part A, 31 (5-6), 234–243. doi:10.1089/ten.tea.2024.0037 

Silicon-Plasmonic Photodetectors for High-Speed Signal Processing. PhD dissertation
Mühlbrandt, S. J.
2025. doi:10.5445/KSP/1000170967  

Ein neues Konzept zur CO 2 ‐Bereitstellung aus Luft als Gaswäsche mit ionischen Flüssigkeiten
Kussin, P.; Stegmaier, T.; Müller, C.; Mörs, F.; Graf, F.
2025. Chemie Ingenieur Technik, 97 (1-2), 32–42. doi:10.1002/cite.202300140  

Forest practitioners’ requirements for remote sensing-based canopy height, wood-volume, tree species, and disturbance products
Fassnacht, F. E.; Mager, C.; Waser, L. T.; Kanjir, U.; Schäfer, J.; Buhvald, A. P.; Shafeian, E.; Schiefer, F.; Stančič, L.; Immitzer, M.; Dalponte, M.; Stereńczak, K.; Skudnik, M.
2025. Forestry: An International Journal of Forest Research, 98 (2), 233–252. doi:10.1093/forestry/cpae021 

Aspects of Ammonia as Green Fuel for Propulsion Systems of Inland Water Vessels
Braun, A.; Gierenz, N.; Braun, S.; Kubach, H.; Bernhardt, S.; Prehn, S.; Müller, M.; Engelmeier, L.; Fehlemann, L.; Steffen, M.; Baufeld, T.; Neuhaus, G.; Müller, K.; Mohr, H.
2025. Energy Technology, 13 (2), Art.-Nr.: 2301648. doi:10.1002/ente.202301648  

Bio-oil as a source of renewable chemicals: the chemistry of pyrolytic lignin
Silva, W. R.; Santos, T. M.; Carregosa, J. C.; Schmitt, C. C.; Raffelt, K.; Dahmen, N.; Wisniewski, A., Jr
2025. Biomass Conversion and Biorefinery, 15 (4), 5401–5418. doi:10.1007/s13399-024-05622-1  

Spectral Gap for the Cohomological Laplacian of SL 3 (ℤ)
Kaluba, M.; Mizerka, P.; Nowak, P. W.
2025. Experimental Mathematics, 34 (1), 53–58. doi:10.1080/10586458.2024.2333722 

The anaerobic soil volume as a controlling factor of denitrification: a review
Schlüter, S.; Lucas, M.; Grosz, B.; Ippisch, O.; Zawallich, J.; He, H.; Dechow, R.; Kraus, D.; Blagodatsky, S.; Senbayram, M.; Kravchenko, A.; Vogel, H.-J.; Well, R.
2025. Biology and Fertility of Soils, 61 (3), 343–365. doi:10.1007/s00374-024-01819-8  

How strength asymmetries shape multi-sided conflicts
Cortes-Corrales, S.; Gorny, P. M.
2025. Economic Theory, 79 (1), 235–274. doi:10.1007/s00199-024-01569-6  

Local Housing Policies and Corporate Social Financial Logics: Insights from the Financialization of Housing in Barcelona
Alexandri, G.; Janoschka, M.
2025. Housing, Theory and Society, 42 (1), 41–59. doi:10.1080/14036096.2024.2328633  

A Formal Model of Affiliative Interpersonality
Westermann, S.; Banisch, S.
2025. Clinical Psychological Science, 13 (1), 43–68. doi:10.1177/21677026241229663 

Conceptualizing the landscape of digital health entrepreneurship: a systematic review and research agenda
Weimar, S. N.; Martjan, R. S.; Terzidis, O.
2025. Management Review Quarterly, 75 (2), 1619–1667. doi:10.1007/s11301-024-00417-0  

Measures of kurtosis: inadmissible for asymmetric distributions?
Eberl, A.; Klar, B.
2025. Metrika, 88 (3), 365–391. doi:10.1007/s00184-024-00959-z  

Analyse von Störungen und Dispositionen im ÖPNV. PhD dissertation
Briem, L.
2025. doi:10.5445/KSP/1000169913  

Alternative feature selection with user control
Bach, J.; Böhm, K.
2025. International Journal of Data Science and Analytics, 20 (2), 1305–1327. doi:10.1007/s41060-024-00527-8  

A new incubation system to simultaneously measure N as well as NO and CO fluxes from plant-soil mesocosms
Yankelzon, I.; Willibald, G.; Dannenmann, M.; Malique, F.; Ostler, U.; Scheer, C.; Butterbach-Bahl, K.
2025. Biology and Fertility of Soils, 61 (3), 401–419. doi:10.1007/s00374-024-01809-w  

Steigerung der thermischen Stabilität von warm- und kaltgewalztem Wolfram durch Kalium-Dotierung für die Fusionsenergietechnik. PhD dissertation
Lied, P.
2025. doi:10.5445/KSP/1000169486  

Process Engineering Analysis of Transport Options for Green Hydrogen and Green Hydrogen Derivatives
Staudt, C.; Hofsäß, C.; Lewinski, B. von; Mörs, F.; Prabhakaran, P.; Bajohr, S.; Graf, F.; Kolb, T.
2025. Energy Technology, 13 (2), Art.-Nr.: 2301526. doi:10.1002/ente.202301526  

Lysimeter-based full fertilizer 15N balances corroborate direct dinitrogen emission measurements using the 15N gas flow method
Yankelzon, I.; Schilling, L.; Butterbach-Bahl, K.; Gasche, R.; Han, J.; Hartl, L.; Kepp, J.; Matson, A.; Ostler, U.; Scheer, C.; Schneider, K.; Tenspolde, A.; Well, R.; Wolf, B.; Wrage-Moennig, N.; Dannenmann, M.
2025. Biology and Fertility of Soils, 61 (3), 437–454. doi:10.1007/s00374-024-01801-4